Great job, and very easy to understand especially with all the pieces to show the differences. Thanks for explaining the differences between the 15mm and the 14mm. Cheers
Glad I saw your video and had to go back to Amazon and order the 22x15 connector. Great video and thank you for your service, from a 73 year old VietNam Army Veteran. Great explanation too, glad I corrected the problem before it happened. Peace.
M22/14 is in general used in Europe and on Electric Pressure Washers ..... M22/15 mk is in general used on Gas Power Washers for industrial use and American electric machines seem to have adopted it .... The end of the male section on 15mm is domed slightly and the 14mm is flat headed Then there's the issue of the actual QR plugs and connectors coming in either 3/8" or 1/4" the whole set up is a nightmare
just throwing this out there as far as them quick connects they sell them in 1/4 and 3/8 and I do believe even 1/2 for these power washers. I know they sell them and them sizes for air hoses. I seen them on Amazon in the 1/4 and 3/8 version for power washers. I'm honestly going to try to buy every fitting there is to buy for a power washer and I will figure my solution out. thanks again for your time
Thank goodness I found this video because I have the same pressure washer, factory hose, Uber flex. And had the surging problem too and I’m looking for the right fitting.
Great job explaining the difference between the 2 types. I am in the process of setting up a new pressure washer and ran into this issue. There seems to be an unwritten rule that electric washers use M22x15 and gas use M22x14. As you say, once you convert to quick connect, all accessories become interchangeable.
Tried looking online for what connection my pressure washer has and didn’t succeed, even the manual online didn’t have any information. after that I contacted the customer support and they told me it’s a 22M14. only to realize today it’s not fitting after I already got it 😑
Landon, I’m confused still. I notice you linked the kit in the description. When you scroll to the 3rd photo it says it is M22/14 not m22/15. My electric pw is m22/15
Thanks Bro…just what I was looking for when connecting my Simpson power washer hose to a foam gun sprayer to wash my car. A regular hose does the trick but the pressure washer it’s better
So if I order the pressure washer and the uberflrex hose, what are all the fittings required to make this a quick disconnect for pressure hose and garden hose.
@@AQUALUXAUTODETAILING So I did all this with my uberflex to sunjoe washer & I'm getting some pressure kick back..do you think I need to connect m22 15 to m22 14 connector to the pressure washer that way I'm connecting a m22 14 from the hose to m22 14 to the pressure washer.
Jesus, Lord and Mary ! God Bless You, I am relatively handy and not considerably hard headed but DAM trying to set up a quick connect to my Paxcess electric pressure washer had me doubting the purchase to begin with....Thanks for sharing. You spared me a whole lot of grief and I am sure a migraine or two.
Where did you get that brass fitting with the M22 threads that is 15mm in diameter on one end and 14mm in diameter on the other end? You never said where you could purchase that. THAT'S what I need!
@@AQUALUXAUTODETAILING Thanks for the info! Unfortunately the Uberflex is double the price :( maybe I can find it on another website, but Amazon is marked up way too high because it's barely in-stock. I'll search a bit more, but by the sounds of it just go with the cheaper hose between the two and it would be better than any stock hose.
Which hose do you like better the Flexzilla or the Uberflex ? The Flexzilla is $64.78 and Uberflex is $42.99 . I am setting up an Active VE52 with MTM SGS-28 gun and a swivel adapter. Thanks
@@AQUALUXAUTODETAILING but the standard hoses that comes with the pressure washer are non flexible haha (except for AR Blue, but i have a Lavor) I think i found one on Amazon finally!! The material is polyester. do you think it is flexible enough?
AQUALUX AUTO DETAILING I need the quick disconnect from the active power washer hose actually need 2 1 for the water Hose and other for power washer hose do I need the adapter you show here?
Thank you it has held up great I got the quarter inch and yes I think the quarter inch is the best size in 50 foot I’ve had it for I think two years now
@@AQUALUXAUTODETAILING Just a thought... Decrease in size/ diameter equates to restriction in flow. This is why reducing the orifice size at the output of a spray/foam cannon helps a lower pressure washer create better foam. Conversely, decreasing at the input will lower the input (supply) pressure before the washer tries to pump up to pressure, robbing the washer of output pressure. Decrease the hose diameter is the same as the orifice only at the input side. Also, there is a pressure drop AND greater recovery lag over distance. Lag being cycle time to recover the pressure loss. Not much you can do about input/ supply pressure, but you can do a few things to prevent restrictions. Use the largest hose diameter on the shortest hose required for the job. Think about the GPM rating of the washer. You need to feed it at least what the output is capable of or, better yet, more than. Hope this helps 😉
Good points. Is the 15mm hose the active uses partly why it can achieve such a high gpm? Logically you make sense I’m wondering if it’s caused problems in the practical sense.
so there's only two sizes of power washer hoses? the m22-14 and m22-15 correct? or is there others I'd imagine that they would make standard 5/16 1/4 3/8¿ I mean why not just make everything really fckin confusing just because they can. my dumbass bought a hose from Walmart after purchasing a son Joe power washer from Amazon thinking that I would be able to connect it to. I threw the hose in the corner and figured I'd deal with it later springs coming up this year so I'm starting to look back into it again to see if I can connect these two hoses. and I don't know what size threads are on the one from Walmart it's a Uber flex pro pulse quarter inch 3800 PSI 140° not for hot water made in the USA. but the fitting is larger than m22-15. one of the good things purchasing things through Amazon you can go back and review and they give you information on the product that you had bought. in this situation anybody has an opinion on how to guesstimate the threads on the Uberflex hose? because I can't find it on the Walmart website. I guess I could drag the hoes with me down to Lowe's or home Depot and start screwing fittings in it to see which one I can find to match LOL anyway thank you for your video
I've had a migraine for 3 days now over this. This type of information needs to be in bold print from anywhere you can by this stuff. A website with every powerwasher, cord & connection etc that shows what's compatible & what's not like a tire website. My Electric power washer has a 15mm power washer cord connection....found that out days later 😑😑😑 I just sent my 50ft Uberflex back because they are 14mm....found that out days later 😑😑😑 Your telling me I wasted my time sending that back??! I also sent back a 14mm quick connect kit & getting the 15s instead. I dont want to use the 25ft concrete power hose that came with my electric washer..... So should I order the UBER-FLEX back? My short power gun is has the adapter for a 15mm so I can keep that.
Exactly. Electric pressure washes are mainly 14mm as well. I’m guessing tho the 15mm hose and connects help boost gpm? Not sure by how much but makes sense that it would.
No sir I’m sorry that’s not correct..plenty of electric with both set ups. Hence the reason for my video sir. But thank you for taking the time to watch
Whichever came later M22/14mm or M22/15mm should be boycotted, so they never create this headache again!
i think electric if you think about it 😅😅
Great job, and very easy to understand especially with all the pieces to show the differences. Thanks for explaining the differences between the 15mm and the 14mm. Cheers
Glad I saw your video and had to go back to Amazon and order the 22x15 connector. Great video and thank you for your service, from a 73 year old VietNam Army Veteran. Great explanation too, glad I corrected the problem before it happened. Peace.
Mr Carlton Thank you for your support 🙏🙏🙏
In this inverted world the dept of defense is always on offense. Cmon already and wake up. You were lied to sir.
M22/14 is in general used in Europe and on Electric Pressure Washers ..... M22/15 mk is in general used on Gas Power Washers for industrial use and American electric machines seem to have adopted it .... The end of the male section on 15mm is domed slightly and the 14mm is flat headed
Then there's the issue of the actual QR plugs and connectors coming in either 3/8" or 1/4" the whole set up is a nightmare
I'm glad the Marines were able to teach you numbers and which one is bigger.
Me too it’s rough
Pussy
just throwing this out there as far as them quick connects they sell them in 1/4 and 3/8 and I do believe even 1/2 for these power washers. I know they sell them and them sizes for air hoses. I seen them on Amazon in the 1/4 and 3/8 version for power washers. I'm honestly going to try to buy every fitting there is to buy for a power washer and I will figure my solution out. thanks again for your time
Thank goodness I found this video because I have the same pressure washer, factory hose, Uber flex. And had the surging problem too and I’m looking for the right fitting.
Awesome video! Really didn't know there were different sizes! Can't really look at it and tell. Thank you
Happy to help
Just ordered my M22x14 kit off of amazon. Hooking it up tonight.
Great job explaining the difference between the 2 types. I am in the process of setting up a new pressure washer and ran into this issue. There seems to be an unwritten rule that electric washers use M22x15 and gas use M22x14. As you say, once you convert to quick connect, all accessories become interchangeable.
Thank you and thank you for taking the time to watch
This is the video I have been searching for. Simple direct to the point. Please thanks. Please what is the psi and GP of the machine you use?
2.0 gpm 1200 psi
Hey can you suggest some connector to connect a m22 type hose pipe to universal type pressure washer
How do you like the UberFlex hose compared to the Flexzilla hose?
Both are great, can’t go wrong with either one
@@AQUALUXAUTODETAILING thank the fed back
Thanks for the clear explanation.
Happy to help
Thank you for clarifying the difference!
Thank you this has been a BIG HELP
🙌🙌
Hope this isn't a stupid question but does it come with the adaptor for your gun ? My power we washer is gerni brand in Australia
Some do some don’t
Tried looking online for what connection my pressure washer has and didn’t succeed, even the manual online didn’t have any information.
after that I contacted the customer support and they told me it’s a 22M14.
only to realize today it’s not fitting after I already got it 😑
Landon, I’m confused still. I notice you linked the kit in the description. When you scroll to the 3rd photo it says it is M22/14 not m22/15. My electric pw is m22/15
Plazz reply. Which quick connect size is compatible with karcher hd 6/15 classic?
Call the customer support
The link in description is for m22 14 kit, do you have a link for m22 15 kit?
amzn.to/3gLTOr6
@@AQUALUXAUTODETAILING thanks! Just place my order for the active ve52 pressure washer so I'm pumped and hoping for good results
👊👊👊👊🙏🙏🙏🙏🙌🙌🙌🙌 so awesome!!!!
Thanks Bro…just what I was looking for when connecting my Simpson power washer hose to a foam gun sprayer to wash my car. A regular hose does the trick but the pressure washer it’s better
So if I order the pressure washer and the uberflrex hose, what are all the fittings required to make this a quick disconnect for pressure hose and garden hose.
They sell a set at Lowe’s or you can check out the kit that has link in the description
I KNEW I WASNT CRAZY, thank u!!
Thanks for breaking it down!
Amazing breakdown...this helped so much.
Happy to help
@@AQUALUXAUTODETAILING So I did all this with my uberflex to sunjoe washer & I'm getting some pressure kick back..do you think I need to connect m22 15 to m22 14 connector to the pressure washer that way I'm connecting a m22 14 from the hose to m22 14 to the pressure washer.
Jesus, Lord and Mary ! God Bless You, I am relatively handy and not considerably hard headed but DAM trying to set up a quick connect to my Paxcess electric pressure washer had me doubting the purchase to begin with....Thanks for sharing. You spared me a whole lot of grief and I am sure a migraine or two.
@EdwinBonet Happy to help sir. I know how frustrating it can be sir. Thank you for the support and for watching. It means a lot!!
Where did you get that brass fitting with the M22 threads that is 15mm in diameter on one end and 14mm in diameter on the other end? You never said where you could purchase that. THAT'S what I need!
amzn.to/3bp8eO3
Every hardware store carries them. Lowes, Home Depot, Ace, etc.
Would like to see a review comparing Uberflex and Flexzilla hoses
Same patent zilla color is unique that’s it.
Thank You!😊
Is the Uberflex a lot better than the Flexzilla pressure hose? Hard to get Uberflex where I live, but it's easy to grab some Flexzilla.
honestly they both look and feel the exact same to me. I think the uberflex is still the better deal currently on amazon.
@@AQUALUXAUTODETAILING Thanks for the info! Unfortunately the Uberflex is double the price :( maybe I can find it on another website, but Amazon is marked up way too high because it's barely in-stock. I'll search a bit more, but by the sounds of it just go with the cheaper hose between the two and it would be better than any stock hose.
@@alabaska182 yes with everything going on right now just find one of those two for the better price and you will be golden!
Hows the flexzilla hose?
It’s amazing 3 years going strong!
Funny my amazon m22-14 QD kit came with 14 makes but 15mm female. It will work out for me but they’re sending a replacement anyways.
I have a SPX 3000-XTI I want to order the Uberflex 1/4 “ X 50’ 3,000 PSI what connected do I need.
Semper Fi
For the hose just standard m22x14 lowes or home depot carries then
Semper Fi!
Which hose do you like better the Flexzilla or the Uberflex ? The Flexzilla is $64.78 and Uberflex is $42.99 . I am setting up an Active VE52 with MTM SGS-28 gun and a swivel adapter. Thanks
They both are great. If the 50 ft Uber flex is that price that’s what I would buy.
I cant find any of these strechable hoses here in Italy, that's so annoying
That’s crazy Bc a lot of pressure washing parts are made in Italy
@@AQUALUXAUTODETAILING but the standard hoses that comes with the pressure washer are non flexible haha (except for AR Blue, but i have a Lavor)
I think i found one on Amazon finally!!
The material is polyester. do you think it is flexible enough?
Perfect explanation my man thank you!
Can you do a video about all the easy conetctors for the power washer active please i mean quick conectors, just bought one haven’t shipped yet thanks
link is in description of the video go to the m22 x15 and you are all set.
AQUALUX AUTO DETAILING I need the quick disconnect from the active power washer hose actually need 2 1 for the water Hose and other for power washer hose do I need the adapter you show here?
Thank you God bless 🙌
THANK YOU !!!!!!
Happy to help
Why do you need to change the original one out?
killakxx x bc it won’t work w a stand hose if you don’t.
Great video! How has the Uberflex hose held up? Did you get a 1/4" or 5/16"? (Does it matter??)
Thank you it has held up great I got the quarter inch and yes I think the quarter inch is the best size in 50 foot I’ve had it for I think two years now
@@AQUALUXAUTODETAILING
Just a thought...
Decrease in size/ diameter equates to restriction in flow. This is why reducing the orifice size at the output of a spray/foam cannon helps a lower pressure washer create better foam.
Conversely, decreasing at the input will lower the input (supply) pressure before the washer tries to pump up to pressure, robbing the washer of output pressure.
Decrease the hose diameter is the same as the orifice only at the input side.
Also, there is a pressure drop AND greater recovery lag over distance. Lag being cycle time to recover the pressure loss.
Not much you can do about input/ supply pressure, but you can do a few things to prevent restrictions.
Use the largest hose diameter on the shortest hose required for the job.
Think about the GPM rating of the washer. You need to feed it at least what the output is capable of or, better yet, more than.
Hope this helps 😉
Good points. Is the 15mm hose the active uses partly why it can achieve such a high gpm? Logically you make sense I’m wondering if it’s caused problems in the practical sense.
Dang. Great video.
so there's only two sizes of power washer hoses? the m22-14 and m22-15 correct? or is there others I'd imagine that they would make standard 5/16 1/4 3/8¿ I mean why not just make everything really fckin confusing just because they can. my dumbass bought a hose from Walmart after purchasing a son Joe power washer from Amazon thinking that I would be able to connect it to. I threw the hose in the corner and figured I'd deal with it later springs coming up this year so I'm starting to look back into it again to see if I can connect these two hoses. and I don't know what size threads are on the one from Walmart it's a Uber flex pro pulse quarter inch 3800 PSI 140° not for hot water made in the USA. but the fitting is larger than m22-15. one of the good things purchasing things through Amazon you can go back and review and they give you information on the product that you had bought. in this situation anybody has an opinion on how to guesstimate the threads on the Uberflex hose? because I can't find it on the Walmart website. I guess I could drag the hoes with me down to Lowe's or home Depot and start screwing fittings in it to see which one I can find to match LOL anyway thank you for your video
Same issue i had
it can be frustrating and really make you want to bang your head lol I know it did for me at one point lol
it can be frustrating and really make you want to bang your head lol I know it did for me at one point lol
I bought M22 x 14mm in China, then i have to customized into 15mm. Check out my channel. You can search "Quick Coupling jet cleaner" on TH-cam
On Amazon they sell a Generac pressure washer hose and it is orange!
Well done. Good explanation
Caution- when using a quick disconnect make sure you have it in the correct direction of flow. If not you may get a facefull of high pressure.
Brutal
Agreed
Ok
👌
I've had a migraine for 3 days now over this. This type of information needs to be in bold print from anywhere you can by this stuff.
A website with every powerwasher, cord & connection etc that shows what's compatible & what's not like a tire website.
My Electric power washer has a 15mm power washer cord connection....found that out days later 😑😑😑
I just sent my 50ft Uberflex back because they are 14mm....found that out days later 😑😑😑
Your telling me I wasted my time sending that back??!
I also sent back a 14mm quick connect kit & getting the 15s instead.
I dont want to use the 25ft concrete power hose that came with my electric washer.....
So should I order the UBER-FLEX back?
My short power gun is has the adapter for a 15mm so I can keep that.
👍
hoses should be standard sizes....unfortunately this usually impacts electrical PWs.....all gas washers are usually M22-14
What most people don't understand is the electric pressure washer for home use are mostly M22 15mm. Gas pressure washers use M22 14mm.
Actually many are 14mm. Craftsman, Greenworks, Ryobi...
Exactly. Electric pressure washes are mainly 14mm as well. I’m guessing tho the 15mm hose and connects help boost gpm? Not sure by how much but makes sense that it would.
99% of time Electrics are 15mm and Gas are 14mm regarding pressure washer unit m22 threads and the fittings on the hoses that come with each.
Nice and tight LOL
🤘🤘
#NiceAndTight #thetruth
God bless you.. lol
May God Bless you!! Merry Christmas 🎄 🎄🎄
Why all these complications!!!!!
Saleh, Idk but I try to help figure out all the confusion.
..?????????????
???????????????????
Why would anyone need to know this, it's so simple! lol
Well I am pretty dumb so it took me a while to figure it out...but you do not know what you do not know.
@@AQUALUXAUTODETAILING It was sarcasm brother, this is JT!
Yes right, i have to bring this quick connect to turner just to make it 15 mm from 14 mm.
th-cam.com/video/AJ-Hlnc_BHA/w-d-xo.html
Erah
3/8 wahhhhh ???
15mm is for Electric pressure washer and 14mm is for Gas pressure washer hose.
Not true
Really? It’s that why 90% of electric PW brands use 14mm? We get enough disinfo don’t need yours too.
@@annagraham6204 don't be an Ass if you don't want to believe it that's is your own a pinion.
14 = gas. 15 = electric Duh
No sir I’m sorry that’s not correct..plenty of electric with both set ups. Hence the reason for my video sir. But thank you for taking the time to watch
You're talking in circles. Do it over and make some sense...
Don't care if you're tired... just quit blabbing and get on with the subject