Form 2003 till 2010 I owned this C5 2.2 HDI model, then changed to the actual 1,6 THP automatic. Till now i did'nt have any problem with the hydaulic suspension, in my opinion this is the best suspension by far in the market sorry Citroen will kill it :-(
Thankfully on the newer C5 X7 there is no removing the bumper etc. The pump also holds a little bit of pressure, even when the system is drained. When you undo the high pressure lines it squirts out. Plus, when all the system is back together you do have to prime the system before raising the car. Great video all the same.
Good video Point to mention here is someone has increased the fuse rating and blown the ecu board then it will work but no manual control will work until the ecu is programmed to the car
Nice tuto thanks. Went good for me with a lot more oil. Do you know if there is something special to do when remounting everything? Some kind of re-pressurize steps before reconnecting battery? Or everything goes by itself (air out of the system ...)? Thanks
my hydraulic fluid loss on my Citroen C6 2007 2.2 diesel . was down to a damaged tank ( almost invisible depression and split .. 30 lb air pressure in a water tank was the only way to locate the leak . and a faulty 1/2 molded small bore rubber pipe pipe .
My c5 (x7c had pump failure after a blown hose on rear. I had a spare pump from my mk1 swooped the ecu control box over with no issues but there is a small difference in the pumps the mk1 pump has an external fluid return where the (x7) has it internally. Chasing the pipework about I found a return line behind the engine coolant tank and cut in to it putting a tee connector in it and run the return from the pump to it. It’s worked fine for the last 4yrs with no issues but you must ensure to use some good pipe clamps. So for anyone who’s had a pump issue there is a fix so you can use older style pumps on a more modern car if you can’t find a pump.
selling my C6.. my son was driving it back to the UK importing taxes in Portugal make UK imports insanely costly .. the L/H shock absorber lost / leaked the LDS fluid and the front suspension went to low . after adding more LDS fluid the ride height returned enough to drive it back to the UK . Not having much luck with my ex dream car.
Hi I have a Citroen C5 2001 my fuse A40 blows. Lower down and up, then the A40 breaks 🤔 Adding a new one comes up. Using A50 now. Can the sensor cause fuse A40 to break ?? The car down to 0, fuse goes up 🤨 Why??? Don't want to change the pump. Could it be other problems??
I own a C6 in Canada. When I used to approach the car, I could hear an electric motor start and the suspension would come up and the car was ready to drive as soon as I got in and the engine started. The car does not rise now and I don't hear the motor when I approach the car. What should I look at first? And what procedure should I follow to get the car up again? If there's a cost, please let me know. Yours very truly.
Hi,many thanks about this great video, I want to know if it need adaptation with scantool ,i mean if we replace the pump its worked normally or it need a new configuration and enter the serial number with diagbox. best regards
Автор, не показал две главные вещи. 1. Надо сбросить давление, перед тем как выкручивать металлические трубки, иначе все забрызгает LDS .2. Пока не создашь давление в бочке, компрессором, после того когда жалеешь LDS подвеска работать не будет. Насос не сможет сам закачать и создать давление.
40 amp fuses in were the fuses and electrics are on the right-hand side as looking into the engine bay about 5 inches down in the box closest to the front there is a row of 5 or 6 very large fuses much bigger than normal ,are located try there that's where I found my problem refit a fuse up the suspension came sorted
Hola! ¿Se puede cambiar la bomba de suspensión vaciando el circuito hidráulico desde el depósito? De esa manera no sería necesario subir el coche en un elevador..... ¿Se puede? ----------------------------------- Hello! Can the suspension pump be changed by emptying the hydraulic circuit from the tank? That way it would not be necessary to climb the car in an elevator ..... It can?
Hey Buddy, I have a little problem with my C5 2002, H3 system, it's not as soft as it should be when crossing over small sharp holes on the road, and places where the road is healed by the holes, and it makes some noise when crossing over these, esspecially rear right side... I changed almost everything, rear arm bearings, sillent bloks, new IFHS comfort spheres and still same... I was told at forums from several people that depressurizing system could help, because I changed spheres... any idea..??
I’m having some issues with my 2001 c5, there is a humming noise on steering and the suspension raises very slowly from low. Also if a heavy passenger gets in the rear, the rear will not rise to normal ride height. I am thinking the pump is weak and is about to fail. Does this sound correct to you? If so, can get the pump refurbished or is it best to replace with new? Cheers mate
Level is good and no issues with oil mixing. What’s the story on new pumps? How much are they or can old ones be fixed? The motor seems to be running ok on the pump so maybe there are orings or something failing in these?
Hey citroman, soy de Lima, Perú gracias por el video. Tengo un c5 hay 2 cables del motor hidráulico que se han quemado y ahora el auto no sube 😭 estoy buscando ayuda 😭
Tengo un zx y aprecio su comodidad, mas un modelo hidroneumåtico siempre me ha intrigado y atraído (el xantia) pero al ver tanta complicación me lo pienso dos veces.
sorry to be so offtopic but does someone know of a method to get back into an Instagram account? I stupidly lost my login password. I appreciate any assistance you can offer me!
@Billy Dariel I really appreciate your reply. I got to the site thru google and Im trying it out atm. Takes a while so I will get back to you later when my account password hopefully is recovered.
El módulo electrónico que controla los solenoides necesita programación. Si la bomba es recuperada de otro vehículo no va ha funcionar salvo que intercambies los módulos electrónicos de control o sepas como programar el módulo.
Hola, tengo un c5 y le cambié el módulo de suspención. Pero no me reconoce lo chequé con lexia3. Por favor me puedes informar cuál es el procedimiento para programar el módulo? De antemano gracias por la información.
Hallo, ich habe derzeit das gleiche Problem, allerdings ist mir die Sicherung nicht durchgebrannt, kann meine Pumpe auch direkt durchbrennen, vielen Dank im Voraus Citroen C5 2.2 HDI 2008
Hola una consulta: yo tuve q cambiar la bomba hidráulica y se m fue todo el líquido LDS. Necesito purgar el sistema cuando tenga que agregar ese líquido con la.bomba nueva ?
No se purga solo lo bajas completo y le hechas liquido lo volves a subir así hasta q el liquido del tarro qede x la medida q necesita tmb move el volante para los costados para así circular bien el liquido
Hola mi c5 se baja solo de trompa que puede ser?? Levanta bien pero cuando paro en un semaforo se baja solo y aveces cuando voy circulando tambien se baja
hello, i have a 2001 c5 that display ''serious suspension fault''' and when i press up or down button it show a big x on the screen, do you have any ideeas? thank you!
@@CitroMan if i change hydraulic pump(i have one from another c5, same year, engine body type) do i need to make some setings in car computer or the car computer will recognize and accept the new pump with out me doing any setings?
Form 2003 till 2010 I owned this C5 2.2 HDI model, then changed to the actual 1,6 THP automatic. Till now i did'nt have any problem with the hydaulic suspension, in my opinion this is the best suspension by far in the market sorry Citroen will kill it :-(
Lucky man ,I m already in th e 3 pump ): 2009 2.0 exclusive
Thankfully on the newer C5 X7 there is no removing the bumper etc. The pump also holds a little bit of pressure, even when the system is drained. When you undo the high pressure lines it squirts out.
Plus, when all the system is back together you do have to prime the system before raising the car.
Great video all the same.
Hi, I wonder how to prime the system after the repair?
@@jonassebeckis1175 I adapted a spare filler cap onto a bike pump.
@@jamsams how many bars u putting in?
@@Suseko44 0.5b 😉
Que pasa si no cebas o purgas el sistema ? No arranca la bomba ?
Good video
Point to mention here is someone has increased the fuse rating and blown the ecu board then it will work but no manual control will work until the ecu is programmed to the car
Thanks for sharing how to make that work. Great job 👍👍
Nice tuto thanks. Went good for me with a lot more oil. Do you know if there is something special to do when remounting everything? Some kind of re-pressurize steps before reconnecting battery? Or everything goes by itself (air out of the system ...)? Thanks
my hydraulic fluid loss on my Citroen C6 2007 2.2 diesel . was down to a damaged tank ( almost invisible depression and split .. 30 lb air pressure in a water tank was the only way to locate the leak . and a faulty 1/2 molded small bore rubber pipe pipe .
Congratulations on the video, it is very useful! One question, is it necessary to bleed the suspension circuit after changing the pump?
My c5 (x7c had pump failure after a blown hose on rear. I had a spare pump from my mk1 swooped the ecu control box over with no issues but there is a small difference in the pumps the mk1 pump has an external fluid return where the (x7) has it internally. Chasing the pipework about I found a return line behind the engine coolant tank and cut in to it putting a tee connector in it and run the return from the pump to it. It’s worked fine for the last 4yrs with no issues but you must ensure to use some good pipe clamps. So for anyone who’s had a pump issue there is a fix so you can use older style pumps on a more modern car if you can’t find a pump.
Good hand skills............more C5 vids please.
.
Que bien trabaja este señor buen mecánico sí señor
Приятно смотреть когда профи работает!!! Мне Макса напомнил ,вместе на сто работали.
Спасибо :)
@@CitroMan добрый вечер , подскажите , а житкость с трубок как слить , боюсь смешал разные житкости и подвеска упала
@@АндрейБазылев-щ9т а что залили? LDS от TOTAL вся одинаковая должна быть
Buen video se nota el profecionalismo de alguien que sabe de citroen lo felicito
Красава Мужик!!! Спец-Дока!!! Бодрящий Лайк и Подпись!!!
selling my C6.. my son was driving it back to the UK importing taxes in Portugal make UK imports insanely costly .. the L/H shock absorber lost / leaked the LDS fluid and the front suspension went to low . after adding more LDS fluid the ride height returned enough to drive it back to the UK . Not having much luck with my ex dream car.
très ressemblant avec la C6 , je vais m'en inspirer pour mes prochaines interventions
Большое спасибо! Удачи Вам!
Please wear gloves! Glad you cleaned the area aound the pump and it's a pity the engineers didn't find a more accessible place for the pump.
Hi I have a Citroen C5 2001 my fuse A40 blows. Lower down and up, then the A40 breaks 🤔 Adding a new one comes up. Using A50 now. Can the sensor cause fuse A40 to break ?? The car down to 0, fuse goes up 🤨 Why??? Don't want to change the pump. Could it be other problems??
Hola gracias por los videos saludos desde Tenerife.
Пока что не понял, вы новый насос прописывали лексией или отремонтировали старый?
Muchas gracias por el vídeo yo le e puesto y no izó falta codificarla como me dijo el supuesto mecánico
Hey CitroMan, thanks for the video. Please, can you make a video of how to change the fluid in an AM6 automatic gearbox?
Thanks for your help
I own a C6 in Canada. When I used to approach the car, I could hear an electric motor start and the suspension would come up and the car was ready to drive as soon as I got in and the engine started. The car does not rise now and I don't hear the motor when I approach the car. What should I look at first? And what procedure should I follow to get the car up again? If there's a cost, please let me know. Yours very truly.
First, check if the fuse is ok
Hi,many thanks about this great video, I want to know if it need adaptation with scantool ,i mean if we replace the pump its worked normally or it need a new configuration and enter the serial number with diagbox. best regards
Incroyable vous êtes des robots👍
Нужно было показать еще что модуль обязательно со старого перекидывать
Thanks 👍 does this also apply to 2005-2008 model years?
Автор, не показал две главные вещи. 1. Надо сбросить давление, перед тем как выкручивать металлические трубки, иначе все забрызгает LDS .2. Пока не создашь давление в бочке, компрессором, после того когда жалеешь LDS подвеска работать не будет. Насос не сможет сам закачать и создать давление.
Для ситроена второго поколения 2005 года видео актуальное?
Cuantos bares de presion hay que darle ? Sino no arranca la bomba ??
It is useful even now, thanks
If you add too much oil, what happens? My fuse A40 breaks. The car down when it should come up goes A40.. Is it a pump or other problems?
Great job
There is no need to bleed the system? thanks
Thanks CitroMan, good job.
You're welcome
Great video my pump still isn't working it tests fine on the bench but doesn't work when installed all fuses have been checked....any ideas
40 amp fuses in were the fuses and electrics are on the right-hand side as looking into the engine bay about 5 inches down in the box closest to the front there is a row of 5 or 6 very large fuses much bigger than normal ,are located try there that's where I found my problem refit a fuse up the suspension came sorted
If you look at this video at 12 minutes, he is putting the lid back on the box in there just to the front
Il n'y a pas besoin de telecoder avec la valise lexia la nouvelle pompe hydraulique ?
Merci beaucoup pour la vidéo c est tres important
Hola!
¿Se puede cambiar la bomba de suspensión vaciando el circuito hidráulico desde el depósito?
De esa manera no sería necesario subir el coche en un elevador.....
¿Se puede?
-----------------------------------
Hello!
Can the suspension pump be changed by emptying the hydraulic circuit from the tank?
That way it would not be necessary to climb the car in an elevator .....
It can?
Change as you like. The most important thing is to take pressure off the system.
Yo te recomiendo que veas este video como se vacia por arriba...
m.th-cam.com/video/ADUncPkUEws/w-d-xo.html
Hey Buddy, I have a little problem with my C5 2002, H3 system, it's not as soft as it should be when crossing over small sharp holes on the road, and places where the road is healed by the holes, and it makes some noise when crossing over these, esspecially rear right side... I changed almost everything, rear arm bearings, sillent bloks, new IFHS comfort spheres and still same... I was told at forums from several people that depressurizing system could help, because I changed spheres... any idea..??
I’m having some issues with my 2001 c5, there is a humming noise on steering and the suspension raises very slowly from low. Also if a heavy passenger gets in the rear, the rear will not rise to normal ride height. I am thinking the pump is weak and is about to fail. Does this sound correct to you? If so, can get the pump refurbished or is it best to replace with new? Cheers mate
Judging from the problems you listed, you should change the hydraulic suspension pump. Is the hydraulic oil level normal? Did you mix up the oils?
Level is good and no issues with oil mixing. What’s the story on new pumps? How much are they or can old ones be fixed? The motor seems to be running ok on the pump so maybe there are orings or something failing in these?
The best solution is to buy a used pump.
How’d u know it’s any good though? Have you ever taken one apart to see if they are refurbishable?
It's a matter of luck. It's best to look in a crashed car. A new one costs about 1000 euros.
Hello and tnx for useful video
suspension on my sometimes works but sometimes doesn't work u know what's the problem?
Sorry, I can't say anything useful with this little information.
есть вопрос? по электрике машина прыгает...зад ... не видит калибровки .. когда нибудь с таким сталкивались ?
yeah!!
Super robota!
Als DS-Fahrer kann ich nur den Kopf schütteln, hier muss man noch nicht das halbe Auto zerlegen...
Is it the same on C5X7 2008 2.2HDI?
great video .. I wonder if my C6 is similar .
Any Citroën c6 pumps work please
Hey citroman, soy de Lima, Perú gracias por el video. Tengo un c5 hay 2 cables del motor hidráulico que se han quemado y ahora el auto no sube 😭 estoy buscando ayuda 😭
Que cables son?
Is it 11mm ore 10mm?
Tengo un zx y aprecio su comodidad, mas un modelo hidroneumåtico siempre me ha intrigado y atraído (el xantia) pero al ver tanta complicación me lo pienso dos veces.
321235km on the original hydraulic suspension?
That model use LDS ?
А что происходит в конце 10 минуты? Как машина начинает подниматься?
Fantástic video thank you
The opening picture shows a Citroen c5 mkIII and then you show the old wreckage ???
Un buen trabajo y un vídeo estupendo
sorry to be so offtopic but does someone know of a method to get back into an Instagram account?
I stupidly lost my login password. I appreciate any assistance you can offer me!
@Oscar Wyatt instablaster ;)
@Billy Dariel I really appreciate your reply. I got to the site thru google and Im trying it out atm.
Takes a while so I will get back to you later when my account password hopefully is recovered.
El módulo electrónico que controla los solenoides necesita programación. Si la bomba es recuperada de otro vehículo no va ha funcionar salvo que intercambies los módulos electrónicos de control o sepas como programar el módulo.
Hola, tengo un c5 y le cambié el módulo de suspención. Pero no me reconoce lo chequé con lexia3.
Por favor me puedes informar cuál es el procedimiento para programar el módulo? De antemano gracias por la información.
What's the story with that fuse you changed? Higher amps?
????
I changed it with a new one because the old one was bad.
Copy that mate. Good job.
Où séjournez-vous en France ?
Hallo, ich habe derzeit das gleiche Problem, allerdings ist mir die Sicherung nicht durchgebrannt, kann meine Pumpe auch direkt durchbrennen, vielen Dank im Voraus
Citroen C5 2.2 HDI 2008
I i have same problem did you fix it and how?
Ma le idroattive non vanno alzate al massimo prima di alzarle sul ponte??
Hola una consulta: yo tuve q cambiar la bomba hidráulica y se m fue todo el líquido LDS. Necesito purgar el sistema cuando tenga que agregar ese líquido con la.bomba nueva ?
No se purga solo lo bajas completo y le hechas liquido lo volves a subir así hasta q el liquido del tarro qede x la medida q necesita tmb move el volante para los costados para así circular bien el liquido
Бампер и фару обязательно снимать?
Неабезательно, но облегчает работу
@@CitroMan он не облегчает работу, а создает себе лишнию. Там и без снятия фары, удобно все снимается.
Merci
Hola mi c5 se baja solo de trompa que puede ser?? Levanta bien pero cuando paro en un semaforo se baja solo y aveces cuando voy circulando tambien se baja
Puede ser problema de programación, desenchufa un borner de la batería x 10 segundos y volvemos a conectar se recetea la computadora
megustaria saber como se rraliza este proceso y el cambio de los demas liquidos en el c5 fase 3 si alguien tiene tutorial..
thanks
Без подъемника это сделать можно?
Hola espero que me contestes sé podra instalar la duspenciofr
hola soy william y quiero que si me pueden alludar como se puede cambiar luz cetral de freno al citroen combi C5
عمل إحترافي ممتاز
اخي الكريم هذي السيارة مازوت ولا ليصونص
can i brake after hydraulic suspension fail?
@ibrahim kozan Thanks a lot my friend!
Yes, in c5, the brake system is independent of the suspension.
hello, i have a 2001 c5 that display ''serious suspension fault''' and when i press up or down button it show a big x on the screen, do you have any ideeas? thank you!
I have yet to come across this problem myself, so I can't help, sorry.
@@CitroMan if i change hydraulic pump(i have one from another c5, same year, engine body type) do i need to make some setings in car computer or the car computer will recognize and accept the new pump with out me doing any setings?
If the hydraulic pumps are the same, you don't need to do anything (just pay attention to the codes).
How was fixed the issue?
I have a citroen c 5 the heating has stop working
класс !!!
Citroen C5 1 and 2 LDS
excelent 10
Pourquoi le fusible a cramé???
La pompe est en court circuit , h.s , donc fusible saute.
❤😊
Bien tarbajo
salut..👍👍👍👍👍👍👍
there is no need to remove headlight.
It's faster and more comfortable to do some things when the headlight is removed. It's also easy to remove it.
CitroMan I do not work like that. it is too much job for the same thing I do with headlight. but if You say it is easy than OK. pozzz
Blz
This tells me, never buy a Citroen 😁
забыли установить омыватель правой фары.
Hi can get your email please?
Got problem with my suspension.
C5 X7.