How To Install AN-6 Fittings To Your Fuel Rail, LS SWAP AN FITTINGS FOR FUEL LINE
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- On todays video I will be showing you how to install AN fittings on to your fuel rail for your LS swap car or truck, in this video I will show you two different types of AN fittings you can use for your fuel system.
AN fittings not only add great style to your project they can add more safety and more customization when it comes to your hose choice and fuel line size.
If you enjoyed this video be sure to drop a like and leave a comment I enjoy hearing from everyone, don't forget to show your support for my channel by smashing that subscribe button!
Im glad you did a video on this part of an fittings.
Happy the video was helpful, thanks for watching
Man you have helped me so much. thank you.
Welcome, happy the video helped
Im about to need this thanks a lot!
Thanks for watching
Great info, thanks
Welcome
Thank you. Great information.. Do you have part number or links ?
Sorry, no, if its not in the deception
Will it hold a 425 pump on a silverado with cams ?
well the pump is regulated, but I have not had any issues with them, and I run a reg pump with cam
never use compression fittings on vehicke, the vibration will couse a leak, use flare fittings.
👏🏻👏🏻
😀
Hello!
According to the technical specifications it supports up to 72 psi. Have you tried it in vehicles with more than 80 psi of gasoline pressure?
Thank you!
well the regulator for a LS is around 60 psi
Do you have a part no for the o ring style fitting or the exactly name of it?
EVIL ENERGY 6AN Male To 3/8" Quick-Disconnect Female EFI Fitting Aluminum look that up on amazon
Hey I’ve been trying to look up but I can’t find it , any one know what the max hp these stock fuel rails can handle?
rails really don't matter much when it comes down to it, its a pressure system, with a return on the fuel filter, what matters is injector size and injector timings in the tune, people make 1200 hp boosted on stock intakes everyday, but that's my opinion, others may disagree
Stock fuel rails will handle easily over 1,000 hp depending on injector pounds per hour.
Why not just use a quick connect AN fitting??
You could, just depends on what way you wanna go