This engine looks as it had been in a crashed plane. As you can see, also the inside is very dirty, so it might have sucked a lot of dirt, causing damage to all parts inside. Since I have seen a turbine blowing up mid air, I would not put that into a model any more, to not harm people. So for me it is ok to disassemble it even with that care shown in the video.
TrippleZ3D it will never run again. He destroyed the rear compressor blade and totally wreck d the fuel distribution plumbing. He's got about a $2600.00 pile of bits n pieces.
I want purchasing 50 kg power micro turbine engine please help me where is available show the contact of company or market will I get there sexy comedy
You all prolly dont give a damn but does anybody know a trick to log back into an instagram account? I stupidly lost the password. I would love any tricks you can give me
@Bowie Samir Thanks so much for your reply. I found the site through google and Im in the hacking process now. Takes a while so I will reply here later with my results.
How much fun is pulling stuff apart to see what’s inside, and how it works!! I spent hours doing stuff like this as a youth. Some went back together, most didn’t, haha. Nice clip.
By the looks of it it seems to have oxidized and ingested massive amounts of fod. I think it was envoled in a crash because the side mounts are bent out of axis. Most likely beyond economical repair.
Its possible for other persons to repair that. It hurts to see that guy take a saw and cut this AMT Engine into pices, because he have no idea how to remove each part! He cut the shaft because he dont know that you loosen the nut in right turn.
That was interesting. We think these engines are expensive. Look at all the components that must be made, out of stainless, to close tolerances. It's amazing these are available at all.
BEEN WONDERING WHAT'S INSIDE THESE FOR A LONG TIME. THANKS FOR DOING THE VIDEO! (IGNORE THE NEGATIVE COMMENTS. OBVIOUSLY TOO DULL TO GET THE POINT OF THIS VIDEO).
The central shafts in the static housing were ground away. My guess is those two parts shot totaled the engine. It was not inspected regularly since it was so dirty inside and it was run with a bad bearing until it seized.
That "dirt" is mainly water corrosion, the engine has clearly been submerged at some point. besides that the main components of the engine with the exception of the bearings and possibly the main shaft were salvagable. if you look closely there were no signs of the turbine or compressor wheel having made contact with the housing or stator ring.
If this is educational, would have been great if there were some words on the screen that tells you what all the parts are for, for us who don't know anything about jet engines
It sounded like it already had issues and was well used anyhow. Suppose he makes more than the value of fixing or replacing it from uploading this interesting video, what problem can you see with this?
A really fine piece of machinery ! These turbines are beautifully made. I’m really surprised by the conception of the first compressor: it’s « full », like there’s no blades catching air from the center rod out to the side. The air seems to be caught and compressed only from the circumference of the stage. I’m sure these are highly calculated and optimized, but i’m curious as to why the first stage compressor doesn’t have blade getting air from the whole surface instead of just the edge.
BTW: I was talking about the compressor at 3:50 . I think the reason it’s like that is because this turbine is more like a turbojet, and not a turbofan. It doesn’t use bypass air for thrust. Right ?
@@radicaltronic1855 that's Centrifugal Compressor similar to the ones used in car turbochargers, it's much simpler and safer design than Axial compressors used in modern real jet engines. Actually very first, pre WWII jet engines were using same system, British Meteor jet fighters were using engines of this type. Today all commercially available mass produced RC model jets are using CC engines, while there are Axial powered prototypes this things are insanely expensive and noone has figured out mass production of them yet.
Why is everyone uptight over this video? He took a broken jet engine apart & filmed it so we all could see what's inside. This video would probably come in handy during reassembly (if any).
It wasn't functional.. the main shaft was split in half and the ball bearings had fallen out of their sockets. My guess is that the bearings failed and sent those balls into the engine effectively destroying the engine. Breath a sigh of relief because I was there with you until I saw the whole thing.
@@ejkk9513 Not quite true, the bearings may have been destroyed but the turbine wheel and stator wheels including the turbine wheel housing were perfectly usable, a bit dirty - yes but salvagable meaning that it was not a catastrophic failure and could have been repaired relatively easily. I have done it myself with an older frank turbine engine.
Its amazingbthese things can work while being this simple. A ge90 turbofan has like tens of thousands of individual parts. This swiwin only has 100 or 200.
I am not sure why there are so many criticisms posted--I for one am glad you dissembled the jet because I have always wanted to see the inside of a jet cat. Thank you! Further, the jet clearly was not going to operate reliably given the wear shown and would have had to been rebuilt anyway. This was a very profitable video--nice job.
No, look carefully at the shaft when he tests it the second time. It retracts when there's no torque from the motor or when it's exceeded by the turbine's shaft.
So the compressor is essentially an off the shelf turbocharger compressor wheel. Interesting. I always figured it was the same as a full size jet engine compressor stage, just shrunk down.
I think the way the machine was manufactured was a perfect example of bad design. Looks to me like it not really was purposed to be serviced as evertything was welded and obstructed. It was a bit painfully to watchh but still thank you for the clip :) I solved some riddles I had.
The original vid was in Vietnamese and he muted the sound to make this version. Watch it slowly and try to understand the engine with logic and it makes great sense that no other vid on the web does that.
Why is it being disassemble in such a fashion? Many parts were still good and it could have been fully restored. Brutality!
No parts were damaged in this video 😂
Stupid teardown.. Hahha
To Some People It’s Junk Or Spare Parts.
This engine looks as it had been in a crashed plane. As you can see, also the inside is very dirty, so it might have sucked a lot of dirt, causing damage to all parts inside. Since I have seen a turbine blowing up mid air, I would not put that into a model any more, to not harm people. So for me it is ok to disassemble it even with that care shown in the video.
@@Maxfahrer good observation, so different to so many stupids that don't see the real idea behind the intention of the video.
You know what would be creative,to go and reassemble this engine to work again!
TrippleZ3D it will never run again. He destroyed the rear compressor blade and totally wreck d the fuel distribution plumbing. He's got about a $2600.00 pile of bits n pieces.
My heart dropped thinking about this daunting task. Hahaha
Lol
I want purchasing 50 kg power micro turbine engine please help me where is available show the contact of company or market will I get there sexy comedy
@@shabbirahmedmahmoodkhan1002 pratt and whitney 135
Watching the turbine get pulled out with pliers gave me anxiety
Dude it's a broken turbine. Relax
You all prolly dont give a damn but does anybody know a trick to log back into an instagram account?
I stupidly lost the password. I would love any tricks you can give me
@Gatlin Wesson Instablaster ;)
@Bowie Samir Thanks so much for your reply. I found the site through google and Im in the hacking process now.
Takes a while so I will reply here later with my results.
How much fun is pulling stuff apart to see what’s inside, and how it works!! I spent hours doing stuff like this as a youth. Some went back together, most didn’t, haha.
Nice clip.
But why did you do that. That's like one of the best engine ever. That was a nightmare
I agree.. I watched this in horror.. he didn't have to cut it..
I can make better of this do you want rc engine with 5000 trust ha
@@galaxymyt4834 . Yes I want
Curiousity versus Reverse Engineering versus Stupidity
It's his money? He can do whatever TF he wants to.
Ok,so let’s see you put
It back together !
😂🤣😅
He's going to have extra parts.... I call them "spares".
Ikuul mm egoístai3838e8e
i heard u like 2 girls in the woods
Hhhhhh lol man
Great, no whacko music. Thanks
huh. I honestly expected more stages in one of those types, but it basically is just some kind of linear tube turbo. Neat.
2mxs b52 pwtf33...
this video is so cool!😄 my favorite part is the tiny little combustion can!
Great upload, don't be put off by the narrow minded among us, broader minds appreciate this. Thank you!
Shame, that engine costs like 2800$ and is a fine pice of machinery, it could be restored, but nooo, lets cut it open for fun😢
True this video hurts to watch
I dont think it can be repaired by common tools.
@@Kal-0000 sure
By the looks of it it seems to have oxidized and ingested massive amounts of fod. I think it was envoled in a crash because the side mounts are bent out of axis. Most likely beyond economical repair.
Its possible for other persons to repair that. It hurts to see that guy take a saw and cut this AMT Engine into pices, because he have no idea how to remove each part! He cut the shaft because he dont know that you loosen the nut in right turn.
That was interesting. We think these engines are expensive. Look at all the components that must be made, out of stainless, to close tolerances. It's amazing these are available at all.
Wow... What a machine! 😮
Great video man 👍👌 Try to put that motor on Skateboard or Longboard, make sure you Like so he can see it :)
Cool engine. Thumbs up! :)
BEEN WONDERING WHAT'S INSIDE THESE FOR A LONG TIME. THANKS FOR DOING THE VIDEO! (IGNORE THE NEGATIVE COMMENTS. OBVIOUSLY TOO DULL TO GET THE POINT OF THIS VIDEO).
The central shafts in the static housing were ground away. My guess is those two parts shot totaled the engine. It was not inspected regularly since it was so dirty inside and it was run with a bad bearing until it seized.
That "dirt" is mainly water corrosion, the engine has clearly been submerged at some point. besides that the main components of the engine with the exception of the bearings and possibly the main shaft were salvagable. if you look closely there were no signs of the turbine or compressor wheel having made contact with the housing or stator ring.
Engines and more ! This really pissed u off didn't it ? LOL love it when that happens !
Are you going to put that back together? Holy moly. I could never do that.
That’s the Kingtech service guy performing the 25 hour service. Great engine’s lifetime warranty. LMAO
That was fun to watch...and I didn't have to listen to someone talk. Thanks!
2nd viewer super
#proknow
Penonton Indonesia angkat tangan+like 🙋🙋
☝️
Hadir hhhhh
hadir guys..
diem lu homo norak
☝️
Awesome video
Nice job
I love this video thank you
If this is educational, would have been great if there were some words on the screen that tells you what all the parts are for, for us who don't know anything about jet engines
You could have just used a sledge hammer and taken it apart much quicker. Why bother wrecking it?
It sounded like it already had issues and was well used anyhow. Suppose he makes more than the value of fixing or replacing it from uploading this interesting video, what problem can you see with this?
They are worth like 20 grand each. Or maybe 10 grand.
@@Justwantahover lol nonsense
@@edism How much are they, are they cheaper?
@@Justwantahover Much cheaper, £1,500 - 2,500
Well done guy. Seeing is believing .Now clone each part to start your own RC jet engine production like Chinese .
Please make a small jet engine I like to see your creativity that you will do 😊
He didnt made the engine allryt
He's just exploring it
YES PLEASE MAKE ONE
No please
Only Rainman could put it back together again.
Very Good!
This video is very important for me because i often thought that the jet may start with help of dc motor
Wow it's cool
The sound and the inside is so cool...
interesting 👍
A really fine piece of machinery ! These turbines are beautifully made. I’m really surprised by the conception of the first compressor: it’s « full », like there’s no blades catching air from the center rod out to the side. The air seems to be caught and compressed only from the circumference of the stage. I’m sure these are highly calculated and optimized, but i’m curious as to why the first stage compressor doesn’t have blade getting air from the whole surface instead of just the edge.
BTW: I was talking about the compressor at 3:50 .
I think the reason it’s like that is because this turbine is more like a turbojet, and not a turbofan. It doesn’t use bypass air for thrust. Right ?
@@radicaltronic1855 that's Centrifugal Compressor similar to the ones used in car turbochargers, it's much simpler and safer design than Axial compressors used in modern real jet engines. Actually very first, pre WWII jet engines were using same system, British Meteor jet fighters were using engines of this type. Today all commercially available mass produced RC model jets are using CC engines, while there are Axial powered prototypes this things are insanely expensive and noone has figured out mass production of them yet.
Nice job man
Very cool thx very much have a greate day
I love your cheanl
Thank you so much
Now I have some information about it
Even I got some information about it😍😍😍
@@sunilshine8010 . Can you make jet engine?
@@QuizWave594 Yes I can.... But I don every materials ....
@@sunilshine8010 . Can you send your whatsApp number. I have pdf of jet engine . In this pdf compressor made from plywood and it's actually works.
@@sunilshine8010 . Bhai m bahut bar try kiya hu but kam hi ni karta please koi bna k dikha do kese banaye
Why is everyone uptight over this video? He took a broken jet engine apart & filmed it so we all could see what's inside.
This video would probably come in handy during reassembly (if any).
Some need to be outraged apparently. I don’t understand it personally.
WOW - bet that one will never run again!
Nothing was damaged but if it doesn’t ever get reassemble. True
Super video
Good job sir
Amazing construction, I would not want to be tasked the reassembly.
Why? Looks fun.
Nice to watch enjoyed seeing the motor being pulled apart . Good job 👍
VERY BEAUTIFUL👍👍💞
Good job destroying what looks to be a perfectly functioning engine.
It wasn't functional.. the main shaft was split in half and the ball bearings had fallen out of their sockets. My guess is that the bearings failed and sent those balls into the engine effectively destroying the engine. Breath a sigh of relief because I was there with you until I saw the whole thing.
@@ejkk9513 Not quite true, the bearings may have been destroyed but the turbine wheel and stator wheels including the turbine wheel housing were perfectly usable, a bit dirty - yes but salvagable meaning that it was not a catastrophic failure and could have been repaired relatively easily. I have done it myself with an older frank turbine engine.
@wind of change you don't sound like an axial turbine expert.
Its amazingbthese things can work while being this simple. A ge90 turbofan has like tens of thousands of individual parts. This swiwin only has 100 or 200.
Wow a miniature turbojet never saw that one coming
waw very good mini jet engine
Fantastic
Grips the impeller blade with pliers, and hits the shaft with a hammer. I died twice.
Jet Engines are SIMPLE compared to Piston Engines!
Amazing and cool
Super bro
so lovely 🙋🙋
i luv ur videos
That poor engine was toast don't blame ya !
thank you for this video . we hope you make more about model jet and rockets
bhai aap ki hi jarurat
thi mujhe thankyou bhai
i am from mexican
thank you
I am not sure why there are so many criticisms posted--I for one am glad you dissembled the jet because I have always wanted to see the inside of a jet cat. Thank you! Further, the jet clearly was not going to operate reliably given the wear shown and would have had to been rebuilt anyway. This was a very profitable video--nice job.
Awosome Fit this jet engine into your bicycle. Then you will become your private jet plane.😂😂😂😂👍👍👍
😂RIP GRAMMER
😂😂😂😂
The death of a perfectly fixable gas turbine.
i am 3rd like and coment fom india
wow no waay man
I had no idea that they used regular ball bearings, I was expecting fancy floating hydrodynamic bearings...
The races have ceramic balls to take the heat and are lubricated using oil in the fuel around 4%
That's one way to throw away $5,000.
First of all it is not $5,000
Second of all it was destroyed before he even got it.
Edwin-F-104 first of all, the most expensive JetCat turbine on the market today is $12,000. This one was around $4,200 so you're right.
Nice brow
Wow Jet turbines available online.
You have a creative idea
if you don't want that engine anymore, sent that to me please. 😍🤣
Gjb video
Missed the part where it was hacked to pieces by an abrasive wheel.
I can remember where a couple of the screws go!
u r really perfect
thank u
good hands buddy
大丈夫だからやっていると思うけどどんどん分解されていくのを見るとちゃんと完璧に組みたて直せるのかなと他人ごとながら思う。
I guess it was destroyed already? If not, I suppose it is now!
Super wonderful
Does that mean when the engine is running on fuel, the electric starter motor is being spun by the jet engine?
No, look carefully at the shaft when he tests it the second time. It retracts when there's no torque from the motor or when it's exceeded by the turbine's shaft.
that turbine has seen better days
Merci 🤗👍
that thing is toast XD
So the compressor is essentially an off the shelf turbocharger compressor wheel. Interesting. I always figured it was the same as a full size jet engine compressor stage, just shrunk down.
Nothing about these turbines is off the shelf
I think the way the machine was manufactured was a perfect example of bad design.
Looks to me like it not really was purposed to be serviced as evertything was welded and obstructed.
It was a bit painfully to watchh but still thank you for the clip :) I solved some riddles I had.
These engines are serviced every 25h. So not sure what are you talking about.
@@edwinator46 The design makes it hard to service the engine.
The original vid was in Vietnamese and he muted the sound to make this version. Watch it slowly and try to understand the engine with logic and it makes great sense that no other vid on the web does that.
amazing
Awesome
First like and view
Love your channel
Left hand pinkie fingernail explains the whole video..... wired out of his mind taking apart random stolen goods 💀
Bring it back together.............
Nice
Bro i really want to see the inside of this engine you are wonderful
$ 3k like smoke, just for fun. The condition of the engine wasn't so bad... What a shame ..
the condition actually was bad
What is the name of This Engine's Moter ??
I dont know you but I will sub just because of this video
OK CAN YOU PUT BACK TOGETHER
??? IM AMAZED HOW MANY PARTS , GOD BLESS YOU IOF YOU CAN MATE !!!!!