97-01 Honda CR-V B20 AWD Jackspania Header Unboxing and Install
ฝัง
- เผยแพร่เมื่อ 27 เม.ย. 2024
- In this episode, I install the Jackspania Racing Header and test pipe on my all wheel drive Honda CRV.
Jackspania Racing Header - jackspaniaracing.shop/product...
Save 10% with code HONDARESOURCE jackspaniaracing.shop/?ref=ho...
oxygen sensor socket - amzn.to/444DMT0 - ยานยนต์และพาหนะ
Fantastic video as always! I replaced my full muffler and catalytic converter but my headers are still the old rusty ones. This is perfect!
Hey bro all the way from Australia 👋 nice vid I just used your discount and ordered the same for my RD1. Keep up the great work!
Nice!
Well damn , I already paid $400 for the PLM header,,, should have held out for this!!!
Just subscribed man keep more content. I just got a 98 crv awd 5 speed
Hey man super awesome. That's a nice simple easy bolt on kit and thanks for the tip about coding the header and oil never knew that definitely we will be using that for now on. Hope all is well man take care
Glad to help
Can’t wait for the belt video I’m bout to do mine this Friday I can wait tho
I just installed mine yesterday.
Heck yeah
@@hondaresource does the Check engine light go away regarding the o2 sensors?
Yes
Definitely sounds more raspy Hahaha, I told you you will build a Turbo car again after your old all wheel drive hatch. I loved that car. Keep up the great work. Cheers 🍻
Maybe one day!
If you did an in depth motor mount replacement guide for all of the mounts especially the rear motor mount on the rd1 it’d get a ton of views there’s no good videos anywhere for them
Now question, will the o2 sensor spacer keep Check engine light from coming on? I did a cat delete on a V6 accord and the codes would clear unless droving really hard
New shop, crv
Hey man awesome video !! Can you make a video on how to change the 1st gen crv radio
I will next time I have to do one
Wow looks mint
Juate bought mine a week ago for 800$ its kinda rusty asf
Nice
6 days after video and they're sold out.
Yup 😂
Hello, my CR-V project is going on , sad that I cannot post pics, some day ago the car started to have a mysterious noise from under from half to back of the car, it seems like a electric motor noise or also very similar noise to a human blood pressure machine. It doesn't come always and it's only when the car is turned off. It happen also with disconnected battery. Have you never heard about it? Thanks for your time and thanks for your channel.
Michele
Did the car throw any constant O2 sensor codes? Or did the spacers bypass it
Can you do a video about setting idle speed and base timing for the V?
Hey Phillip, congrats on the new shop man. Anyhow, I've got this '98 Honda Civic LX 4 dr sedan with a D16Y7 engine which has serious rod knock. Can't seem to source any donor parts motors, although i do have a good crank that I've found. Want to keep as looowww buck/budget as possible....thanks for advice.👍
Just make sure you clean everything good and replace that rod too
Still back for the sensor codes, did the test pipe and sensor spacer combo avoid any high or low voltage codes from the o2
So far so good.
Could you please explain what is the difference between ECU 37820-P3F-A54 and 37820-P3F-L54? Thank you.
Awesome content headers are still sold out! but on another note, would you happen to have a parts list to convert crv 2000 front wheel drive to all wheel drive? I would like to keep it automatic
Question bro I gta gen 1 crv n new Zealand and wnt to put 17x8s what offset do I need ? Plus 25 or ?
Would it bolt up to the cat if you live in a smog state?
My crv gen 1 98 model automatic have problem in shifting into gear 1. I cant shift it to L1. Any suggestions sir?
Hey brother, any chance for a detailed launch and AWD test of the 2006-2011 diff in the 1st gen RD1?
I was actually trying to do that, I have video before, I'll check to see if I have after. I sold the green CRV about the time this video dropped. Someone came along that wanted it more than me
Hey CRV buddies, my rd1 late model (Dec 2000 build) the exhaust sounds kinda bubbly/loud from inside the cabin kinda like a small leak but not full blown. Is this normal for them or should I be checking it out?
I installed the Jackspania header on mine I didn’t like the rasp, ordered a cat from 1320. rasp gone sounds like stock.
Nice
Hi brother i hope you’re doing well. I have q question. What’s the solution for a pitted deck b20 engine ? I does have some cracks close to the cylinders but mostly on the water jacket part. It’s a crv and it have oil mixed with coolant and also throwing water it one spark plug hole. Any solution plz ?
Prob have it resurfaced
@@hondaresource hi Sir, thank you 🙏🏻 I was planning on replacing the engine. But the engine is working fine and have a lot of power. So i was more interested in solving the problem. Also don’t you think an epoxy block fill will work ?
Thank you sir for the coupon code. I have a technical question though. I recently did a manual swap on a 97 crv and used all the wiring from a 99 crv (engine harness and interior harness and wires). I came across the connectors on the fuel pump and it looks like the 99 has an extra connector leading to an evap system attached to the fuel tank. On the 97 the evap system is located under the hood. My question is can I leave the connector unplugged or do I have to swap the fuel tanks? I think I know the answer but was hoping that you may know a trick to bypass it since I still have the old system. Thanks again for that you do to help the community. 🙏
Best bet is to swap the tank.
@@hondaresource I had a feeling you were going to say that. Fml, just one thing after another. Why Honda lol. A friend of mine said it should be ok leaving it unplugged since the old system is still hooked up. I will run it first to see what happens and see if any codes pop up.
Hey mate i have a question about the gen 1 model crv. Can you swap the front and back seats, door trim and possibly dash fascia and surrounds with the later gen 2 interior?
Gen 2 interior just looks so much better, but I prefer the clean gen 1 look of the rear.
No.
@hondaresource ahh, you know what? The gen 1 interior has grown on me anyway after driving it for a few days
I like watching your videos. I have a 2001 crv, do you know anyone like you around the Eugene Oregon area? Wish I could find someone i could trust to get some work done.
I don't unfortunately
I have a 2001 CRV I bought new. It doesn’t have ABS brakes. Is it possible to convert regular brakes to ABS on the first gen CRV?
I wouldn't. There is a TON of wiring for the abs system.
@@hondaresource thanks for the advice, I’ll take it.
You think if the catalytic was put back on the rasp will be gone?
Most likely
I know this is off subject.
But... do you know if the 96/98 auto trans, interchanges with 99/01. 99 has overdrive on shifter button and 96/98 is on the selector. Please help... P.S. miss seeing you. But really baby come back. Need some more content.
No, they do not interchange. Shop had been crazy busy. Up to 5 employees now. I'll be back.
10:10 i would not be using the gasket you recommended. Especially for high compression engines. you'll blow those gaskets out right away. id be using the one that fell on the floor, or order a new one from Honda. Take it from someone who blew 5 out before realizing this mistake.
What does a high compression engine have to do with it. I agree that the metal gasket is best in most circumstances
@@hondaresource i cant remember the explanation i was given by the Lexus dealership mechanic in Edmonton. Someone correct me if I'm wrong, but i think its a higher exhaust pressure or just the rate of air flow. Those gaskets just end up popping. on my is300 i blew 5 of them before going straight to lexus for an explanation. i was given a aluminum crush gasket for my headers to Y pipe. when it comes to any gaskets, i now go straight to the dealer to avoid any headaches. many tims was i given this advice.
Sell you a 01 ex automatic 206k. $2000...lol
I'd probably take it if it was close to me
$ 329.00 to much for me.
Not many options when it comes to the AWD header