@@sergmartin8681 It’s going to most likely vary from shop to shop, and also depending on the exact setup the bike is getting lets say, weather your using the stock headers and just adding slip on mufflers or adding an aftermarket header or a two into one etc. But speaking for us I believe this particular setup was roughly a 6-7hr job all said and done including the tune. Again that will vary.
I have a question hope you can answer I did a cam chest upgrade and also replaced the cam gear which fits tighter no play in the chain would this have any effect on running sounds good but idle erratic also had it dynotune
@RyandKyHarleyGuys from the review I got about the gear it takes away the 2-3 degrees of timing which I assume was to be safe now this is not a race bike hardly get above 3k and 65 mph, would the 583c cam be the problem? The decel sounds like someone beating drums
How many labor hours will a shop charge for this ?
@@sergmartin8681 It’s going to most likely vary from shop to shop, and also depending on the exact setup the bike is getting lets say, weather your using the stock headers and just adding slip on mufflers or adding an aftermarket header or a two into one etc. But speaking for us I believe this particular setup was roughly a 6-7hr job all said and done including the tune. Again that will vary.
I have a question hope you can answer I did a cam chest upgrade and also replaced the cam gear which fits tighter no play in the chain would this have any effect on running sounds good but idle erratic also had it dynotune
Shouldn’t have an effect on running. Do you mean it sounds louder?
@RyandKyHarleyGuys from the review I got about the gear it takes away the 2-3 degrees of timing which I assume was to be safe now this is not a race bike hardly get above 3k and 65 mph, would the 583c cam be the problem? The decel sounds like someone beating drums