ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- This video shows how to install firmware of T.SK105A.03 universal TV board using CH341A SPI programmer and fix the remote control. Tips and Tricks.
Please like, share, and subscribe. Thanks
The file: drive.google.c...
/ teva-electro. .
![[Watch Party] RoV Pro League 2024 Winter | with Moowan ( Bacon Time Vs Talon )](http://i.ytimg.com/vi/CCEDhu6dPN8/mqdefault.jpg)
I had a similar issue with flashing the firmware. But I managed to flash it with a trick. On the back side of the board, they have a white label with the exact model. On my board it was S53BKC14(PA) then I renamed the firmware file from UTS6710_100bin to S53BKC14.bin and I put only the bin file into the flash drive. Then I flashed the board successfully into proper T.SK105A.03 and now I can flash new firmware without problems.
That's a great discovery. Thanks for sharing your knowledge. Maybe I should make a video of it someday.
Stefan Stefanov, I did the same thing and it worked. However, my device is always blinking and does not work anymore. After flashing the firmware for the first time, do you still need to rename the file every time?
Can you please say what name, if white letters o name of the chip? Thanks
@@doblejote the chip of my board is Unisoc UTS6710-X
@@Stefan.Stefanov is the same I have, I try rename but no response and no label. Did you find the info in a blog? the info for change the name of the bin. Thanks again.
Good great best job thanks for sharing 👍🏾
sir i have one issue. when i trun on the board, its other all functions are working but no display. i tried to install the software but the red light won,t blinking pls help me
good
Waiting for this one
Good
watching master
Thanks
Awesome bro
I am facing same problem!!!
I Need more information about that spi Programmer!!!
Google it.
@@tevzTVTevatronics after spi programming framware upgrading by usb possible? Or not
Friend, What is the identification of this voltage regulator MOSFET?
Good boy
👍👍
Hello.
I have the same board with a burnt component. Can you help me to find the reference? It's a SOT23 component with 5 legs near the board reference (T.SK105A.03) and the DIP arrow.
Thanks in advance
hello I need your help, I want to adapt a led panel k400wd8 (AOC BRAND) I have the plate T.SK105A.03
Use the compatible LVDS cable, and flash the right firmware.
Bro is there any other way to flash the board? I don't have the reprogrammable device like you do. I am a non technical person. If there is an easy way please make a video. When I am inserting the usb for flashing the light did not blink.
You can try other firmware online may be one of them will work. try the latest.
Sir pwd ko bang kunin ung Memory chip sa lumang board at ipalit sa new board prehas po sila..Para hindi ko n gawin ung manual flashing..Salamat
pwede naman.
@@tevzTVTevatronics sir ngbbnta k b ng board na t.sk105a.03..ung ready to used na..tnx
Hello sir, how can I pass config IR hex from 4mb to another bin, tell me what's exact hex position of the IR config, so I will paste tie block and will not loss the original TV remote
I have no idea how hex position ir config. There is firmware or bin file support for Samsung, Sony, LG, etc. But this type of board has not yet been tried.
Hello, does anyone know what command to use the mi remote and fire tv as a control for this card?
Hello. Please I need firmware t.sk105a.a8 for 1920x1020. Thanks
Hi, i got black screen (backlight is on but no video) and i can't flash firmware. Can you help me somehow?
check LVDS connection
@@tevzTVTevatronics Do you maybe have T.SK105A.03 datasheet?
Sir is it possible to use that firmware to upgrade my new universal led tv board model RR83.03C?
The board has only PAL system no NTSC.
Thank you Sir
i have same board installed on my lcd tv T.SK105A.03, i have problem no sound. speakers are fine may be problem on board. Sound IC looks good no burnt found. any solution?
I don't experience audio issue. But I have experience a no channels issue, I think this model now have a factory defect.
Sir can I used the old SPI chip from.old board and replace to my new board bought to shoppe? Instead of manual flasing using CH341a programmer?thank you
Yes you can.
Boss pano po kung wala pong masagap na channel? bagong bili po itong board ko, ok naman po yung firmware pero wala makuhang channel? na chek ko napo yung antenna wala namang problema. nag auto scan na ako ng ilang beses pero wala parin. Thank you
Baka defective yung nabili mo. may dumating din sa akin na ganyan,
Is reprogramming the only way? Please answer it as fast as u can after u see this. Ty
You can use led tv universal remote and search the code.
So i need to buy a new chip and just solder it? Sorry... I can't understand and TY for answering... Pls simplify it.
@@zarinazainuddin8820 Your question is reprogramming the only way? My video is about the remote control is not working. So the other way except reprogramming is to use universal remote control. I did not know the code, you can scan the code using the universal remote. scanning the code is in the manual indicating how to scan code by the universal remote.
Ok ty👌i understand. Ty for the answering
Umm... Sorry for interrupting... I have another couple of problems... May i ask if u dont mind...
1. Can the board recieve signals from the remore control with a firmware running on the board
2.how many volts does lcd backlight need (ht12x13-100)i tried using 12V but still did not light up or maybe the power for the backlight is at the lvds connector but i dont think it at the lvds connector tho
3. How to insert the lvds connector it doesnt have any sign where's the right one and the left one
And again sorry for interrupting
Good job my broblem is that the image is corrupted can you help me if you can send me your e mail address, i will send you photos of the problem
Can you please tell me the remote details of this particular board. I lost my remote and try with different remotes not working. Can you name the model number please.
There is no details. If the remote is not working try this. th-cam.com/video/0Lgh0RnhgYc/w-d-xo.html