Pinball mods-Cheap Mega Bass mod for your Jersey Jack Guns and Roses Pinball machine!
ฝัง
- เผยแพร่เมื่อ 4 ม.ค. 2021
- In this episode, I show you how to do a sub $100 bass mod for your Jersey jack Guns and Roses pinball machine, this mod will work with Stern and other pinball machines too!
Here are the direct links to the products I used for this video!
amzn.to/2MEzpdZ Amp
amzn.to/2XerO7U Line Level converter
amzn.to/3rXf5V8 RCA cables
Just completed the mod using your links. it’s perfect thank you! You Rock!!!
Great video. Quick question: I have a 12" Polk Audio 150Watt External powered sub laying around. Would you suggest just tapping off the current sub terminals and using speaker level inputs and letting the sub crossover do the work? Or use a line level converter like you suggest and then run one RCA to the Sub LFE input? Or run both RCA to L and R line level inputs on the sub? (ok, maybe it wasn’t a quick question). lol
Hey thanks for the video! My GNR sounds fantastic. My SW and Mando both have a ground loop hum. Mando is louder than SW. I have pinstadiums on those games which occupies the service outlet on the power supply so I ran the power for the new amp out of the bottom of the cabinet into a power strip on both games. I’m assuming my issue is that the amp needs to be tied into the power on the game for proper ground? I tried an RCA ground hum eliminator after the line level adapter before the amp but that didn’t help. Any advice would be appreciated!
Great video. I will be buying this parts
Can I assume that just using a passive low pass filter or cross over just wouldn’t cut it because of the poor power in the original amp? Has JPP added an EQ adjustment to their programming yet? (Thank you for the great vid!)
Hello, been trying to buy that Boss B65n but can’t get them in the Uk… and not even on Amazon. Can you recommend something similar that will do the job without spending a fortune? Thanks.
Awesome. Thank you for a great video on this sound enhancement. I am ordering all the parts from your list. Can you do a video on the sound with the enhancements vs stock with the music? I love all your pinball videos. Keep on flipping.
Thanks I installed your mod and i m very happy with it. I would like to know if we can also add an active subwoofer and wow i can do it if it s possible. Thank you for your help ;)
Do you think this mod offers better quality sound than the Pinnovators PinSub adapter? Thanks in advance.
Great video! I'm going to go out on a limb and say that this mod could possibly work on any late model pin possibly Williams/Bally's?
I am getting a constant hum when the power is on. Any way to eliminate that?
I installed this mod on my Wonka and love it. I do have a slight hum when using the included power adapter. I tried connecting to 12vdc power straight from the pin but the hum remains. Can you recommend a filter or other device to eliminate the hum. The Hum is only noticeable while the game is idle. Cant here any hum during gameplay - Thanks
You mentioned that we should buy an upgraded speaker before installing this so you don’t pop the stock speaker. Is the stock cabinet speaker on the JJP GnR good enough quality or did you already upgrade it?
Thanks for this vidéo. But i don t underground everything cause i don t speak english very well. I want to be sure how join the wire (+\-) (L/R)