Toyota Highlander Door Trim Sticking Out/Door Popping
ฝัง
- เผยแพร่เมื่อ 29 ธ.ค. 2020
- This video shows the replacement of clips on the bottom door trim of the 2011 Toyota Highlander. If the clips don't hold the trim, it can stick out from the door causing the door to pop when it is opened.
- ยานยนต์และพาหนะ
![เจ้าผู้เดียว - ดิด คิตตี้ [OFFICIAL MV]](http://i.ytimg.com/vi/q0NLCYKBOTo/mqdefault.jpg)
This is exactly the video i was looking for! Thanks a bunch!
Glad to hear it!
Good video. Hopefully that’s a good fix for the long term. 👍👍
I hope so too
That's the cats ass my friend. Excellent. This was exactly what i was looking for same year same colour even same wobbly rubber weather seal at bottom of door from undercoating. Long live the Highlander. Has your stereo screen gone black yet? Just had REAR a/c line capped off because it leaked. Still have front AC again. Perfect. Thanks again
👍👍 my stereo screen is still ok. Ac ok for now. My current issues are a drivetrain shudder on acceleration and a water leak on the bottom passenger side of the windshield
Shudder, probably the drive shaft- ridiculously expensive at the dealer. Two other options rock auto, but the least expensive is to pop it off and rebuild it at your local driveline shop @ $400-500 cdn. Is it leaking at the window, or is it at the sunroof? My sunroof drain plug on the driver's side was plugged. Water came in on the roof liner, down the A-pillar and the floor. I also had a weather strip around the rear hatch opening glass expand (reaction to undercoat), so i had to reglue and take an inch out - the centre of the bottom (also made it easier to reinstall)
Good tip about the sunroof drain. I’ll have to check that first. Thanks. I’ll also check out a driveline shop to see what they say. I had the hatch power lift pull out from the door a couple times too. Finally welded in a big chunk of steel for the ball stud.
What size is that bolt
Not sure, just used the same one that was there