My chinese made USHA super de-luxe 1400mm uses the exact same shaft and bottom shackle and downrod size...Its also 16pole motor, but the WHOLE fan except the canopies are made from steel and even the motor is made from stamped steel. Only replaced the bearings, still running fine above my head...
Excellent! I really like how you removed that assembly between the motor shaft and the down rod. Most Chinese fans still have the same assembly nowadays. I prefer the method you used, where the shaft goes straight into the down rod.
I also had one Jamed fan named ajantha it's a cheap fan with aluminum windings I left it for some time next to a table fan then when I rotated it suddenly span
Kono 1 jon r Khaitan super high breeze 2to chilo. 12p tincan. Oi duto scrap kore replace e HS ar Jura laggiyechilo. Oi duto khaitan r downrod theke ami spacer gulo jhere diyechhi.
Sir, I have an doubt. While rewinding the fan, they were putting something white colour in the coil and rewinding (due to my Crompton cool breeze coil damaged using oil filled capacitor capacitor). But my cool breeze got damaged and while opening the fan motor that white thing were broke into million pieces. But can I use oil filled capacitor in my new Crompton high speed decora? Will it get the coil damaged?
IF THAT WHITWE IS A PLASTIC FILM PAPER, THEN ITS THE INSULATION SHEET. THAT IS A COMMON PROBLEM OF USED OLD WINDINGS WITH MILLION PIECES INSULATION PAPER SCATTERING. PLEASE ADVICE THEM TO PUT QUITE A GOOD AMOUNT OF INSULATING VARNISH AFTER REWINDING FOR BEST RESULTS. YES U CAN USE OIL CAPACITOR WITH ANY CEILING FAN. JUST NOTE, DONT USE SOME RUBBISH BRAND OIL CAP. THEY WILL LEAK OIL. USE TIBCON/KELTRON/CAPCO/CONCAP/HAVELLS/JIMCAP/GLOBE OIL CAPACITORS ONLY. OR ELSE USE KELTRON 2.5MFD PVC
14pole have more torque, less speed. Ideal for bigger blades. 10pole (an example) have less torque than 14p but more speed (small blades are ideal). More no. Of poles = more torque, less speed. You can calculate the magnetic speed of stator (coil) through Speed= (120×freq)/No. Of poles. So frequency always 50hz. So Speed= (120×50)/14= 428.57rpm So Actual motor speed always 15-20% less than the theoretical speed due to magnetic & frictional losses. So 14p 48" fan should have max. Speed of 350rpm around
@@SOURADEEPBISWAS What is the difference between a winding that has an 18+18 coil configuration (i.e. number of coils of start winding and that of running winding are equal) and an 18+9 coil configuration (i.e. number of coils of start winding is half of that of running winding) ?
I have a very old EPC ceiling fan which is never repaired but recently had a capacitor swop as it was running on a weak capacitor since 15years the fan is 32years old and has everything original except capacitor capacitor now is globe 2.25
12+12 slot 48 inch 380rpm er fan ke 36 inch high speed e convert korte gele kon kon jinis gulo kinbo? Ar notun stator laganor por ki shaft er setting thik tak hobe body tar songe?
8pole Stator with new shaft, Rotor ring (if required), Bearing, 36" blade set Aluminium medium, capacitor tibcon/capco 2.5mfd oil, capacitor connector egulo basically laage. 700-800 maximum khorcha hobe ar purono strator exchange korle 70-100₹ discount on new strator.
@Tanish Bhagat. If u rewind the fan properly using special grade copper, then performance may increase sometimes... Increment happened in local fans if the original winding is crap.
My chinese made USHA super de-luxe 1400mm uses the exact same shaft and bottom shackle and downrod size...Its also 16pole motor, but the WHOLE fan except the canopies are made from steel and even the motor is made from stamped steel. Only replaced the bearings, still running fine above my head...
Excellent! I really like how you removed that assembly between the motor shaft and the down rod. Most Chinese fans still have the same assembly nowadays. I prefer the method you used, where the shaft goes straight into the down rod.
I see. Actually all fans are now direct downrod type. These shackle type bracket is old technology
I also had one Jamed fan named ajantha it's a cheap fan with aluminum windings I left it for some time next to a table fan then when I rotated it suddenly span
One more thing anjantha fan is now unavailable do to the warranty and aluminum windings
Oil the bushes
16pole stator to ar paoyay jai na. valuable product
Is the airflow similar to Crompton Parkinson Sutlej from 1940s?
Absolutely NO
This is giving thin airflow
@@SOURADEEPBISWAS Sutlej give thickest air.
Yes
Rare model
Where was this fan earlier before restoration
other customer
Down rod er nut bolt er aluminium pad ta kotha theke kinlen?
Kono 1 jon r Khaitan super high breeze 2to chilo. 12p tincan. Oi duto scrap kore replace e HS ar Jura laggiyechilo. Oi duto khaitan r downrod theke ami spacer gulo jhere diyechhi.
@@SOURADEEPBISWAS 😂😂
Nice restoration. Nice fan.
Thanks bro
Is copper winding is powerful than aluminium winding? Because i wanted to rewind my Usha striker highspeed. It was 16 years old
Yes copper winding is obviously better as copper have highest conductivity & copper is less chemically reactive than aluminium so long lasting
You have given it proper new life
Epc is really good quality
@@ShashankArv better than what you own
@Saatvik Correct bro. This Shashank Arvind is actually some brother of Sounack das who in future will get bash
@@ShashankArv yes local fan but still iits good
Absolutely correct
Apni ki pintu dar dokan theke shaft paltalen?
Na table fan pintu da ar ceiling fan shiba da
New canopies are looking like orient canopies . Am I right ?
Yes local made cheap copies. Now I put polar canopies in the EPC
Shaft swap idea was awesome
thats replace.
Sir, where can i get the stator for 48 inch?
Fans spare market in your area
Better than Almonard.
Best fan
Exactly
@@SOURADEEPBISWAS Can you also make EPC Heavy Duty Exhaust Fan video?
Sir, I have an doubt. While rewinding the fan, they were putting something white colour in the coil and rewinding (due to my Crompton cool breeze coil damaged using oil filled capacitor capacitor). But my cool breeze got damaged and while opening the fan motor that white thing were broke into million pieces. But can I use oil filled capacitor in my new Crompton high speed decora?
Will it get the coil damaged?
IF THAT WHITWE IS A PLASTIC FILM PAPER, THEN ITS THE INSULATION SHEET. THAT IS A COMMON PROBLEM OF USED OLD WINDINGS WITH MILLION PIECES INSULATION PAPER SCATTERING.
PLEASE ADVICE THEM TO PUT QUITE A GOOD AMOUNT OF INSULATING VARNISH AFTER REWINDING FOR BEST RESULTS.
YES U CAN USE OIL CAPACITOR WITH ANY CEILING FAN. JUST NOTE, DONT USE SOME RUBBISH BRAND OIL CAP. THEY WILL LEAK OIL.
USE TIBCON/KELTRON/CAPCO/CONCAP/HAVELLS/JIMCAP/GLOBE OIL CAPACITORS ONLY. OR ELSE USE KELTRON 2.5MFD PVC
I use KELTRON 2.5 SILVER TYPE PVC (behaves as an oil filled capacitor)
8pole stator er dam koto aluminum winding copper noy
aluminium janina. copper jani
@@SOURADEEPBISWAS koto taka?
Just Purchase Rs.400-450; ar old copper strator exchange korle Rs.300-350
What is difference with 14 pole motor and 10 pole motor? Just a doubt
14pole have more torque, less speed. Ideal for bigger blades.
10pole (an example) have less torque than 14p but more speed (small blades are ideal).
More no. Of poles = more torque, less speed.
You can calculate the magnetic speed of stator (coil) through
Speed= (120×freq)/No. Of poles.
So frequency always 50hz.
So Speed= (120×50)/14= 428.57rpm
So Actual motor speed always 15-20% less than the theoretical speed due to magnetic & frictional losses. So 14p 48" fan should have max. Speed of 350rpm around
@@SOURADEEPBISWAS What is the difference between a winding that has an 18+18 coil configuration (i.e. number of coils of start winding and that of running winding are equal) and an 18+9 coil configuration (i.e. number of coils of start winding is half of that of running winding) ?
Kar theke koralen winding? Koto nilo?
Asha Electric. 400 niyechilo special copper (56") r jonno
@@SOURADEEPBISWAS special copper ar normal copper e tofat ki?
@@SOURADEEPBISWAS ami special copper bolleo jodi normal copper diye special bole thaole chinbo ki kore?
Alada kore chena jayena. Valo trusted dokan theke koralei holo.
Special copper mane good copper
Normal copper mane impure copper
Ami ajke akta fan dekhlam jetar stator size 18mm kintu rotor size 13mm matro. Thahole company kano choto rotor use korche?
Local company do anything they like. Apni fan body+ rotor r sathe match korlei holo. Stator ta 3-4mm boro holey no problem.
@@SOURADEEPBISWAS thank you so much for valuable discussion
Kolkata te ceiling fan painting e koto nebe?
Seta amar theek jana nei. Tobe dhore rakhun 500
@@SOURADEEPBISWAS 500 taka diye rong korar cheye to valo 750 taka diye notun fan kine neoya
Was kerosene oil used now in the video
17:07 ei somay video te je bearing lagano tools ta ache setar nam ki?
Bearing puller
@@SOURADEEPBISWAS bearing puller to bearing tolar jonno kintu ota diye apni houseing tate bearing ta lagachilen
maruti garir engine head r overhead valve stick.
Sir I have uploaded a video of 2 polar high speed ceiling fans.A small review
Can you check it out
I saw it. But those are ain't any Polars & both are 14p 340rpm fans. To me those looked like local fan iron body
But my uncle said these are polar ceiling fans
Maybe these are local ceiling
Well done bro, you've restored to it's original condition happy to see that,keep doing these good works, All the best 👍
This fan blows an enormous amount of air.
That's why new crompton fans have plastic cap on shaft to prevent water ingress.
And u removed it in your hsd brown.
Yes havells also plastic cap on shaft
@@aayushmaanagarwal5253 Is the model Pacer?
Sir why you have changed the downrod and shaft,,,?
Shaft was bent & damaged. So got a longer shaft which is similar to modern fans. Thats why replaced downrod to modern type.
Best restoration bro keep it up, 👍👍👍👍🙏🙏🙏🙏
Do you use Kerosene oil for restoration?
How do you use it?
A. Brush
B. Old stick
Both
@@SOURADEEPBISWAS 1 con about kerosene is its inflammable
1 more con is mustn't be used in bare hands
Apnar epic er ei fan tai rotor koto mm chilo? bolen ektu
The moter is looking like crompton jura
You are selling this fan beacause i want this fan
Buy Barsha 56" as its similar build quality
Barsha fans are kolkata fans have tried one
Downrod , thick bolt Type like 80s hb
and 80"s ckb
epc fans are available in the market or not
Only Industrial Pedestal & wall
Capacitor koto mfd?
2.25-2.5mfd
15:03 canopies looks like orient fans
Somewhat
Looks like oreint But canopies are local ones grabage company Orient
I have a very old EPC ceiling fan which is never repaired but recently had a capacitor swop as it was running on a weak capacitor since 15years the fan is 32years old and has everything original except capacitor capacitor now is globe 2.25
nice
12+12 slot 48 inch 380rpm er fan ke 36 inch high speed e convert korte gele kon kon jinis gulo kinbo? Ar notun stator laganor por ki shaft er setting thik tak hobe body tar songe?
8pole Stator with new shaft, Rotor ring (if required), Bearing, 36" blade set Aluminium medium, capacitor tibcon/capco 2.5mfd oil, capacitor connector egulo basically laage. 700-800 maximum khorcha hobe ar purono strator exchange korle 70-100₹ discount on new strator.
@@SOURADEEPBISWAS thank you so much
Nice 👍
You bought it exactly 1 yr ago
ACS
Ei fan amader schoole ache
How fast is it?
300rpm
Awesome job
why you dont use epc temptest canopies and downroad the botom canopi in closed not opened
epc canopies are already dried out & replaced downrod is thin...
And changed the coil winding?
you are selling this epc temptest fan
No bro.
But sir if we rewind a fan means the speed will be less compared to first time or it will be same sir?
It will be same.
@@SOURADEEPBISWAS No bro, when we regulate it, it becomes to slow.....
Slow if the rewinding guy cheats u by putting less turns of coil
@Tanish Bhagat. If u rewind the fan properly using special grade copper, then performance may increase sometimes... Increment happened in local fans if the original winding is crap.
Awesome fan
Awesome performance
Nice work
Nice bro video
Greate work,, keep it up Bro,
epc Air circulators are the best in performance I am planning to have one for me,
Yes for sure. Video coming soon on your topic
Good
selling this epc fan
No Sir. Not for sale. U will get it in Kolkata markets
Seller cheated u
You are selling this fan beacause i want this fan
Sorry I am not selling