Homemade Exhaust MUFFLER For 10$
ฝัง
- เผยแพร่เมื่อ 23 พ.ย. 2017
- If I have helped you and if you liked this creative video sure to subscribe and like the video;) I'd much helped me ...;)
INSTAGRAM : / doctords17
...
Ako sam vam imalo pomogao i ako vam se svidio ovaj kreativni video obavezno se pretplatite i lajkujte video ;) PUNO BIH MI POMOGLI... ;) - ยานยนต์และพาหนะ
For all the people that bash him for his work at least he made an attempt to use his skills. Im always impressed when someone decides to tackle a project with their own ideas its great. The only thing different i would of done is make a removable end cap so i can repack the muffler when all the fiberglass blows out.
I have lots of old muffler bodies from previous atvs that i owned and will be making my own glasspack muffler for my grizzly 700. After spending tons of money on go fast parts for my previous grizzly 700 im taking it one step further and doing a budget build on this one and the less money i have to spend to make it perform better and be unique i will do the work myself. I always encourage people to do projects like this it keeps your mind busy and keeps you out of trouble. When i see young teens doing builds i tell them to keep up the good work.
Don't let them beat you down, finding a solution and making that happen with what you have is what makes you a man. God bless you for not taking the easy way out!
Thank you, my brother
I see a lot of negative in the comments, I'll say your welding skills have room for improvement, however if you are self taught bravo! As far as the comments saying you could just buy one, well sure, but they will never be routed how you want them, and some of us have a much larger scrap pile than we do thick wallets, sometimes the life you make at home outweighs the all mighty dollar, I chose to raise my children for example. I do more diy than anyone I know, fab my own car parts ect, if you have some skill and imagination you can save a ton of money, don't let these folks push you around, at least you are doing something constructive with your time.
Andrew Savage Well said ! I agree 💯 I don’t know why people don’t see the positive first !
Instablaster
Actually one of the best sounding exhausts I've heard especially for such a small engine.
Well done mate, great job 👌
Good project, thanks for sharing :)
not bad but the glass wool will fly out in like 3 days, you should wrap the pipe with wire mesh before putting the wool and then it will last lot longer amd always rivet 1 side for future refilling and fixing
great video...i love these workshops.
i wish i had one to build and make all kind of cool.things
Odlicno uradjeno!!!!!!
It's a great learning experience for the kid. I commend him on his efforts. Not many of you other commenters could have made a muffler. But I do agree to a point. It didn't make that thing sound any better.
Ran across your vid while researching how to make one for wife's quad, it's so old that cannot get one .just want to respond to some of the negative comments. If you have the time and tools to DIY , and you want to make it , then why not. Better than being a couch potato. If you make a rough looking weld , and it holds up ,what the heck . Seen some perfect looking welds that didn't last long enough to install. I am not going with a glass pack , but some type of baffling in stainless. Agree with the guys who say you need practice, but it will come
Les Gallivants I couldn’t agree more all the internet warriors want to say this or that but he’s out doing something!
Hit that nail RIGHT on the head. 👌 Everyone started somewhere, and that's as a beginner. Never met anyone who was a master craftsman, expert, professional, etc straight out of the gate. Naturally talented/gifted, sure. But some things only come with time and experience.
Nice sounding little glasspack...great job.
Tnx ;)
Watching you work is like watching an artist making a painting, keep doing the good work 👍 greetings from Pakistan
Tnx
Ty sir. Beautiful work!!! No shit,beautiful.
Here comes Johnny with his grinder in his hand, hes a one glove man, and hes off to the rodeo🤣🤣🤣
I definitely commend you on the effort and creativity
Thank you for sharing! This video is damn good!
Why do so many people press dislike? What's wrong with them?
love that muffler's sound
Nicee, me to :D
I made a bigger version of this for my car.... thanks for the tutorial !! Saved me ₹8000
Interesting, yes a lot of work, but evidently he enjoyed building this Muffler and that how you learn your skills. Not by going to the store and buying a muffler. I think the long exhaust pipe could be reduced to eliminate a lot of the noise before it gets to the muffler. A great job, just imagine if he had a MIG welder.👍
your right buddy it does LOOK like a muffler ! lol, never give up on a project
Whoa!.. excellent sound. nice work.👍👍👍
Tnx
Good job, worked well. Nicely braced. 👍
You did well, Moleque !! Show !!
Zo sweet of a sound bro.
Tks
Overall, good job. However, saying it costs $10 is a bit misleading. Perhaps saying "Made from Scrap Metal" would be more correct. It is by far cheaper than a prefab one, tho.
The master !
Nice one
Wow..nice...
i love it !
The pipes alone are well over $10
Wow, Good Broo l like 👍👍👍👍👍👏👏👏👏👏
Outstanding
Nice job
You inspire me to make one of my own!
good luck kid, sounded great
Great video dude
Loved you. 😄😄😄😄
Great job man that looks Toni Roni to me.
Sounds unique...nice
Tnx ;)
Nice! I even liked the music for a change.
Tnx dudeee ;)
👍👌 extra
what a grrat talent you have.keep safe.
Very cool man! You're making it look really simple, but I'm sure there's some real hard work involved!
Tnx broo. Yeahh :D
GREAT WORK!
Holger Kretzschmar Tnx dudee😚😁
I love the fact that you made instead of buying it
Manual sekali ya... Yg penting hasil nya mbantappppp......
It amazes me what people pay for a stainless cylinder packed with some fiberglass. All these different companies basically make the same thing for big $$$
cool part 2
Sounds like a mower you essentially made a glass pack you should of put a screwdriver in the holes you drill on the innner pipe and bent them to direct exhaust to your muffler packing makes for a way better sound
Great job though 👍
Woww
Very inspiring. You are a genius. Keep it up
iyk moses its literally the same design as a gun silencer lol
Wow! Super video !
Hvala tiiii :D ;)
NICE experiment. 👍🏼👍🏼👍🏼 I’ll use scrap metal from HVAC ducts.
Good work well done
Tnx dudee ;)
Will this fit on my 1998 honda?
Very good. Thank you.
Someone buy this man some hole saw bits!
after seeing all this work,i'll buy one...
this is great but I am from Croatia so we are very far away ;)
Dude that's sweet!
Women interested in these things are worth gold. Hopefully women get more and more interested in these subjects! :)
That exhaust sounds pretty *DaNkBOosTeD*
Tnxx brooo ;)
Doctor D.S. laku noc
haha i tebi care ;)
Fits the go cart build good job.
yeahh ;)
Nice
Good Work. Keep Going never Stop.
Amazing sound 😍
Tnx brooo ;)
For $10 + the equiptment + labor + the knowlague to do it = how much?....
fr...
Good luck to everyone who tries to make things. People fail way more than they succeed, so never give up, and one day, you will be able to create what you dream of today.
👍
Pree dobarrr je!😀
heheh
Nice job...
Tnx ;)
Sounds good
bravo!!! :D
Tnx ;)
Top
Very goob Job
good jon
Like if you missed the comparidon of how it would sound normally, *WITHOUT* the muffler, for the sake of comparison!
At 6:30 you needed to lay down screen material between the packing and your core pipe, as it will blow out by blowing in thru your holes.
Also, with all that work you ended up with a one-chamber muffler . . . you had room for 3 chambers.
Thanks for the advice
;) :D
That sounds like a v8 you're onto something there lol
Good job dude.
Nice work. It would have been better to hear what the stock muffler sounded like for comparison. You don't mention anything about if it was actually an improvement, or if it was the sound you were looking for. thanks
nice man 🙇🙋
Tnx
All that labor makes me want to buy a fake Akra from AliExpress. ;-P
Somebody buy this man a MIG welder !!!
We work with what we have.... Probably one of his next buy... ;)
A MIG welder, and a hole saw..
Mandou bem Moleque!! Show !!
;)
Be careful with leaks on the welds
👍👌
Nice!
Tnxx broooo :D
Doctor D.S. I was like "what is he gonna put that sucker on"? But when I saw I was like "Hahaaaaa tight"!
Hehehe 👌👌👌👌
You inspire me to buy one... How many man hours?
Odlican posao.Moram i ja napraviti sebi jedan za pit bike ;)
Marino 125 Hvala tiii😘😘isplatit ce ti se a i jeftino je😁
Well done boy
Tnx ;)
Lots of work, but good job!
Ever hear of that new invention called a hole saw?
?
xd
Good job.
Perfetch
Tnx ;)
I like it..
Tnx
Hey, nice job dude. Haters gonna hate, but you had the ambition to get off your butt and MAKE something from scratch. Well done in my book for the try alone. Subbed.
great video
Tnx broo ;)
tq so much for making this video
Not bad, very nice sound
nice, you alternately can use steel conduct and fill it with sand and heat it to bend it, it won't be a real mandrel bend but look and preform a lot better than heavy pipe you used.
Thanks for the advice;)