This was the most tedious electronics repair I’ve I ever done but it was worth it. Changed the cross fader too that was super easy 4 screwed from the fron and just clip the new one in
Wow! I can only believe that Pioneer does this complex build on purpose to make any repair job seem impossible. Congratulations on the video, if it were me, there would definitely be half the screws left at the end of the service :D
Absolutely brilliant video my friend. My thing is phones and micro soldering. I have one here to repair. It has been dropped, it has bent knobs, no output sound and it rattles. It might be a no fix. Will see. The electronic's part is easy for me. I thought this might be a breeze. But so many screws haha!!! One thing with phones, is screw organization. I think it might be needed much so here. Will be sure to let you know how i get on. Your video is going to be invaluable to me. You have a new subcriber. I'll be sure to checkout your other video's. If i could offer a tip to others attemping this sort of thing. Video it and or take photo's for your own reference. I have torn down stuff in the past then might of had to leave it for a day or two for parts and then forgot things. You can go back and refer back to your work.
@@MTS_IT It was a Pioneer XDJ RX2. was easier to tear down that i thought. 3 of the boards were distroyed. Could of prob repaired one of them with jumper wires. I literally think it actually fell off the back of a lorry. But i'm sure there is a lot of money in it still in parts. Going to see if i can buy it for a silly price and tear it down. Watched a couple other of your video's. You have got a fan ;)
My DDJ RX has decided that it doesnt want to slow music down on one slider (the left temp slider) If I slide it down (increase tempo) from 0% (centre) down, it works, the red arrow lights up at the bottom as well. If I slide it from 0% UP.. nothing. Red arrow doesn't light up. In the software it doesnt register anything either from 0 and up. The right one works fine. I've hardly used this mixer as well! I contacted pioneer about it, but they claim its not compatible with virtual dj lol, this is the cause?? So I factory reset it, performed a firmware update, tried it on rekordbox and also put it in it's own standalone demo mode, it's not responding in demo mode either.. If you move the tempo slider UP in the software on the computer though, the red arrow pointing up will light up! So the controller is understanding the position when the software calls for it, but you just can't physically move it beyond 0 and up. Do you think this is a slider issue or are the tempo sliders different to the faders? thank you. Btw, this looks like a bloody nightmare to take apart! Need to get me one of those electric screwdrivers lol
hey good day bro can you do a video fixing sx3 and can you tell me where can I find sx3 crossfader replacement to buy online my sx3 crossfader is leaking bad need a replacement and a video on how to replace it
I have got addjs1. I think.it has aproblem with the board.when you connect it to the laptop and power it on it powers and then goes off instantly can you repair it..am from uganda africa thanks
Pioneer DJ purposely makes their gear to where you have to go through a service shop to replace the simplest stuff. No one should ever go through this just replace simple faders. Pioneer DJ is garbage.
This was the most tedious electronics repair I’ve I ever done but it was worth it.
Changed the cross fader too that was super easy 4 screwed from the fron and just clip the new one in
Wow! I can only believe that Pioneer does this complex build on purpose to make any repair job seem impossible. Congratulations on the video, if it were me, there would definitely be half the screws left at the end of the service :D
Good documentation 👍
I'm going to exchange left tempo fader this week.. madness to repair that console but way easier with your vid! Thanks mate!
Спасибо за туториал, я тут как раз разбираю и в шоке от количества соединений и вообще сомнительных решений в компоновке)
да .. много
MUCHAS GRACIAS , ME SIRVIO MUCHISIMO , NO PODIA CERRARLA , TNKSSS
De nada :))))
Absolutely brilliant video my friend. My thing is phones and micro soldering. I have one here to repair. It has been dropped, it has bent knobs, no output sound and it rattles. It might be a no fix. Will see. The electronic's part is easy for me. I thought this might be a breeze. But so many screws haha!!! One thing with phones, is screw organization. I think it might be needed much so here. Will be sure to let you know how i get on. Your video is going to be invaluable to me. You have a new subcriber. I'll be sure to checkout your other video's. If i could offer a tip to others attemping this sort of thing. Video it and or take photo's for your own reference. I have torn down stuff in the past then might of had to leave it for a day or two for parts and then forgot things. You can go back and refer back to your work.
Dave Hammerton woohoo :) tnx! Yeah, it will take you some time :)))
@@MTS_IT It was a Pioneer XDJ RX2. was easier to tear down that i thought. 3 of the boards were distroyed. Could of prob repaired one of them with jumper wires. I literally think it actually fell off the back of a lorry. But i'm sure there is a lot of money in it still in parts. Going to see if i can buy it for a silly price and tear it down. Watched a couple other of your video's. You have got a fan ;)
My DDJ RX has decided that it doesnt want to slow music down on one slider (the left temp slider) If I slide it down (increase tempo) from 0% (centre) down, it works, the red arrow lights up at the bottom as well. If I slide it from 0% UP.. nothing. Red arrow doesn't light up. In the software it doesnt register anything either from 0 and up. The right one works fine.
I've hardly used this mixer as well! I contacted pioneer about it, but they claim its not compatible with virtual dj lol, this is the cause?? So I factory reset it, performed a firmware update, tried it on rekordbox and also put it in it's own standalone demo mode, it's not responding in demo mode either..
If you move the tempo slider UP in the software on the computer though, the red arrow pointing up will light up! So the controller is understanding the position when the software calls for it, but you just can't physically move it beyond 0 and up.
Do you think this is a slider issue or are the tempo sliders different to the faders? thank you.
Btw, this looks like a bloody nightmare to take apart! Need to get me one of those electric screwdrivers lol
Redy drv602?
Me podrás ayudar necesito main la fuente ddj sx controlador
What tool are you using alongside the soldering gun to remove the original channel fader?
Slyboy0070 hi, this: rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F293459759346 (not affiliate) and wick
hey good day bro can you do a video fixing sx3 and can you tell me where can I find sx3 crossfader replacement to buy online my sx3 crossfader is leaking bad need a replacement and a video on how to replace it
I have got addjs1. I think.it has aproblem with the board.when you connect it to the laptop and power it on it powers and then goes off instantly can you repair it..am from uganda africa thanks
My ddj rb not lightning up when plug in USB cable places help me
kemar seaton is the power supply ok?
Скажите, звуковая карта ddj rx и ddj rr одинаковые по качеству звука?
RX имеет немного более высокое отношение сигнал / шум, но звуковая карта идентична между RR, RX и RZ
Нормально вы там винты покрутили ))) сколько времени занял весь процесс?
И хватит ... на час, может чуть больше...
Necesito reparar la sensibilidad de los jog no activan
brave !!! hahaha mission impossible lol
totally :D
do u have facebook to contact you ? i have an idea
not really (i'm probably the only person without it :D) however holler me at: vlad@i-vlad.com :)
@@MTS_IT done , check your inbox ;-)
По хочу чувак первый раз открывает ddj апарат...
Pioneer DJ purposely makes their gear to where you have to go through a service shop to replace the simplest stuff. No one should ever go through this just replace simple faders. Pioneer DJ is garbage.