@@jimbusmaximus4624 Yep for sure, the guy who put the V8 in this little truck, could learn a lot from david fryberger and mike Finnegan from roadkill, those Guy's love blowing shit up and replacing part's, hell they do it for fun !
Rule no #2, make do with whatever parts you have laying around, then spend the big $ later, replacing the parts that break one at a time, with good bits.🤷♂️
@@burniezarsoff4118 How else are you supposed to find the weak links? Plus swapping them out preemptively is wasting good parts; once they're...two, then it makes sense to replace.
Years ago I was sitting in the in the bed of a old lifted Chevy we were on the woods mud bogging and the guy said watch this and boom the rear end blew out in it in the mud hole
The old h190 just had enough. H233 out of Nissan Pathfinder and can be found with factory posi and disk brakes for way cheaper than what people want for 9"
@@preachers4135 I know you can shut down in gear. I typed or ended up with in. If vehicle won't shut off then use neutral is what should have said/post/typed.
I heard Rice Krispies: snap crackle pop, followed by the tale tale jack hammer, then the parking pawl screech. With my eyes closed I could tell that was a differential that just gave up the ghost.
Def the diff… the the parking lock was clicking…. It has a line lock kit on it so the rear brakes aren’t holding… puts some strain on tranny but not as much as actually hooking up and launching
Lol… only came with one side mirror from the factory. If you had ever built a car yourself in your driveway you wouldn’t make stupid comments like this 😂
Lots of mistakes were made. Hopefully, they were learning lessons. Some folks don't learn lessons on the first, second, third, or more. Nice looking truck though.
@@counterbalancecycles there is a frame of mind... if it blows, it is an opportunity to build it back better! However, sometimes you get tired of shit breaking and just want shit to work for you.
@@counterbalancecycles Been there done that. But until fixed properly don't push your luck. Baby it. Oh I am breaking in my engine is always a real good excuse.
![ไลฟ์สุ่ม iPhone 295 บาท... โกงมั้ย?[ โกงมั้ยครับ ep.97 ] | DOM](http://i.ytimg.com/vi/gdstHEE4UUE/mqdefault.jpg)
Rule #1 , when changing out the power plant, make sure the drive train can handle it !
Learning what torque is, the hard way!
@@jimbusmaximus4624 Yep for sure, the guy who put the V8 in this little truck, could learn a lot from david fryberger and mike Finnegan from roadkill, those Guy's love blowing shit up and replacing part's, hell they do it for fun !
Rule no #2, make do with whatever parts you have laying around, then spend the big $ later, replacing the parts that break one at a time, with good bits.🤷♂️
@@burniezarsoff4118 How else are you supposed to find the weak links? Plus swapping them out preemptively is wasting good parts; once they're...two, then it makes sense to replace.
@@corythomas4427 My thoughts exactly.😉
I'm thinking he slowed to a stop and was going to do a massive burnout but instead the rear blewout...
Yes, that's what the video showed.
You think? 🤔
Dude... are you sure??
Thanks for that insight! I had no idea what I was WATCHING!!!🤦🏼♂️
Idkkk…
Maybe double check
He about took the transmission out too on his way out lol
Indeed! The parking pawl screech always makes my hair stand up on the back of my neck.
Your obsessed with my parking pawl
*"Hey, watch this!"*
Hold my beer
"Okay, don't look hold on"
Lmao get to pushin 😂
Get used to pushing lol!
"Quick! Quick! Quick! There's a truck comin'!" 🤣🤣🤣🤣🤣
That 💩was funny. The only thing that was burning out was his shoes trying to push the truck off the road 😂😂😂😂
You know your in the right direction when you start breaking stuff!
Get it next time love the truck 👍 support the locals
9"ford rear end would work well for ya
No WAY TOO Heavey duty for just 51 horsepower.
@@donaldstrishock3923 🤣🤣🤣
Does that sound like a stock 4 banger? Lol… I swapped in a 350 v8
Always ends in disaster showing off to your boys lol
no hot doggin! lol...knew this was gonna happen eventually... now time to make it bullet proof!
@@counterbalancecycles cant wait to see it
you can only abuse her so many times is a lesson that comes with age
@@oldfart8501 idk, my old man always told me from a young age, "you can only abuse it so much before it'll fall off on you" 🤷🤣
@@counterbalancecycles Currie 9”?
The driveline fart...... priceless.
Looking good i had a white one
I owned one of those. 79 Datsun. I got it new. Loved the truck.
Years ago I was sitting in the in the bed of a old lifted Chevy we were on the woods mud bogging and the guy said watch this and boom the rear end blew out in it in the mud hole
Like a rock!
nice truck
Just one word... DANG!
You count better than the president!
I’m sorry sir, you’re overqualified for this position.
@@preachers4135 😆😆🤣😂
Sad, but true lol
The old h190 just had enough.
H233 out of Nissan Pathfinder and can be found with factory posi and disk brakes for way cheaper than what people want for 9"
love it..I'd take it with the old 4banger. had a 71 with a 1.8"stuffed" in it
1.8” stuffed? Was it in the glovebox?
Lol, standard rear end was designed for about 15 horsepower...
Beautiful truck
Yep been there done that . I never spin the tires unnecessarily anymore ,trannys ,rear ends ,spider gears .😂👍
Same here. Oh wait, what’s your definition of “unnecessarily”? 😈
Happens every time ,someone gets there wheels spray painted gloss black an all of a sudden it's a race truck 😂
Don't forget the J.C. Whitney hood scoop.🤣
@@MrJohnnyDistortion Hey that hood scoop is a required upgrade… so the racing dipstick will fit.
@@preachers4135
👍🏼It must have a 8-ball knob on it?
Lol
It’s because the v8 wouldn’t fit without cutting a hole in the hood
R.I.P. poor transmission parking pawl 🙏
Yes, makes the hair on the back of my neck stand up every time!
Lol yeah the parking pawl is what I’m worried about
Scituate. Plainfield Pike. Cool to see a local guy on here.
That looks like something that would happen to me.
They say if you can't find them grind them 🤔😂🤣
When we put a 350 in a chevy luv, we swapped rearends also.
Yeah that’s on the list… building it in my driveway has its limitations … and it’s pretty budget driven project lol
Stock Datsun rear end I'm guessing, it sounded like a snap in my R/C car when it breaks
Yeah stocker… waiting on it to break so I can put a ford 9 in it
Been there a few times lol
Aw man, he was gearing up for an awesome one wheel peel too🤣
That was fast
I remember these trucks back in the day no one looked at them twice now they're so cool looking.
Whatever it takes to get it
That was awesome do it again 😂
Shouldn't used the stock Datson rear.
If you're gonna hold the brakes and do that, get a adjustable proportioning valve. Makes everything fine
Line locks are better.
Yeah it’s got line lock
Time for an upgrade
Oh yeah ford 9 coming in hot!
Try a Nissan 5.6l endurance with supercharger and build a Ford 9in. rear and see what the lil Datsun can do😁
I have the same color truck here in Mina Nevada
What wheel and tire size are you running?
I bet the parking brake worked great
ooopps, poor fella, that's gonna cost him.
You need to change out the 7 1/2" gears for a Detroit positrack with 8" 3.73 ring & pinion gears. Also new stronger drive shafts.
It’s got a ford 9” coming soon !!
Who knows it feeling... Good😮...
Gotta say tho..she's a pretty truck forsure..
Yep u did . . . 🤦🏾♂️
Man that looks soo good
Now time to build it better!
Yesssss
Handsome guy
Atta boyy
That's what ya get for not buying American products
Lol! That was the stock Datsun rear end… ford 9” comin in hot!
@@counterbalancecycles U dont say genius
@@billmopar6461 thanks for your contribution!
How many GM corporate 10 bolts have met the same demise… with stock engines?
@@billmopar6461 oh please. Get on with it
You can shut a vehicle off or neutral sometimes is necessary.
Actually you can shut them off in any gear.
One caveat: if it has an Allison transmission DO NOT turn the key back on without first coming to a stop.
@@preachers4135 I know you can shut down in gear. I typed or ended up with in. If vehicle won't shut off then use neutral is what should have said/post/typed.
I was scrambling cause I thought the d/s itself broke… yeah this thing just has a kill switch I can kill it anytime.. just some adrenaline pumping lol
Damn we coasting now
That’s alright it’s still a nice truck
you clean the teeth off of that ring and pinion !
Yes I agree its time to put money in my s10 rear...
Customer states he got his differential replaced in "another shop".
I couldn’t I’d be so pissed I wouldn’t want to push it
was that the stock rear axle, my 4 banger will blow the stock one.
It’ll buff out 😂
Excelente
It's need some carbon clutches on a differential rear side except spider gear on datsun 620
You didn't show the back of the tailgate. Where it says DATSUN
Looks to me like that was the clutch giving way, not the rear diff
I heard Rice Krispies: snap crackle pop, followed by the tale tale jack hammer, then the parking pawl screech. With my eyes closed I could tell that was a differential that just gave up the ghost.
Def the diff… the the parking lock was clicking…. It has a line lock kit on it so the rear brakes aren’t holding… puts some strain on tranny but not as much as actually hooking up and launching
This is my first car
I'm surprised it made it that far
Lol me too! Trust I had countless burnouts before this one…
@@counterbalancecycleswas all in pieces ? How bad was it?
Haven’t cracked it open yet… just finalizing some measurements for a narrowed ford 9”
@@counterbalancecycles nice , might as well go with the one of the best diffs but 720's are small how many inches did u cut on each side ?
@@zacariasblanco9738 the WMS to WMS on the 720 is about 54”
Good job Finnegan
I take that as an attack! Lol
Yep! The differential gears were badly worn out and they gave up on video
time for that 8.8 from a v8 explorer.
Well, stock diff won't work. Lol
Classic
Dude! Didn't anyone tell you to put a ford 9" rearend behind that v8?
Yeah they just didn’t give me the money for one!!
V8's & 7in. Rear end don't work well together
Haha! Ford 9 comin in hot!
Still cool truck that shit happen
Nice
🫣 mano! Esperar tanto por esse momento ehhh páh! Oooutch fuck #@
I think I drive THAT Datsun truck belonging to Mick “ The Snake” Stewart from Anchorage AK
..... I feel like that could have gone a lot better.
Lol! I wish!
@@counterbalancecycles that is a sweet little truck tho!
Should have bought a Toyota 🤣
Nice truck but needs alot time. You have only 1 side mirror and driveline not properly done and you want to do a burn out, you burn your shoe instead.
Lol… only came with one side mirror from the factory. If you had ever built a car yourself in your driveway you wouldn’t make stupid comments like this 😂
@@counterbalancecycles nice truck despite having one side mirror is a stupid comment??
Lots of mistakes were made. Hopefully, they were learning lessons. Some folks don't learn lessons on the first, second, third, or more. Nice looking truck though.
Lol… I knew it was coming… just making upgrades as I can afford them
@@counterbalancecycles there is a frame of mind... if it blows, it is an opportunity to build it back better! However, sometimes you get tired of shit breaking and just want shit to work for you.
Must still be runnin a Nissan rear end.
Weld it up!
Why on earth 🌎 would he run the stock differential?
Are you gonna pay for a rear end for me? Some people are on a budget
If money is available to put in a bigger engine, change the Bango too. How long did he think it was going to hold up to that kind of power.
@@johnpopoff7950 it lasted 3 years with this rear end. Picked the motor and trans up on a deal for 1000 bucks.
Look in the mirror say Nissan Datsun 3 times.
The FBI approves of this message
Damn, that sucks 😔
DAT SOON?
Já fiz isso kkkk
Should've had a Ford Ranger...TAFFR
Lolz
If that was stock rear end he should have known better
just rebuild the diff and get a new drive shaft
Sheer disappointment. Wanted the smoke show. Ouch
lmao should dropped a sr20 into a ranger like ya boi
"DORKS DELIMMA"
Lol just trying to have a good time
Did he spend all that time building the truck and not upgrade the axle ??
I’m on a budget man… have plans for the rear end so while I save up I drove it with the stock rear end
Worked til it broke
@@counterbalancecycles Been there done that. But until fixed properly don't push your luck. Baby it. Oh I am breaking in my engine is always a real good excuse.
🤡🤦
@@counterbalancecycles That’s the good way to do it. Don’t be like congress, debt is DUMB!
Damn!! Too much traction and not enough gear.
And fs Tran up too
Funny and a bummer