Elise 2.0 Duratec dyno - 230Ps + 240 nm - very happy :)
ฝัง
- เผยแพร่เมื่อ 2 ต.ค. 2024
- Very happy with outcome of almost a standard 2.0 Duratec
Piper fast road cams 288 H
Light porting
Upgraded Springs for valves
APB Bolts, updated main bearings, manual tensioner
Balanced and carefully tuned ITB
Balanced injectors
Komo-tech mainfold exhaust ( well balanced )
Rpm max 7300
Gives me some hope I can squeeze a bit more power from my Ford Focus which has the Duratec 2.0 engine. ⚠️😊😁
2 L duratec great engine but you're going to be looking at a lot of money if you're not going with a boosted application and even then you're probably looking at about 10 grand just to Turbo it if you're not looking for a big bump in horsepower you can do a Ford Fusion 2.5 swap for not a lot of money it's a very easy swap that's what I'm doing on my 07 Focus right now and it takes it from 135 horsepower crank to 175 crank and you can pick up a 25 duratec for dirt cheap a junkyard I picked it up for $400 Canadian I think that's something like 150 $200 USD
@@kartaku132 Yeah I appreciate you have to spend significant money to get any substantial power increase from a NA duratec!
I was thinking more subtle increases using standard Ford parts found on other similar models?
As far as I'm aware the 2.0 duratec formed the basis of the Fiesta ST?
I was thinking more like intake manifold, exhaust mods, EGR delete, swirl flap delete, maybe readily available parts that just tweak the power, to give subtle gains of like 20-25 bhp?
@@pdtech4524 well if you're only looking for 25ish horsepower your best bet would be intake exhaust and a tune in roughly be about $1500USD for everything before shipping but that's not bad but if you're not interested in that there's another option I don't know what goes into doing this and I don't know how much it cost but you can take the 2.3 duratec head off of 4-cylinder Ranger and put it on your tools and it will make more power because the 2.3 has bigger ports and s*** it flows more air than the 2 L and I believe it's an 05 and up Ranger that Has them
@@kartaku132 Ok I'm in the UK so limited what other duratec engined models are around but I'll keep that in mind and have a look around.
Appreciate the info. 👍
Al motor! Yess
This man right here built my dream Lotus
How much would it cost to add more hp and MN on Mazda 2.0 LF engine? For the streets drive only.
I'm from Copenhagen btw 😁
Leaving standard parts - mega cost, this hp/torqu range is ok with standard parts and updated cams. Next step will require rods, pistons etc...
From model is this engine from ford st 150 or 170 ?
It's stock 2.0 duratec with updated camshafts and some updated Internal bolts.
How much power does this make
Hej! Hur har det gått? Har du varit ute med bilen än? Har själve en s2a som ska få en duratec...
Hej - jodå kört några initial tester, rullat på gatan och kört en track-day på Kinnekulle. Mycket nöjd :) Jag har framförallt olje-kyl som skall in ( går upp för hög när plågas på höga varv ) + göra om luftburken...
Hör av dig om du vill se installationen ( finns i Göteborg )
Kul, blev säkert en jäkla skillnad mot rover spisen, kan jag tänka. Absolut! Det skall/vill jag göra!
Used omex? Ecumaster??
Emerald K3
45 o 50 mm itb ?
45