Jimmy Dali this is "corporate" Jay. He's doing a promo for a big corporation so it's natural that he would tone down his personality a bit. We shouldn't hold it against him or Nvidia
Agree 100% I have a new 2080 founder from them and reading they are being sent back for exchange or refund.All most done with my system fingers crossed.
The genuine acting of these guys make me feel comfortable and makes me feel like were all in the garage just kicking back with some beers and building/upgrading Jayz Computer.
well i read through the nvidia forums.. one guy was 3 weeks after launch like: i ordered 2 2080 tis.. one died a week ago.. the second one died 3 hours ago.. so yeah.. concerning rma quota..
Jay behaves much more properly on your channel than he does on his ;) I have loved watching Skunkworks being upgraded over the years, this latest upgrade is probably my favorite. Those water blocks look AMAZING!!! I hope to do that to a graphics card some day.
"You can have a amazing looking system like this without any special or formal training" Hue hue hue.......I can't even afford a rtx 2080ti let alone i bet that entire system is worth more than my second hand car. 😂😂😂
@@antonhelsgaun I mean i have no idea how much the waterblocks cost, but im sure thats the most expensive stuff. and depends what kind of second had cars ur talking about :P i can buy one for under 300 euros hehe jk jk
EDIT: the waterblocks for the 2080TIs are 133.18 euros each, the reservoirs are around 62 euros each and the rest, such as tubing and small stuff cant be very expensive, id say the water cooling for that stuff CANT be worth more then a second hand car. Lets say the cost of the water cooling is around 500 euros.
S33K3R™ two ek RTX 2080ti water blocks and back plates cost me $640 Canadian after duty and shipping. And my two 2080ti don’t come in till next week I’ve been waiting for them for 6 weeks now lol
good news is, warranty void if removed stickers are illegal according to ftc. so you can still rma it as long as you can put the factory cooler back together correctly.
I love how after a few dead 2080 Tis, everybody is making it sound like the 2080 Ti is bound to die. No, it's not. A friend of mine got his FE 2080Ti. 130 Mhz core OC, 1Ghz memory OC, it's still going strong.
@@epicgrapefruit7563 I would personally buy it now and put a waterblock on it. Also, the problem has already been found. The vram chips aren't properly tested. A guy on reddit underclocked his vram by 50 mhz and his artifacts went away.
Woah!! Nvidia was already a top notch in showing pc builds ...But now Nvidia just started pulling out the bigwigs of TH-cam. Totally a fan of you guys.
Having watched way too many LinusTechTips videos, it's actually refreshing to see delicate hardware being handled properly, professionally, and with the utmost care. Linus's carelessness becomes really old really fast.
@surfingsuicune Because I wanted two high-end GPUs for my new build. And 2080Ti's are just that. This is a fact, whether you're on the hype or the hate train. Were they worth over 1200€ a piece? I don't think so, but I don't care either. Gonna have my Acer Predator X34P soon, so I can really take advantage of the cards. Currently on an ancient 24" Dell monitor.
He didn't tell people to "not buy" the cards exactly.... He said don't pre-order so you can wait and see what they do, and he said that the price to performance was not quite there. They are definitely the best card out there, but you don't need the best card to run 1440 at 60+ FPS.
@@q-breezy4826 Which is right, don't pre-order! You're just throwing your money at companies for nothing, based on hype and hollow promises. And then cry and complain afterwards.
You're *much* better off selling sections of your liver! Your liver re-grows if its harvested properly, you only get two kidneys and they don't grow back if you take a whole one out! Seriously though, those RTX prices are *BS*
Look. I don't know anything about building a "computer" (my degree was in architecture), but I could easily follow exactly what JayzTwoCents did! Even reading your comments below here, I could pick up a few pointers. I could do that. Now, whatever else I needed to build the computer I wouldn't have a clue, but I'm going to go to a local computer store in town and have them build one for me. Now, I don't know what the NVIDIA cards do for gaming, but I sure do know what they'll do for graphics! And "Ray Tracing" is a huge step in the right direction as far as that goes!
Have a block and backplate on mine and is excellent. Under 45c at 2115mhz solid. Have ran my card for some weeks now with many hours of heavy usage. So far has been excellent without issue. I also find it far easier to remove the blue plastic first then peel the thermal pad off the thicker clear plastic and apply. Rather than try peel it off in place.
Hai don't mind me. I'm just here to watch Jay. But seriously. He's the guy I go to when I have any troubles computer related and was the guy I chose to have his basic PC build video up on my phone and consulted that when i was building my system over a year ago. The main things I like about Jay's videos and what makes his videos my favorite is he gives all the informations all, no bullshit, and manages to sprinkle in some humor that doesn't completely suck or seems too over the top for the sole purpose to get views. Jay is just awesome.
It's done already has been for a while. See this post from Jay on why he hasn't gotten it to Post Malone twitter.com/JayzTwoCents/status/1044972042246737920?s=19
This is also a great tutorial for maintaining cleanliness of the RTX GPU... If I ever own one. I'll make sure to take good care of it... I wish I can own one....
I have a question... the gpu block has two little plugs or caps on the back where compression fittings would go... do you need to purchase these separately or do they come with the block?
Am I not correct in understanding that you do not need those washers on the backplate ? The backplate is anodized aluminum and will not short the pcb unless bare metal is exposed from the anodizing being scratched off. Spacing up the backplate is going to remove the mounting pressure contact with the thermal pads.
Couple of questions. Is this quieter, because when I have everything maxed out on some games, my 2080ti is a noisy fella, a nice safe 81* but the fan noise does my head in. Also, is it as effective as a fan, did you test/compare results? Thanks.
Hello JayZ. I see EK waterblocks require "founders" Edition PCB's. Is that the same as Reference Model? A lot of other similar solutions require 2080 Ti REFERENCE PCB not founders. Wondering if it is the same thing. Also curious as to how good soft tubing and hard tubing is with regards to potential leaks?. The EK waterblocks seem to have holes going through. Can you use angled fittings like 90 degree joint fittings one say only one side or does it have to go in on one side and out on the other?
![เปิดใจ "อาจารย์เบียร์ คนตื่นธรรม" อดีตเคยสุดทุกทาง ถ้าใช้หนี้หมดไปบวชแน่ l [Nickynachat]](http://i.ytimg.com/vi/IxeE0xVhy08/mqdefault.jpg)
He's trying so hard to not make any bad joke :D...... this is not the normal Jayztwocents ... too strictly tho
Yess, for the first time he looks nervous. xD
hahaha... I was like: and when comes the "that's what she said" joke?
No digression? Wtf Nvidia, let the man digress!
:)
Jayztwocents is the king of bad jokes.
*Nvidia is behind the camera pointing a gun at JayzTwoCent*
Pointing his wallet you mean -.-
Well, the gun is ray traced, so worth it.
They do sponsor him a lot.. #jayisadickhole
@@lonewolf031 Well, Jay does high-end and nVidia today is the only one who provides.
😂
Poor guy is fighting so hard to be serious lmao
He's about to blow up any minute....
LOL I AGREE HE DOESNT HAVE AS MUCH PERSONA AS HE DID ON HIS VIDS
I was just about to comment saying WOW is this really Jay??
Jay going full control on his joke for this collab
He probably has a burnout, imagine all the stress he endured making this video. We should start a crowd funding to get him back on his feet again.
Imagine them collaborating with Linus tech tips
*hands him the rtx 2080ti*
Linus: *drops it* OOOPS
LOL
I came here after seeing jayztwocent in the thumbnail!
same
same here
x3
You know he would say that's what she said
moi aussi /me to
This is not the real Jay. This is a JayzTwoCents android.
Jimmy Dali this is "corporate" Jay. He's doing a promo for a big corporation so it's natural that he would tone down his personality a bit. We shouldn't hold it against him or Nvidia
I prefer this android version better
I just wonder how many takes it took for him to read that script for an 11minute video...
thanks for the laugh
@@LS-jk3fk Cheers buddy
Nvidia voids the warranty themselves
kingsofserbiangameplay 162 they want you to void the warranty so they won’t have to replace the RTX after it dies. And they die a lot lately ...
@@raw_pc, I can take that too
right to repair should fix this issue. fuk the void if removed stickers.
Agree 100% I have a new 2080 founder from them and reading they are being sent back for exchange or refund.All most done with my system fingers crossed.
new laws :)
I don't know why, but watching people build water cooled builds, especially when they pour the fluid, it's just so satisfying. Great job Jay!
It's so fun watching JayzTwoCents trying his best to hold back his usual way of speaking 😂😂😂
The genuine acting of these guys make me feel comfortable and makes me feel like were all in the garage just kicking back with some beers and building/upgrading Jayz Computer.
Just remember when buying the 2080ti to buy an extra one or two 2080ti's for when it breaks down you can continue to game without waiting on an RMA
😂
The more you buy, the more you save... i guess they meant time.
I have 2 2080s NVLinked (non Ti). Hopefully this is only a Ti issue.
well i read through the nvidia forums.. one guy was 3 weeks after launch like: i ordered 2 2080 tis.. one died a week ago.. the second one died 3 hours ago.. so yeah.. concerning rma quota..
@@Dunkelelf3 FE or AiB cards?
Costs more than all hardware I've ever had. Looks superb, tho
Nero1024 wait were are they cause they got shelves filled with pc parts
JustKevon at jays studio
Collaborate with Linus - just make sure the RTX card has a wrist mounted tether so he doesn't drop it.
Collaborate with Verge - just make sure... wait... stop... what are you doing?
I lol'd
Siiiiigh... Poor Linus... Always dropping things Lulz
Man that comp looked awesome and I def loved the contrast with the cords he was talking about
"Watercooling Expert JayzTwoCents"
Me: *Plays clip of Jay drilling through a motherboard
Haha no hate, love jay's videos.
Jay is a good guy, he contributes a ton to the PC gaming scene.
"Its a little big and over the top, kind of like me" - JayzTwoCents
he does all the complicated work with uncanny subtlety...and the results are beautiful
We love JayzTwoCents.
SkunkWorks is by far my favorite PC on youtube its also my favorite color that green is so awesome. Nice job Jay!
If you mod it before it bricks you can't send it back 😉 clever NVIDIA! 🤔
Or you can just put the original fan/heatsink back on. There are no void if removed stickers...
not to mention those stickers are bullshit says the supreme court
The background looks so much nicer with the blinds up! Jay should use that in his videos more often.
Jay behaves much more properly on your channel than he does on his ;) I have loved watching Skunkworks being upgraded over the years, this latest upgrade is probably my favorite. Those water blocks look AMAZING!!! I hope to do that to a graphics card some day.
skunkworks is no more, he trashed the case.
This was a REALLY good guide and I loved it. It's good to see him "serious" for once. Straight forward, good work.
"You can have a amazing looking system like this without any special or formal training"
Hue hue hue.......I can't even afford a rtx 2080ti let alone i bet that entire system is worth more than my second hand car. 😂😂😂
Well yeah but i think he was reffereing to the water cooling part :P
@@S33k3R7 The water cooling part is probably also more expensive than a lot of second hand cars tbh
@@antonhelsgaun I mean i have no idea how much the waterblocks cost, but im sure thats the most expensive stuff. and depends what kind of second had cars ur talking about :P i can buy one for under 300 euros hehe jk jk
EDIT: the waterblocks for the 2080TIs are 133.18 euros each, the reservoirs are around 62 euros each and the rest, such as tubing and small stuff cant be very expensive, id say the water cooling for that stuff CANT be worth more then a second hand car. Lets say the cost of the water cooling is around 500 euros.
S33K3R™ two ek RTX 2080ti water blocks and back plates cost me $640 Canadian after duty and shipping. And my two 2080ti don’t come in till next week I’ve been waiting for them for 6 weeks now lol
the piping looks fantastic, super cool color scheme
*And for when a Beercooling RTX?*
_Life is based on sharing the things that we like the most..._
I've got to say, Jay all serious is a bit of a change. I quite like it, but I love the banter from his regular videos as well. Well done ol' chap!
Jayz on the big time! Made it to GeForce Garage!
The Watercooler is looking just awesome.
I see Jay. I see the like button.
I see button. I Jay the like see.
Nice new tutorial addition. Looking forward to more of these for the future in this channel.
Love Jay ❤️
I've got the Vector blocks on my 9900k and RTX2080, new build looks stunning.
was hoping to see a benchmark too!
Been watching this series since it first started. Really nice
Top ten anime crossovers
Top ten people who sold a kidney to buy a 2080ti
Top ten anime warranty deaths
@HimKioo Lol i dunno i noticed this just now
Brazil is here and waiting for you RTX (good luck for all of us)
Yes, void your warranty so you can't RMA it when it dies an a few days! No wonder it's on Nvidia's channel.
good news is, warranty void if removed stickers are illegal according to ftc. so you can still rma it as long as you can put the factory cooler back together correctly.
I love how after a few dead 2080 Tis, everybody is making it sound like the 2080 Ti is bound to die. No, it's not. A friend of mine got his FE 2080Ti. 130 Mhz core OC, 1Ghz memory OC, it's still going strong.
@@FOGoticus it's been 2 months since they released... Give it time
So true! And so stupid to watercool a broken from factory card.
@@epicgrapefruit7563 I would personally buy it now and put a waterblock on it. Also, the problem has already been found. The vram chips aren't properly tested. A guy on reddit underclocked his vram by 50 mhz and his artifacts went away.
It's great to see how far cooling systems have expanded
Woah!! Nvidia was already a top notch in showing pc builds ...But now Nvidia just started pulling out the bigwigs of TH-cam. Totally a fan of you guys.
the way you sound, they could take a dump on you and you'd still be a fan, wait, they did with rtx pricing, never mind...
I mean... it was only logical for them to get Jay there after all the Nvidia shilling he has done over the years.
These builds are getting more and more epic.
They must of paid him good cause there was not one lame joke or he a clone lol
He got two free 2080 Ti's... I could watch my mouth for 20 minutes for that.. lol
*have
Having watched way too many LinusTechTips videos, it's actually refreshing to see delicate hardware being handled properly, professionally, and with the utmost care. Linus's carelessness becomes really old really fast.
I see Jay, I give a Thumbs Up!
What a beast of a system! The UV lights do look great.
How awkward after telling people not to buy their cards... lolz
People will buy them regardless. I did!
@surfingsuicune Because I wanted two high-end GPUs for my new build. And 2080Ti's are just that. This is a fact, whether you're on the hype or the hate train. Were they worth over 1200€ a piece? I don't think so, but I don't care either. Gonna have my Acer Predator X34P soon, so I can really take advantage of the cards. Currently on an ancient 24" Dell monitor.
He didn't tell people to "not buy" the cards exactly.... He said don't pre-order so you can wait and see what they do, and he said that the price to performance was not quite there. They are definitely the best card out there, but you don't need the best card to run 1440 at 60+ FPS.
@@q-breezy4826 Which is right, don't pre-order! You're just throwing your money at companies for nothing, based on hype and hollow promises. And then cry and complain afterwards.
@@sirius4k I didn't pre-order, I just regular ordered, and I love it!
Extra episoide of JayzTwoCents this week, cool!
Another kidney........
for what? stick with air (ideally noctua). Save that kidney , or sell it for gear that will actually make a difference.
You're *much* better off selling sections of your liver! Your liver re-grows if its harvested properly, you only get two kidneys and they don't grow back if you take a whole one out! Seriously though, those RTX prices are *BS*
That’s why my next graphics card is gonna be a radeon
Look. I don't know anything about building a "computer" (my degree was in architecture), but I could easily follow exactly what JayzTwoCents did! Even reading your comments below here, I could pick up a few pointers. I could do that. Now, whatever else I needed to build the computer I wouldn't have a clue, but I'm going to go to a local computer store in town and have them build one for me. Now, I don't know what the NVIDIA cards do for gaming, but I sure do know what they'll do for graphics! And "Ray Tracing" is a huge step in the right direction as far as that goes!
Man where's the video on jay's channel?
this is the video, Jay just come for RTX cards :)
Have a block and backplate on mine and is excellent. Under 45c at 2115mhz solid. Have ran my card for some weeks now with many hours of heavy usage. So far has been excellent without issue.
I also find it far easier to remove the blue plastic first then peel the thermal pad off the thicker clear plastic and apply. Rather than try peel it off in place.
8:07 that’s what she said
there is no but Jayz you just make it cooler and cooler
All I use water for is drinking and bathing
That colour really looks awesome
Nice builds guys, throw some good stuff on me please ;)
Hai don't mind me. I'm just here to watch Jay.
But seriously. He's the guy I go to when I have any troubles computer related and was the guy I chose to have his basic PC build video up on my phone and consulted that when i was building my system over a year ago. The main things I like about Jay's videos and what makes his videos my favorite is he gives all the informations all, no bullshit, and manages to sprinkle in some humor that doesn't completely suck or seems too over the top for the sole purpose to get views. Jay is just awesome.
Colab with linus to do some crazy ass project or just throw him a gpu...ya know cause linus doesn't drop stuff
I love Linus tho... Such a troll 😂
@@halilhammer7607 haha so do I but gotta be fun with it
It'd be the pinnacle of circlejerking.
The color grading on this edit looks amazing
The Post Malone PC has taken so long to build it's already outdated...
It's done already has been for a while. See this post from Jay on why he hasn't gotten it to Post Malone twitter.com/JayzTwoCents/status/1044972042246737920?s=19
It looks so fun to build pc's and mod parts. One day I want a workplace like Jays
Where’s my ray tracing
Please hold out arms to receive Ray Tracing.
*placing virtual copy of BF 5 in your hands*
The ray tracing was a lie
@@deathwatch27 That's factually incorrect.
@@UpsideDownCanoe look up a little game called Portal to get the joke 😉
Looks awesome, good job Jay!
Jay sold out.
The least he can do considering all the views Nvidia got him.
''water cooling expert'' wow jay you made it, You are a professional :D.
AMD is better
Jay is my favorite TH-cam content provider. Nvidia is my favorite GPU inventor! LOL It's great to see this collaboration.
This Pc is the coolest I have seen in my life
I want CASELABS to come back ! Nice build Jay.
This is also a great tutorial for maintaining cleanliness of the RTX GPU...
If I ever own one. I'll make sure to take good care of it...
I wish I can own one....
the cameraman did a good job, and he speaks right
Wow, water cooling gaming system. Damn, epicly swag as always.
Man....that is so cool...I didn't even know that you could do watercooling with an RTX 2080 Ti....!! This system of yours totally rocks!! :-)
Cool to see what an rtx card looks on the inside
that cabinets were so cool dude
Skunkworks is back and ready for action. LoL Jayz nervous as hell
HYPE For @JayzTwoCents !!!
I have a question... the gpu block has two little plugs or caps on the back where compression fittings would go... do you need to purchase these separately or do they come with the block?
Peak engineering and performance
Good video, the colour was more vibrant than a normal jayztwocents video but it also lacked the usual humor which we all know and love. 8/10
Am I not correct in understanding that you do not need those washers on the backplate ? The backplate is anodized aluminum and will not short the pcb unless bare metal is exposed from the anodizing being scratched off. Spacing up the backplate is going to remove the mounting pressure contact with the thermal pads.
The feeling of having and taking ones of those new RTX out of the box, I wonder how that feels. nice video guys.
Jay's performance is throttling in this video
This hardware looks superb
Couple of questions. Is this quieter, because when I have everything maxed out on some games, my 2080ti is a noisy fella, a nice safe 81* but the fan noise does my head in. Also, is it as effective as a fan, did you test/compare results? Thanks.
Two legends colliding
NEVER had a Built PC in MY LIFE :( and im 25 now . Always watching ur videos
Specs@its best
Gotta love a bit of Jay
I love the Finish Product!
love jay been watching him for years and years
Excellent guide Jay!!
Hello JayZ. I see EK waterblocks require "founders" Edition PCB's. Is that the same as Reference Model? A lot of other similar solutions require 2080 Ti REFERENCE PCB not founders. Wondering if it is the same thing. Also curious as to how good soft tubing and hard tubing is with regards to potential leaks?.
The EK waterblocks seem to have holes going through. Can you use angled fittings like 90 degree joint fittings one say only one side or does it have to go in on one side and out on the other?
it looks like pure craziness just seeing all this happen, and this is the norm!
he is a legend of watercooling ! thats for sure
Beautiful, functional tech.
This will always be the best Skunkworks has ever looked. Unless Jay has future plans for that case. 😮
Does it have to be watercooled if ur playing like 6hours of strasight gaming or will the fans be enough to cool it ? Can someone help me pls??
Every PC cell in my body started shaking when they recommended that GIANT freakin cake icing as thermal application.