Dude modified a standard circ saw with a gas strut to make it plunge. Look around at his shop, diy bench dog clamps, diy table saw, diy plunge base for router, the list goes on and on. I tip my hat to you sir, i simply dont have the time to scratch build everything. You won yourself a subscriber. Next video will probably be a homebuilt battery drill ........
This is certainly one of the better DIY actual track systems I've seen on YT. The lock-unlock is great and the use of taped threads in wood saves time & money on threaded inserts
This is brilliant. By exposing the miter track on top of the guide instead of installing it, no compromise of cutting depth is made. While other methods require 3/4“ thick board, this one used 1/2 inch, and could have gone with something thinner if it were not for the bottom t track. Also it cracked me when this guy made sounds like ”좋아!”
This is one of the best videos of making a homemade track saw by far and a router what a fantastic job you did I'm totally in all of your workmanship but it's giving me a great idea I'm going to try this one myself it looks like it's going to be far more hard lasting and more accurate thank you great job look forward to seeing more of your stuff
That's a good idea, thanks. I always just use a straight edge but I've been trying to convince myself that I need a track saw just because I want it but this will definitely suffice
Shortening screws, I usually run a bunch of screws through a block of wood with their ends sticking out and use a disk or saw to cut them all at the same length. But this does require me dressing the ends after the cut
I paid very little for stuff like this readymade like in Germany or somewhere. I believe the sheet of high quality plywood alone is more expensive, was cool to watch though but kind of strange. Anyway thanks for sharing
Loved the router rail add on. We always built our own track saw. But I hung a lot of doors in Palm Beach the main use was cutting off the doors, had to be right. Got to say I did like your layout better.
Matias Lucena 03 de Setembro de 2022 já ativando o sino aqui do Brasil e como inscrito neste ótimo canal ,já assisti este vídeos várias vezes, o que é bom bom deve ser visto novamente, parabéns mais uma vez, DEUS abençoe toda família.
Very cool ideas. I'll definitely be stealing some of them. I think if you rub some paraffin wax inside the guide and along the guide rails, the saw will slide more smoothly.
Your excellent Tools, Workmanship, Skills are respectfuly appreciated. Your uploads gives an easy to follow the concept. Many will follow your jig designs. BUT for those not so skilled(myself included) wish you gave Dimensional plans. Be Blessed. Love from India
Why not use the wide saw blades to start and finish the groove cut? 2 cuts instead of 2 cuts with standard saw, then change to the wide saw and do 2 more cuts?
That's because my wide saw blade vibrates too much and doesn't create a straight, clean finish line. I worked like that because I wanted to create a precise groove.
@@carpentak ahh... thanks for the video it's very informative and I hope someday I can make mine too hahaha... but I am not master woodworking... trying hard and think a lot to make one for my personal use at home for emergency purposes. thanks for the reply and good bless.
@@yoyoyevardo5110 If you pay attention to safety and learn step-by-step, you will be able to make wonderful works for yourself someday. I wish you good health and happiness.
Bonjour, et merci pour le partage très intéressant. Simple curiosité pourquoi le bois est rouge? A t’il servi pour faire du vin rouge? Continue comme cela je ne regrette pas mon abonnement, car tu est très ingénieux. Jean
C'est un arbre appelé Purple Heart. Une fois fini avec de l'huile, la couleur du vin rouge ressort, et c'est joli, c'est donc mon bois préféré. Merci pour votre abonnement et votre intérêt.
![ILLSLICK X YOUNGOHM - We're The same [Official Video]](http://i.ytimg.com/vi/yUJNkobYR0E/mqdefault.jpg)
Dude modified a standard circ saw with a gas strut to make it plunge. Look around at his shop, diy bench dog clamps, diy table saw, diy plunge base for router, the list goes on and on. I tip my hat to you sir, i simply dont have the time to scratch build everything. You won yourself a subscriber. Next video will probably be a homebuilt battery drill ........
This is certainly one of the better DIY actual track systems I've seen on YT. The lock-unlock is great and the use of taped threads in wood saves time & money on threaded inserts
Sir I am astonished when watching you innovate and invent simultaneously! Thank you for sharing!
This is brilliant. By exposing the miter track on top of the guide instead of installing it, no compromise of cutting depth is made. While other methods require 3/4“ thick board, this one used 1/2 inch, and could have gone with something thinner if it were not for the bottom t track.
Also it cracked me when this guy made sounds like ”좋아!”
Thank you for your nice comments. You got the point exactly what I was thinking.
You say nothing. You are the easiest to understand! Got my sub on first video. Thank you.
OK, Yall are too smart and talented for me.... I can barely draw a line with a ruler.
For someone who can’t speak English you have an amazing way to communicate to us the subscribers. And your ideas and skills are amazing thanks 🙏
멋지네요~~영상 잘 봤습니다 또 오겠습니다!!
Absolute bliss... all those DeWalt tools... ❤❤❤
Wow if I had all that machinery I wouldn't need a track saw
좋아 😀 It is a D.I.Y. work of art. 짱
Excellent build.
สุดมากไอเดียบรรเจิด
this is exellent woodworkin job. congratulation!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
best track saw track EVER!!! and I will buy a track saw and track then...
Very good system. Thanks for sharing!
so many wonderful handmade devices/!!!!!
Я бы поставил лайк, если бы он под крутилки "открыть- закрыть" подложил пластиковые шайбы. Но я не такой, я всё равно ставлю лайк👍
So much creative idea and design. Thank you so much. Got some ideas from you to make my own track for my circular saw.
This is one of the best videos of making a homemade track saw by far and a router what a fantastic job you did I'm totally in all of your workmanship but it's giving me a great idea I'm going to try this one myself it looks like it's going to be far more hard lasting and more accurate thank you great job look forward to seeing more of your stuff
Punctuation is free..
Очень понравилась универсальность шины. Техника изготовления на высоком уровне! Удачи!
That's a good idea, thanks. I always just use a straight edge but I've been trying to convince myself that I need a track saw just because I want it but this will definitely suffice
Muchísimas gracias maestro 😘
Very nice video, thanks
Profesional skill and equip"s
You Sir ALWAYS have fantastic ideas and I am grateful you take the time to share them!
Bonjour Monsieur, j'espère que vous déposez des brevets pour vos superbes créations . Vous seriez un excellent voisin........
Bravos a vous.
That is good
Use rell for glasess
👍최고인듯....
GENIUS, what else can you say? Every one of his designs are inspiring. I wish I had time to build them all.
This man should work at NASA.
Amazing
Shortening screws, I usually run a bunch of screws through a block of wood with their ends sticking out and use a disk or saw to cut them all at the same length. But this does require me dressing the ends after the cut
I paid very little for stuff like this readymade like in Germany or somewhere. I believe the sheet of high quality plywood alone is more expensive, was cool to watch though but kind of strange. Anyway thanks for sharing
Loved the router rail add on. We always built our own track saw. But I hung a lot of doors in Palm Beach the main use was cutting off the doors, had to be right.
Got to say I did like your layout better.
음.. 좀 다른 게 아니구, 많이 다르네요... 따라하기엔 넘 어렵다는 단점이.. ㅎㅎ 훌륭합니다....
new subscriber here.great work of art.👏👏👏.
A lot of great ideas. Thank you
I hope your real job is building space rockets. Master craftsman.
Quá tuyệt vời
🇧🇷 Bom dia! Belíssimo trabalho. Abraços.
perfect and percien
Vraiment beau travail merci beaucoup pour la vidéo
Part of your excellent results must come from the ‘love pat’ that the components receive throughout the process.
Brilliant!
Muito bom👏👏👏👏💯👍✌️
muito top show de mais muito
man i wish i have the table to make those track groove..
Super 👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Matias Lucena 03 de Setembro de 2022 já ativando o sino aqui do Brasil e como inscrito neste ótimo canal ,já assisti este vídeos várias vezes, o que é bom bom deve ser visto novamente, parabéns mais uma vez, DEUS abençoe toda família.
If only I had a table saw setup.
Keren luar biasa👍
Great Job 👍
정말 깔끔하고 사용에 최적으로 만드시네요. 구독 좋아요 누르고 갑니다.
감사합니다. 좋은 영상으로 또 뵙겠습니다. ^^
amazing thanx
impressive
예술이네요
WOW! Very well thought out. Looks a bit labor-intensive/time-consuming, but looks like it was well worth the efforts. Thank you for sharing! Aloha
No tak, ale żeby zrobić taką prowadnicę trzeba mieć piłę stołową. Jakbym miał piłę stołową nie musiałbym miec takiej prowadnicy :)
Why I quit technical woodworking and stick to simpler things. I DON'T HAVE SPARE TIME and I'm way beyond that as production.
Nice Video!!!
OK!!!😂😂
Very cool ideas. I'll definitely be stealing some of them. I think if you rub some paraffin wax inside the guide and along the guide rails, the saw will slide more smoothly.
That's a good tip. thank you
Very good! ❤
Wish you 50 K subscribers very soon.
Thank you!!
Wow.. Amazing.. You have a new subscriber
超級高手
좋아 ㅎㅎ
Your excellent Tools, Workmanship, Skills are respectfuly appreciated.
Your uploads gives an easy to follow the concept.
Many will follow your jig designs.
BUT for those not so skilled(myself included) wish you gave Dimensional plans.
Be Blessed.
Love from India
Thank you for your valuable comments. I can't give plans to my designs right now, but I will work harder and do it someday.
@@carpentak
.....that day and onwards it will be a great generous gesture.....Hope I will be able to enjoy them.
All the best wishes. Keep going......
Excelente 💯👍🏻👍🏻👍🏻
Having a cut more than 90% of the way through the plywood hoe long will it be until it snaps off or loosens
Mon dieu! I've not seen a table saw like that before...
Nice job as you did before! 😃 Thumbs up.
thank you my friend!
Thx for sharing but no, because sliding wood on aluminum is not smooth enough imho
I apply wax. Then it's slippery enough. thanks
My wife use wax too …
I love this saw guide. Is there a way you could do a parts list? If you could, please also include a link to where to get the rails.
A link to point you to is in the description. Others have no links. There are plenty if you search for 30mm t-tracks.
Thank you.
woow amazing
applausi!
보자마자 구독 누르고 갑니다.
다른 영상도 봤는데 진짜 대단한 분이네요.
저는 집에서 취미로 목공하는 사람인데 앞으로 자주 오겠습니다.
감사합니다. ^^
감사합니다.~ 제 채널에 자주 와주세요. 앞으로도 보여드릴게 많습니다. 그럼 많은 성원 부탁드리고 행복한 취목생활 하세요.
구독 알람 설정 합니다 아이디어가 아주 훌륭하십니다.
네 감사드립니다.!!
Good job
Круто!
Fabulous job!
엄지척
Ecxelente.
Excelente , parabéns! 🇧🇷
공구 몇개를 사야 하는 건가요? ㅠ.ㅠ
그냥 안 좋아도 시중에 파는 거 사서 쓸게요 ㅠ.ㅠ
너무 어려워요 ㅠ.ㅠ
👏👌👍🔥
🔥👍🤝✌️
Why not use the wide saw blades to start and finish the groove cut? 2 cuts instead of 2 cuts with standard saw, then change to the wide saw and do 2 more cuts?
That's because my wide saw blade vibrates too much and doesn't create a straight, clean finish line. I worked like that because I wanted to create a precise groove.
Hi Sir, how can make order for Guide Rail for Circular Saw only
hello. I don't sell. I only make one of mine.
@@carpentak ahh... thanks for the video it's very informative and I hope someday I can make mine too hahaha... but I am not master woodworking... trying hard and think a lot to make one for my personal use at home for emergency purposes. thanks for the reply and good bless.
@@yoyoyevardo5110 If you pay attention to safety and learn step-by-step, you will be able to make wonderful works for yourself someday. I wish you good health and happiness.
muito top
Did you work on the James Webb Space Telescope by any chance? This is the work of a true master.
виртуозно
How did you do the fence for table saw? I am interested
I have that video on my channel
@@carpentak thank you 😊
👍👍🇧🇷
영상 잘보고 있습니다~
원형톱 가이드로는 최고네요
7492옆에 있는건 원형톱에 다도날을 장착하신 건가요?
네 감사합니다. 옆에 원형톱에 달린건 8mm 두께의 톱날입니다. 정교톱에서 구입했습니다. 더 두꺼운 날도 있지만 일반 원형톱에는 8mm까지만 물릴 수 있습니다.
I wish I could find a tutorial for a mini saw cutting guide 😞
AAAAAAA!!!! Cheating again!!! Making smaller T-treck from bigger.😆 I`ll use that for making T-rack for Makita😉
Bonjour, et merci pour le partage très intéressant. Simple curiosité pourquoi le bois est rouge? A t’il servi pour faire du vin rouge? Continue comme cela je ne regrette pas mon abonnement, car tu est très ingénieux.
Jean
C'est un arbre appelé Purple Heart. Une fois fini avec de l'huile, la couleur du vin rouge ressort, et c'est joli, c'est donc mon bois préféré. Merci pour votre abonnement et votre intérêt.
As much as I liked watching this video. He does know that wood swells and shrinks. Just saying!
멋진 조기대예요^^ 혹시 조기대 두개 연결시키는 연결브라켓은 이름이 어떻게 되나요???
감사합니다. 알루미늄스틱은 제가 만든거구요. 황동핀 말씀하신거면 그건 우드빈에서 팝니다. 이름은 기억이 안나네요
아쉽게 지금은 판매를 안하나봐요. ㅠㅠ 답변감사드립니다. 그런데 알리에서 찾았네요^^
@@junescraft 혹시 알리에서 찾으신 링크나 이름 알려주실수 있나요?