I have some questions, I would be so thankful if you could answer them in your next video: 1- Can u perform great by claw gripping this mouse? or more precisely, aggressive claw? 2- can u compare it to the xtrfy M42, since the major difference is the back hump? (using the higher hump on the M42) 3- between arm aiming & wrist aiming, what do u find yourself using more and being more accurate with while using this mouse? Lots of thanks in advance mate, your honest opinions are well appreciated. Keep on the great work mate.
Had the same issue with two phantoms I bought..had to send them in for repair right out of the box. My Poseidon was a bit better but had this annoying issue with the side clicks where they had too much post play and would make a high pitch squeak. This tenz model is 1000% better. My copy, I am happy to report has no issues at all.
i saw a lot of people talking about qc issues but luckily my mouse doesnt have any creaking when squeezing the walls and i didnt have that thing where it clicks when you push down the back shell
THIS IS SUCH A SMALL ISSUE. you will never apply that amount of pressure on the back of the mouse during gameplay. i would rather have a lighter mouse over a mouse i can sit on without breaking.
the moment you talked about the costumer support , my interest imediatly faded away, im not going to support such thing ; i guess i'll go for the deathadder v3 or the atlantis
Does the stripe give a glossy feeling? Definitely do a deep dive on the new infinity skins - compared to the previous infinity skins on the UL2, and compared to traditional griptape like BTL/corepads etc.
i got mine today. it sadly had the stick click due to the mylar adhesive not being on correctly. i took the mouse apart super simple (T5 screwdriver) got my tweezers fixed the adhesive. got alcohol and cleaned the hook ok the clicker and were the adhesive is wrapped and it fixed my problem. takes less than 5 minutes. super simple, hope this helps anyone. ( i also searched up on youtube how to disassemble helped a lot)
How does the coating on the mouse feel? The phantom felt very smooth while the Poseidon felt hella dry, almost like dry paint on a wall kind of feeling
without the grips is the coating more grippy than the previous mice such as the phantom? the problem I've had with the phantom is its super slippery with dry hands
That is more or less subjective. But if you want data: The GPX has I think roughly 2ms faster polling and is roughly 100$ cheaper (saw it going for around 105$ on Amazon recently) Starlight is roughly 20 grams lighter. I have used both pretty extensively and in terms of value the GPX, Atlantis, Pulsar is VERY much better. I personally main the Starlight 12 Poseidon Med. because I have a small palm, but long fingers so it fits my hand better. Again it's up to you though. Data wise the GPX is better
If you had to choose between this mouse and the gpro wireless mouse which would you prefer just your opinion. I got the tenZ small one but tbh after seeing some people sell them online for $300 to even $500 for this mouse unopened and after seeing some issues people have on reddit; it's making me want to sell it for a gpro wireless or something.
@@ChadAltDelete A knife collector too!? That seals the deal, you're my favorite reviewer for sure. And the bugout is so nice! Weighs nothing and a fidget monster. I've been carrying around the Kizer Cormorant lately, and it's a stellar knife for the price.
@@Hans_Lollo you need to imply a massive amount of force on the back of the mouse to make it click, so much so that u can break the PCB. this will never be an issue while using the mouse. i would rather have a lighter mouse over a mouse u can sit on without breaking
@@linoromero615 Turn the mouse off, then hold buttons one, two and the back side button while turning it on. To put it back to stock LOD, do the same but hold the front side button instead of the back.
i really wanted to get one of those but ffs fighting with bots for a mouse and the stupid prices... gratz on getting one that looks like is 100%, at least the encoder doesnt look like it's bent to a side
Full review is coming later. If you have any questions, leave them down here ⬇
I have some questions, I would be so thankful if you could answer them in your next video:
1- Can u perform great by claw gripping this mouse? or more precisely, aggressive claw?
2- can u compare it to the xtrfy M42, since the major difference is the back hump? (using the higher hump on the M42)
3- between arm aiming & wrist aiming, what do u find yourself using more and being more accurate with while using this mouse?
Lots of thanks in advance mate, your honest opinions are well appreciated.
Keep on the great work mate.
Glad to hear the QC is better. Thanks for the impressions.
Can't wait for the full review!
Mine is arriving tomorrow, looks great and I'm glad you got a good copy!
Hope you get a good one too!
@@ChadAltDelete QC is mint on my copy 😎
@@_paczki Nice dude!
Great video man, your chan looks promising keep doing your stuff.
Thx dude 👊
Best of luck this time! Thank you for always sharing your true experiences and journey. It is INDEED helpful. Cheers!
Thanks man. Appreciate that!
Good to hear you got a good copy, excited for the full review!
Excited for this, how does an unboxing video look this clean? Glad you finally got a decent copy, utter shame it took this much money and time.
ive had nothing but the best mice from them, I think i have 11 or 12. awesome to see this is good too. cant wait for my Medium!
Glad you have had better luck than me lol. I'm sure you will love this one!
Another great video. Nice shots of the mouse!
Had the same issue with two phantoms I bought..had to send them in for repair right out of the box. My Poseidon was a bit better but had this annoying issue with the side clicks where they had too much post play and would make a high pitch squeak.
This tenz model is 1000% better. My copy, I am happy to report has no issues at all.
It seems like they may have stepped up their QC game, finally...
i saw a lot of people talking about qc issues but luckily my mouse doesnt have any creaking when squeezing the walls and i didnt have that thing where it clicks when you push down the back shell
its so bad, some have ghost wheel, and stick clicks etc, finalmeme is back at it again
Will come over time as you use the mouse and screws get lose, youll notice but its possible to fix
THIS IS SUCH A SMALL ISSUE. you will never apply that amount of pressure on the back of the mouse during gameplay. i would rather have a lighter mouse over a mouse i can sit on without breaking.
@@nexty--- u dumb??? theres been multiple videos of people barely adding any opressure and it creaks
the moment you talked about the costumer support , my interest imediatly faded away, im not going to support such thing ; i guess i'll go for the deathadder v3 or the atlantis
Lamzu is a really good company so if I wasn't getting this mouse I would've gotten the Atlantis
Thank the QC gods on this one!
Exactly!
its so bad, some have ghost wheel, and stick clicks etc, finalmeme is back at it again
Does the stripe give a glossy feeling? Definitely do a deep dive on the new infinity skins - compared to the previous infinity skins on the UL2, and compared to traditional griptape like BTL/corepads etc.
yeah it has a glossy feel and i tried the skins but theres a lip when you put them on so i dont like how they feel on my palm
i got mine today. it sadly had the stick click due to the mylar adhesive not being on correctly. i took the mouse apart super simple (T5 screwdriver) got my tweezers fixed the adhesive. got alcohol and cleaned the hook ok the clicker and were the adhesive is wrapped and it fixed my problem. takes less than 5 minutes. super simple, hope this helps anyone. ( i also searched up on youtube how to disassemble helped a lot)
Thanks for the feedback. Hopefully this can help someone else who might have the same issue🏆
How does the coating on the mouse feel? The phantom felt very smooth while the Poseidon felt hella dry, almost like dry paint on a wall kind of feeling
without the grips is the coating more grippy than the previous mice such as the phantom? the problem I've had with the phantom is its super slippery with dry hands
this batch probably has their best qc out of every other release
Absolutely 💯
Been using this mouse for like 3 days so far I love it, feels like I'm using a Star Wars mouse lmao.
Haha that's dope.
can you try the infinity skins?
I definitely will for the review!
Hmm.... In this day and age glad we have a lot of choices in mice...
This vs Logitech g pro x super light
That is more or less subjective. But if you want data: The GPX has I think roughly 2ms faster polling and is roughly 100$ cheaper (saw it going for around 105$ on Amazon recently) Starlight is roughly 20 grams lighter. I have used both pretty extensively and in terms of value the GPX, Atlantis, Pulsar is VERY much better. I personally main the Starlight 12 Poseidon Med. because I have a small palm, but long fingers so it fits my hand better. Again it's up to you though. Data wise the GPX is better
If you had to choose between this mouse and the gpro wireless mouse which would you prefer just your opinion. I got the tenZ small one but tbh after seeing some people sell them online for $300 to even $500 for this mouse unopened and after seeing some issues people have on reddit; it's making me want to sell it for a gpro wireless or something.
Gpro wireless is a safer bet in almost all respects. If you had to do one ot the other, I'd say gpro.
The mouse is pretty nice, but that BM Bugout is nicer
It's my favorite knife out of my entire collection. It weighs nothing!
@@ChadAltDelete A knife collector too!? That seals the deal, you're my favorite reviewer for sure. And the bugout is so nice! Weighs nothing and a fidget monster. I've been carrying around the Kizer Cormorant lately, and it's a stellar knife for the price.
I've seen a vid where a guy could activate M1 and M2 by pressing on the shell behind the main mousclicks.
its so bad, some have ghost wheel, and stick clicks etc, finalmeme is back at it again
@@KevinGonzalez-qx3tj Imagine paying 300 bucks for mouse which is a absolute trashcan
@@Hans_Lollo you need to imply a massive amount of force on the back of the mouse to make it click, so much so that u can break the PCB. this will never be an issue while using the mouse. i would rather have a lighter mouse over a mouse u can sit on without breaking
What are the dimensions and what sensor is it running?
Can you reuse the skins?
is the shape the same compared to the phantom?
Yep
My small Tenz mouse has skipping issues with the sensor… like how tf
Like I have a medium phantom and it doesn’t do that…
@@linoromero615 Bummer, my first SL12 had that issue. the LOD was weird and caused skipping. Have you tried the other LOD?
@@ChadAltDelete no lol how do I switch iy
It*
@@linoromero615 Turn the mouse off, then hold buttons one, two and the back side button while turning it on. To put it back to stock LOD, do the same but hold the front side button instead of the back.
i really wanted to get one of those but ffs fighting with bots for a mouse and the stupid prices... gratz on getting one that looks like is 100%, at least the encoder doesnt look like it's bent to a side
The smalls were up for hours, you could have got one if you tried.
@@tatujEEE ["... and the stupid prices..."]
@@johannfindeis4421 your first argument was still a non-issue
professional , see ya!,
Why are you paying $300 for them lmao, they $189 king
This video is old. They were 300 when it was brand new.
Finalmouse is such trash, just as a company. No way I'd buy another mouse from them.
I laugh at people buying from FinalMouse company. So funny :D