Dropped The H22 In The Honda Civic - First Ever Engine Swap
ฝัง
- เผยแพร่เมื่อ 3 ธ.ค. 2018
- The time has finally come. The first ever engine swap is complete. And after a total of 4 occasionally frustrating hours the h22a has dropped into the ek civic hatch. The engine is a tight fit, and i mean tight, almost concerning. but it works and i am glad to have reached this milestone. Quickly going over the episode in the beginning i complete some additional sound deadening on the rear end panels. First, i seal it with some leftover por15 to ensure a stronger barrier against moisture. I also used some Krown lubricant oil to double up on protect. I am paranoid of rust and don't want all that hard work to be spoiled by rust. so hopefully, fingers crossed I have done a good enough job preventing that issue. Anyways after that, I moved onto the engine. Basically rethreaded all the bolt housings to make it easier to install the brackets while the engine was going to be dropped into place. Avoiding cross threading is important at this point. The engine was tough, especially because you cannot hit it straight up and level and drop it. the transmission end has to drop to the ground on a 45-degree angle and then you can balance out the rest bit by bit. I mounted the driver side mount first to help guide the rest, the transmission was second then the rear mount. All and all a long 4 hours but definitely a learning experience. Hope you like it because I am stoked for what's next.
Music by Joakim Karud / joakimkarud
Buy on BandCamp: joakimkarud.bandcamp.com/track/lullaby
For updates about upcoming music and other stuff:
- joakimkarud
- joakimkarudmusic
Get all of the music here:
- Spotify: open.spotify.com/artist/0iAOXvEDIMaAWPP5Ur0fYF
- iTunes: itunes.apple.com/artist/joakim-karud/id429649160
- Bandcamp: joakimkarud.bandcamp.com/
- Soundcloud: @joakimkarud
- More: smarturl.it/joakimkarud
Download for free on The Artist Union: theartistunion.com/tracks/c6cd45 - ยานยนต์และพาหนะ
![CAMPปลิ้น | EP.79[1/2] แก๊งไทบ้านพาบุกเมืองบั้งไฟโก้ ยโสธรรรร!!!](http://i.ytimg.com/vi/Ldr3_fvTEXk/mqdefault.jpg)
Always great to see a H22 Honda Civic.
reall dope hard work man. good job. down to the threading where the bolts go , you brought all that back to life. this car body should easily last another 30 years or more
Haha damn great job on the prep work for a first swap
the ole seat belt trick excellent
We're on the same journey bro, I'm going H2B on my EK hatch, Love the videos keep it up!
get that s80 lsd out of 98 spec itr with that 4.7 final drive :P
Wiring help please h22 ek swap
Good work
hella lit content as usual
Love me some h22 powered civics. Got a f23a in mine. 👍
Good engine, eg?
Subscribed! I also have the same engine, but it's on the 97 Accord :)
dude.. love your chanel.. amazing work.. i wouldnt be too concerned about rust, you did a hell of a job..i dont recall if you did this or not but if you havent- get some HIGH QUALITY rubberized coating and spray the inside of the wheel wheels ... it will add extra support against rock chips, depris, dirt, and sand flying up and chipping your Quarter panels.. also an added layer of protection to the PR15... i plan on swapping my EK too, was it hard? will be my first swap as well.. probably gonna go with a B series.. you have a snapchat man? Again, great content dude- keep up the hard work!!!!
I needed this video 4 years ago lol I shoved a F20b into a 95 coupe from the bottom. Super tight fit. What are those little wheels you were using to move the car?
Dope AsF*** 🔥
I have subscribed
Just subscribed. Is that still the EK crossmember, or dc2/EG? I just bought a 98 hatch with an f20b swap (basically same as h22 swap) Trying to figure out what I have.
So it’s best to do the t bracket first and then move on so forth?, I have a 96ex I want to do this swap my brother had it in a bb6 and man that shit was fun
👍🏼 looks good jst needs a turbo to finish it of
or itbs
if i had half of your knowledge it would be great, awesome vids
self taught? or trained?
Self taught, Honda tech forums has helped me out plenty during this build
Need some info what size threads for the engine mount passenger side and for gearbox as dont have any threads
Hi can i ask what engine mount and shafts your using currently about to start h22a7 swap into my mates ek civic its coming out of his eg coupe but it sat to low in tht car and the shafts are to long we used b series shaft in the eg civic
pretty hard to put a H22 on an Ae100 Corolla
H2B!
What mount did you use for the driver side post mount and All
So does this just use the Stock d series mounts?
What harness did you use?
Hey man the shell is coming out SOOOO clean!! What is the sealant you we’re using to do the underside of the shell and in the grooves and corners of the floor?? I NEED to know!! I’m also doing a project ek hatch and it looks like that stuff really works! PLEASE let me know!!
The main product that i used to seal it was POR15. There is quite a bit of prep work required for applying that product but in the end can shed some really nice results. And can also last for a long time as well. In the groves i tried to get in there with a brush of the por15 and soaked it in there hoping it seeped in tough to reach areas.
Garage SpeCivic alright because I was thinking about buying spray rubber for the underside of my shell but I mean is their a lot of prep work before applying it?
More prep the better. If you dealing with a rusty underneath I suggest fixing that first before applying a rubber undercoating. Rubber undercoats can cause issue down the line that if water is still there where you sprayed, it will be trapped and over time rust will spread fast. If you scrape the flaky rust if you got it, and convert it, just throw an oil based painted over it and rubber coat if you want. But take your time and good luck
Garage SpeCivic thanks bud I really appreciate it and for welding the repair panels, did you use flux or mig?
flux welded the panels
Man I wish I had to the time to put into a ride like you have instead of just throwing shit together. I hope to see you turbo this, don't know if you said you were or not.
It is the plan to turbo it. First going to pass inspections and then rebuild
@Garage SpeCivic
What do you use for your editing?
Premiere pro
What axles did you use I have h22a in my 95 integra
dumb question im thinking about doing this myself over the summer do u have to completely strip the engine bay i know this is probally a stupid question but gotta figure it out now
Great video, what engine mounts did you use?
Innovative mounts
@@GarageSpeCivic they are the best, got the same in my EK for the H
Hello.. I have a question!! El soporte de fierro que agarra el motor de la parte de atrás es original del mismo motor h22
Exactly
what kinda motor mount you use
and transmission
im doing a h23 swap and idk what mounts to get to make it fit in my ek hatch anyone have the link to the mounts he used
Hello, what axles and driveshafts are you using for this swap
what year is that civic? I am considering putting my H22 in my '97 civic but not sure if I need an EG subframe.
Clean shell with a dirty engine?
Q arnes nese sito para aser mi swap h22 en Honda Civic 2000
Would this be the same transmission the civic would have
what speed sensor did you use
Did axles did u use ?
What engine mounts did you use
What t bracket did you use ?
Next time just lift the civic super high up and then slide the engine through the bottom. It’s easier
Thanks, I will give it a try for future swaps
Issa Me Da Great that's how I pulled my two h22 engines last summer 🤙🏽
will a turbo fit in that thing
Hey I'm looking to the same swap on my 99 ek hatch . I was wondering ifyou can give me a full list in what I need to install the h22 into the civic.
Me too. Iv got a 39,000 mile mint ej9 and planning on a sleeper build
Same:/ can’t find much on it
@@Isack_Roach we need help
It's not that bad. Swap mounts, shifter box cables, axles can be da or dc2 depending on what half shaft you use. Or can use swap axles. You can use the stock civic harness. Will need to extend the alternator wires. Few other wires that you will see. Most of it is plug and play. I swapped a f23a into a ek civic. Damn close to doing a h22 swap.
RedLineBandits thanks man!! Just bought an H22a type s so hopefully she halls
nex time pull engine from the bottom then you will be more with install because on honda's you suposed to install engine through the bottom while lovering carr body from the top
What axles did you use
Hello sir I would like to know what type of spindle you used for the swap or your transmission.if can please let me know I am doing the same swap you completed.
You talking about the half shaft and axles I used?
What axles did you use H?
Hey bro what T-bracket did you use ?
I got a 97-01 OEM prelude rear t bracket mount, came on the motor when I picked it up.
bro need help with my h22a eg
are you go into detail how to wire the harness
I'm going to see what I can do. There doesn't appear to be many good harness videos. I'm very new to it all so I'll have to study up my owners manual and see what I can create. But it is the plan to make a detailed video on the harness
what all did you have to do with the wiring harness ?
Still havent done much with it. All of that is really new to me but I plan to make an episode on it after I study my service manual and tech forums
@@GarageSpeCivic I know some of it like you got use your cars either y8 are y7 b16 engine harnesses plus got use some of the h22 engine harness . I know the dizzy wiring you need to splice together which is all plug and play so to speak like the wire coloring is the same . I have a jdm h22a I'm going swap into one of my Honda's. Be cool to see a good video on it. I'm thinking of doing most of my swap on my channel as well
Subbed to your channel.
@@GarageSpeCivic thanks man I appreciate that. it's not very good quality lol but I try give as much info as possible on the many cars I own mostly my Hyundai but I have DSM Honda's as well hopefully get to my h22a swap soon. I look forward to seeing more of your h22 swap content
fairly easy drop in? didnt bang inside the bay at all? My bay is super shaved and tucked and freshly painted
i went very slow. scuffed the paint a little bit by the transmission side. Used towels and stuff to protect the paint as much as i could. once i got the idea of how extreme of an angle you had to drop in the engine, it went pretty in pretty easy. Took a little time having to attempt to drop it and pull it out, adjust the strap angle and so on. But if you go in right off the bat at a 45 degree angle the drop should be fast. 2 people helps too. That engine fills up the bay though. Someone recommended lifting the front end though and sliding the engine from the bottom. Definitely would avoid fiddling with the transmission side as it can be tricky.
Bro how low is ur engine block from the ground I did a h swap n my engine block is way two low
its not that low, i'll measure and get back to you
What mounts are those????
Innovative mounts
@@GarageSpeCivic what t bracket did you use ?
What transmission
m2t4 lsd
liar