So far we’ve liked it. I’m glad I didn’t get a smaller one. It’s been able to do what I needed it to but I have found it’s limit. An IBC tote of water weighs considerably more then I thought lol. Good luck on your search and enjoy that AC and heat 😁
I didn't get a hat!!! Or a Sticker!!! ;-) if you do any kind of angled grading I would suggest getting a tilt cylinder for the rear implement, you already have the remote for it, if you need to grade any kind of angle or ditch it's a game changer. Mine came from Amazon 225...ish I'm glad you had a good experience with the purchase
Great advice. I’ve got one remote back there and that’s tied up with my hydraulic top link but I’ll definitely keep that in mind for the future. Thanks for your suggestion on smiths, I wouldn’t of ended up there without your recommendation. As for the hat and sticker you must of bought yours before they did the buy a 20-40k hat get a free tractor deal 😂
thank you for sharing you experience I am in the market for a tractor and I'm working with them they've been great so far great prices for a great tractor
Always ground everything when you shut down. You shouldn’t have left teh loader in the air. Comment on Smiths: They are one of the few places you can download the manuals for the older tractors. Smiths had the foresight to make copies of all the manuals for the older tractors, when TYM was revamping their webpage. Smiths is one of the few places you can get manuals for free. And TYM is one of the largest manufacturers of tractors in the world with a large presence in Asia and Europe.
Yes when you shut off your tractor, lower the loader and any three point equipment to the ground. With the hydraulic system holding things suspended there is a lot of stress on seals and O rings. eventually those will fail and start to leak. My dad always stressed this to me growing up. Our local dealer mechanics stressed it to me as well.
Just a "Way-Kool" Tractor. You Sir, just didn't start with a "little-tinker-toy". Have two just about this size, sometimes TOO BIG. Another unit halve this size would be a BIG Help to the "Spread"; perhaps a 25hp rig ( like 2500-3000lb unit). Thank you Sir for the Excelent vidio and happy safe tractoring. Best wishes with all your endeavours.
@@doubleahomestead7794 Now "YER" on the "Right-tract". Incedently: is your present tractor a "gear-drive or a "hydro-slack-o-matic "? Presently have TWO gear drives, a shuttle-shift(54hp),a power-shuttle ( 36hp) and a 21hp 3range hydro-slack-o-matic. Like the Power-shuttle the best but very expensive. Looking to get into a tym 2515-3515 Shuttle-shift to "accent the fleet". Remember: ONE Tractor-can't "DO it ALL" !!!
@@donaldstrishock3923 this one is a hydrostat. We don’t have much in terms of fields so I don’t need to maintain the same speeds for long periods of time. The HST made the most sense for us. Our lawn tractor is also an hst. Idk if they still make ones that aren’t. Definitely give Sean a call at smiths. Tell him I sent you and he will get you a good deal. I’ve had some questions for him since and even had something shipped to me. I get my questions answered typically within minutes if I text him.
@@doubleahomestead7794 Thanks "fer" the "re-feral". Have a TYM-Branson Dealer 9 miles away up here in North-East Ohio. As fer "gear-drive's" ; have 3 Wheelhorse's in 6×2 ; just can't STOP them. With 3 more in the hydro-slack-o-matic configuration, they burn 38% more fuel to get the same "Werk-Dun"( always jimming with the go-leaver). As fer the "Big Trak-tors" go (anthing over 2000lbs) the Hydro-slack-o-matic's are the "Dream-boat" selling feature to the "hobby-farmer" & "Home-lowners": reason# 1 they are SO Cheep to manufacturer& command a Premium Price for the "Novice-convenience" Consumer; The Dealers "make" DOUBLE the upgrade price difference to a Gear-drive ( same exact model& cheeper to manufacturer). With 40% of the Hydrostatic's power going out the Exhaust pipe & tranfered to the "hydro-slack-o-matic's" transfer-case as Unusable Heat & a VERY deficient amount of "Go-power" to the wheels; like almost 60% LESS in reality.( they are NOT Desighned like Bulldozer Transmissions). Happy safe tractoring, and best wishes with all your endeavours.
How much time has it spent broken down? I have a 574. It stays in the shop broken down matter of fact it’s in the shop right now the AC has gone out under 450 hours front axles went out at around 200 hrs it’s been one thing after another
@@matthewmilam286 so far. 0 minutes. Theres a guy on fb that has a knuckle kit to help the axles. Perhaps it would be worth looking into that. I’ve only got 140 hours on it though so we shall see what the future holds.
Really wasn't trying to be negative, just trying to educate being I work around heavy equipment and have seen way too many people getting hurt not wearing proper ppe
Thank you I believe TYM (kukje) have a contract to build them for another 6 years. They seem like solid setups and I assume they will use a lot of the same parts as Branson so will likely have decent parts support. Just try to find what the branson(TYM) crossover model would be for future reference. Best of luck on your tractor purchase and once you decide, enjoy it 😁
Translates to about 21k in the states not including the 15 percent taxes. Yikes!!! I got a really good deal through smiths on mine. No one else was able to come close. Just ordered my filters through them for my 50 hour which I have to do this weekend. Every experience has been top notch. How are you liking the 25hp tractor?
Sean threw it in with the package deal for me. So it came from smiths enterprise. Where they got it from I’m not sure. If you call them they should be able to ship you the right one. Keep in mind if you plan on going to a quick hitch at some point let them know about that.
There’s a lot of people that have no issues with these tractors. While doing research I found complaints across the board with all companies and it remained pretty consistent. This tractor is a TYM not a Branson. I know Branson is now TYM though. But thank you, so far it’s been great up to 50 hours.
![ตีสิบเดย์ [FULL] | เปิดใจ "อาจารย์ เบียร์ ฅนตื่นธรรม" นักสนทนาธรรมสายดุดัน!](http://i.ytimg.com/vi/vqaBI_mnoDk/mqdefault.jpg)
That's a good sized tractor....we are looking at them in the cab version. Tractor Hard! 🚜💪!
So far we’ve liked it. I’m glad I didn’t get a smaller one. It’s been able to do what I needed it to but I have found it’s limit. An IBC tote of water weighs considerably more then I thought lol.
Good luck on your search and enjoy that AC and heat 😁
I didn't get a hat!!! Or a Sticker!!! ;-) if you do any kind of angled grading I would suggest getting a tilt cylinder for the rear implement, you already have the remote for it, if you need to grade any kind of angle or ditch it's a game changer. Mine came from Amazon 225...ish I'm glad you had a good experience with the purchase
Great advice. I’ve got one remote back there and that’s tied up with my hydraulic top link but I’ll definitely keep that in mind for the future.
Thanks for your suggestion on smiths, I wouldn’t of ended up there without your recommendation.
As for the hat and sticker you must of bought yours before they did the buy a 20-40k hat get a free tractor deal 😂
TYM purchased Kukje. Branson was the brand name Kukje used to sell tractors in the US.
Correct.
thank you for sharing you experience I am in the market for a tractor and I'm working with them they've been great so far great prices for a great tractor
They are great people to work with. Before and after the sale
LS makes a better tractor from what I hear. I’ve had had nothing but problems out of my tym 574
@@matthewmilam286 that’s too bad. LS seem to be great tractors. So far I’ve been happy with my 474. Hope it stays that way.
Always ground everything when you shut down. You shouldn’t have left teh loader in the air.
Comment on Smiths: They are one of the few places you can download the manuals for the older tractors. Smiths had the foresight to make copies of all the manuals for the older tractors, when TYM was revamping their webpage. Smiths is one of the few places you can get manuals for free.
And TYM is one of the largest manufacturers of tractors in the world with a large presence in Asia and Europe.
Thanks for the feedback. Tractor was shut off for maybe 15 minutes but I hear you on the safety side of it.
Yes when you shut off your tractor, lower the loader and any three point equipment to the ground. With the hydraulic system holding things suspended there is a lot of stress on seals and O rings. eventually those will fail and start to leak. My dad always stressed this to me growing up. Our local dealer mechanics stressed it to me as well.
Just a "Way-Kool" Tractor. You Sir, just didn't start with a "little-tinker-toy". Have two just about this size, sometimes TOO BIG. Another unit halve this size would be a BIG Help to the "Spread"; perhaps a 25hp rig ( like 2500-3000lb unit). Thank you Sir for the Excelent vidio and happy safe tractoring. Best wishes with all your endeavours.
I would love more tractors. I’ll see if Alicia is on board. Maybe I’ll say it’s a his and her tractor, that might work 😂😂
@@doubleahomestead7794 Now "YER" on the "Right-tract". Incedently: is your present tractor a "gear-drive or a "hydro-slack-o-matic "? Presently have TWO gear drives, a shuttle-shift(54hp),a power-shuttle ( 36hp) and a 21hp 3range hydro-slack-o-matic. Like the Power-shuttle the best but very expensive. Looking to get into a tym 2515-3515 Shuttle-shift to "accent the fleet". Remember: ONE Tractor-can't "DO it ALL" !!!
@@donaldstrishock3923 this one is a hydrostat. We don’t have much in terms of fields so I don’t need to maintain the same speeds for long periods of time. The HST made the most sense for us. Our lawn tractor is also an hst. Idk if they still make ones that aren’t.
Definitely give Sean a call at smiths. Tell him I sent you and he will get you a good deal.
I’ve had some questions for him since and even had something shipped to me. I get my questions answered typically within minutes if I text him.
@@doubleahomestead7794 Thanks "fer" the "re-feral". Have a TYM-Branson Dealer 9 miles away up here in North-East Ohio. As fer "gear-drive's" ; have 3 Wheelhorse's in 6×2 ; just can't STOP them. With 3 more in the hydro-slack-o-matic configuration, they burn 38% more fuel to get the same "Werk-Dun"( always jimming with the go-leaver). As fer the "Big Trak-tors" go (anthing over 2000lbs) the Hydro-slack-o-matic's are the "Dream-boat" selling feature to the "hobby-farmer" & "Home-lowners": reason# 1 they are SO Cheep to manufacturer& command a Premium Price for the "Novice-convenience" Consumer; The Dealers "make" DOUBLE the upgrade price difference to a Gear-drive ( same exact model& cheeper to manufacturer). With 40% of the Hydrostatic's power going out the Exhaust pipe & tranfered to the "hydro-slack-o-matic's" transfer-case as Unusable Heat & a VERY deficient amount of "Go-power" to the wheels; like almost 60% LESS in reality.( they are NOT Desighned like Bulldozer Transmissions). Happy safe tractoring, and best wishes with all your endeavours.
you are right there in southeast NC, i am by MC BEE, SC
I’m actually in Michigan. But they were great with shipping and despite the distance I have no concerns on the dealer support.
i want to put a 70" mower deck under that, that why i can clear the path, bush hog and rake up all at the same time. :)
There you go, not a bad idea 😁
How much time has it spent broken down? I have a 574. It stays in the shop broken down matter of fact it’s in the shop right now the AC has gone out under 450 hours front axles went out at around 200 hrs it’s been one thing after another
@@matthewmilam286 so far. 0 minutes. Theres a guy on fb that has a knuckle kit to help the axles. Perhaps it would be worth looking into that.
I’ve only got 140 hours on it though so we shall see what the future holds.
Really wasn't trying to be negative, just trying to educate being I work around heavy equipment and have seen way too many people getting hurt not wearing proper ppe
Understandable. PPE is never a bad idea.
Nice tractor, we're currently in the market for one to help around the property. I've been looking at Bad boy.
Thank you
I believe TYM (kukje) have a contract to build them for another 6 years. They seem like solid setups and I assume they will use a lot of the same parts as Branson so will likely have decent parts support. Just try to find what the branson(TYM) crossover model would be for future reference.
Best of luck on your tractor purchase and once you decide, enjoy it 😁
$26000.00 last April, now $28000.00 plus 15% tax here in CANADA. :(
Prices are rediculous this year. This is for the 25 HP machine.
Translates to about 21k in the states not including the 15 percent taxes. Yikes!!!
I got a really good deal through smiths on mine. No one else was able to come close. Just ordered my filters through them for my 50 hour which I have to do this weekend. Every experience has been top notch.
How are you liking the 25hp tractor?
How much for this one? Where is the dealer
Where did you get your hydraulic top link? Looking for one for my 474
Sean threw it in with the package deal for me. So it came from smiths enterprise. Where they got it from I’m not sure.
If you call them they should be able to ship you the right one. Keep in mind if you plan on going to a quick hitch at some point let them know about that.
It looks like smiths forgot to grease your machine which is part of the pre delivery inspection
Everything was greased. Which part are you suggesting wasn’t?
I know all the zerks were greased as they all had plenty of grease in them.
Good luck
Thanks 🤷🏻♂️
Smith's Enterprise , Salemburg NC
Contact info is in the description as well to hopefully make it easier for folks.
I wanna see it in action
oh yeah- wear flip flops when using machinery- very smart
It’s fine, I promise. But I certainly appreciate your kind words. God bless
Tym is more affordable because of less corporate greed they are worth looking into
So far so good on my end. It continues to get the job done 100 hours later.
no 1 item on safe tractor driving is dont wear flip flops!!
Thanks for the tip.
“How did we get this tractor so cheap?” Because they suck….
You sell kubotas or John Deere’s?
HeeHee
Yanmar all the way. Study and then you will know.
Thanks for your input.
The Branson dealer couldn't keep them going absolutely horrible tractor hope you have good luck with the drive system
There’s a lot of people that have no issues with these tractors. While doing research I found complaints across the board with all companies and it remained pretty consistent.
This tractor is a TYM not a Branson. I know Branson is now TYM though.
But thank you, so far it’s been great up to 50 hours.
Strange looking pilgrims on the homestead have yall been fighting off indiams
What? 🤨