Circuit Board Prototyping: Breadboards, Padboards, Stripboards and More
ฝัง
- เผยแพร่เมื่อ 28 เม.ย. 2018
- In today's video, we're going to discuss some of the available options for circuit board prototyping, from breadboards to stripboards and more. We'll also give a demonstration on how to solder circuits on padboard.
Prototyping boards are great for early stages of design, or even as a final board used in hobbyist DIY projects like DIY pedals and more!
If you enjoyed the video, please like and leave us a comment below! Subscribe to our channel for frequent video updates.
Breadboard:
www.amplifiedparts.com/node/4...
Zipwire 10CM:
www.amplifiedparts.com/node/4...
Zipwire 20CM:
www.amplifiedparts.com/node/4...
Junior Genius Blinky Lights Kit:
www.amplifiedparts.com/node/4...
Solderable breadboard:
www.amplifiedparts.com/node/4...
Stripboard:
www.amplifiedparts.com/node/4...
Padboard (General):
www.amplifiedparts.com/node/4...
Padboard (1590B size):
www.amplifiedparts.com/node/4...
Padboard (1590BB size):
www.amplifiedparts.com/node/4...
Standoffs:
www.amplifiedparts.com/node/4...
Caig Flux Wash:
www.amplifiedparts.com/node/3... - เพลง
Really helpful for us newbies (even at my age), thanks!
Thank you for this! I hear you build pedals and I'm' looking forward to checking out the rest of your videos. Very helpful!
thanks for the tips on soldering, using the component legs as a conductor track is great, thanks
You guys have some seriously awesome videos for beginners. You've got my business!
same here!
Nicely done. Very precise unstructions.
So clever, thank you for this nice video! I learned a lot about it and will go for soldering stuff in the future.
Very useful. I'm sure it will improve my soldering no end.
Brief and intelligible to a beginner like me. Thanks!
Really helpful in a pinch thank you!
Nice solder up-close demo. :- ))
Great video for beginners and perfectly shows how to use the boards that can be soldered for a more permanent design . Shaky hands, reduce alcohol/stress intake lol!
I'm glad I found this channel. I'm trying to design a smart PC monitoring system for liquid cooling and the challenge is the cooling system is remote from the PC case. Koolance in Washington state has used serial cables and PCI slot covers with female serial ports and paddle cards for temperature, fan and flow metering to their remote units, and also a means of starting the unit with the PC via a 12v Molex from the power supply. They also have higher power units where the 12v from the PC PSU simply turns on a transistor switch allowing the remote unit to turn on; it's plugged into the AC outlet. If course they're not going to give away their trade secrets by providing a schematic on how this is done. I worked at a switch mode power supply company in the 90s who after having a functioning prototype had the AutoCAD department design a circuit card for the strip board design and outsource a third party to print up the circuit cards. This would be bought in bulk and wouldn't be practical for an individual. So this channel will aid me greatly. Thank you.
Thank you very much this video really helped me!
Thanks - this was the clearest description of how to use padboards that I have seen. Stripboards don’t make much sense when I am using an Arduino Nano - most of the pins I typically don’t use...
Thanks, Jim! Glad we could help.
well it is quite the opposite. for IC type strip boards are the easiest as mostly each pin would have multiple parallel connections
Instablaster
2:00 how to use a padboard. Extremely helpful
Great video - Thanks!
Very helpful video, thank you
Thanks for sharing love your store have a lot of nice quality products looks like a lot of it's genuine that's a big deal these days 🤗💖💯 I will definitely shop. And thanks for the great video.
Super helpful dude, I’m just starting my electronics journey and any bit of info helps! Thanks heaps
Agreed! Thanks very much!
Awesome! Thank you :)
Just made my first order @Amplified Parts.
Very informative :)
That trick with the resistor lead bending over to form a connection was really nice! I was looking for videos on how to attach wire to my components (still haven't found anything :D) so I didn't even consider doing connections this way!
That's actually the preferred way to do things, as the lead is unbroken. The alternative is to use a jumper wire on the other side or the same side, but there's always a chance that an overheat will cause the joint to melt and the wire will fall off.
What I found interesting was to use solder(and not jumper wire) to bridge adjacent nodes. Much cleaner that way. Uses a lot of solder though.
thank you
could I cut down a padboard if I needed something really small to only hold a few components?
So at 5:27 that 8-pin component opposite side legs (3rd from top) are actually connected? Why only the right side has the red rectangle and not on the left side if the whole row is on same potential level?
this stuff was never properly explained in my class.
why did i pay fees?
What are the advantages of using the 2 Holes per pad compared to 1 hole per pad?
Could hot melt glue be used in place of stand offs when you don't care about being able to easily get the board out again?
Hot glue may not be the best choice. Plastic standoffs are easy to install: www.amplifiedparts.com/products/standoffs-018-plastic-adhesive-backing
what solder is he using? looks better than mine.
On stripboards, what tool do you use to cut the traces? You skimmed over that.
Chainsaw
Are stripboards and general purpose PCBs the same thing? I’m trying to build synths!
Stripboard is made of the same materials as a standard PCB but with an open layout for custom prototyping. Some people like the simplicity it allows for layouts but space can be a factor so for tighter layouts, protoboard can be a better choice. That being said, there are some creative stripboard layouts that maximize space very well. If you are interested in building synths, we carry a variety of components commonly found in synth / eurorack projects! www.amplifiedparts.com/products/synth-eurorack-parts-diy
fucking awesome
How are called the little white feet at the end? Stand offs?
Yes that is indeed what they are called. There are links to all of the products used in the video in the description, including the standoffs, so definitely check them out!
For prototypes it don't mater do you use strip or pad boards. If size matters then pad board but it will be more like rat nest.
Done key needles?
Foot palmas
Do PCB's have positive and negative terminals like breadboard do? Or is it just a piece with no negative and positive terminals
Nah It's more generalised , you have a supply and earth. Supply can be negative or positive.
You can choose the potential points yourself.
I am 60% sure this is Jack Black
And 40% sure it's Kyle Gass?
4:50 that board looks kinda sad ngl : |
4:44 :l
Male to Male, Female to Female. I hear it is even legal in Alabama now.
Please be careful when using a breadboard. It will create frequencies that will enter your body and cause damage.
Wrap either the breadboard or your body in tinfoil to block out the frequencies. You must be careful with frequencies.
Thanks for sharing this video & information it has been helpful. de AA4SH