ฝัง
- เผยแพร่เมื่อ 5 ก.ค. 2017
- This is the guide on how to change the turn signal lights for the Mercedes-Benz S-Class (w220)
This guide covers S-Classes from 1998 to 2005
The turn signal light on the side mirror will be released in another video
You'll need the following things:
10mm Drive Socket with Wrench (US units 3/8")
8mm Drive Socket with Wrench (US units 5/16")
2357A Bulb (Front Turn Signal)
7507 Bulb (Rear Turn Signal)
Thanks for watching!
♫Music By♫
●Ryan Little - Sunday Vibes • Video
●Facebook - / iamryanlittle
●Twitter - / iamryanlittle
●Soundcloud - / iamryanlittle - ยานยนต์และพาหนะ
I have replaced the bulbs on my S class without removing the whole light. It’s not easy, but I think it’s easier than what you’re doing.
How did you change the bulb without removing the head light,
It’s been a while, but the manual has a diagram showing the locations of the different bulbs on the back of the housing. Each one has some kind of “push-turn”cap on the back side. Remove the cap to access the bulb. The hard part is getting your hand in a tight place and reaching each cap. I believe there are 3 or 4 bulbs. If you don’t have a manual, you can probably find it online. I still have the car, but keep it in another state.
Great video!!
thanks!
Great videos!!! Thank You
no Problem!
that is Great video
Thanks for the info I just subbed
no problem!
Wow nice s class
Thanks for the video
no problem!
Great video. Thanks Richard. Saved my bacon.
Haha anytime man!
thank you men,very helpfull
no problem!
I thought you were tom from myspace for a second lol
thanks!
no Problem!
Really great as far as Richard goes, but it would have been nice if he'd gone into more detail about how to plug the headlamps back in. I pulled everything apart as per his instructions, but when it came time to re-connect the plugs, I gave up after 45 minutes. It appeared to me that it couldn't be done, but I'm sure there's a trick he could share with us. As of this writing, the car's at a shop where I know they can complete my job. But what a drag, getting 2/3 of the way there and then not being able to figure out how to insert the plug! (The one that's nearly round, in particular.) I wonder what my bill is going to look like.
Now THIS is what I subbed for!
Only thing is, if I wanted to change the bulbs on my W220 side mirrors how would I go about doing so?
DONT WORRY RANDOM CITIZEN I'll BE POSTING THAT SOOOOOONNNNNN!
Julu great job really needed the info
Julu what about removing the Oem radio???
if I ever decide to replace the radio I for sure will! At the moment I have no reason to
if I ever decide to replace the radio I for sure will! At the moment I have no reason to
You have a video on how to fix the connector to the lights in the back my back break light ont light I changed it it must be a fuse or something electrical?? You have any input I know nothing about Mercedes cars.
My blinker don’t work neither
You did the rear right turn signal but what about the rear left turn signal?
It's pretty much the same thing which is why I left it out. However, on some cars for the rear left turn signal there should be a door which you can open to gain access to it pretty easily. Once you open that door the circuit board should be right in front of you. If this isn't enough feel free to DM me on my instagram. I can help you more from there.
What do I need to stop hyper flashing when replacing these old halogens with LEDS (turn signals/reverse lights)
you're going to need something like a anti-flicker module from amazon. They're fairly cheap around $20 but I'm not sure if they'll have a module compatible with the taillights. Typically they have them compatible with your front head lights
Bro my shi stuck asl old ahh car
Not necessary, just remove back covers, ez access!
Can you please provide more info on this option?
Please explain back covers removal to change bulb,