Suzuki Vitara. I did tpms reset procedure and programmed all id's (as automatic relearning didn't work). I hope successfully as at the end tpms led was solid for approx. 5 sec which means success as far as I found. However I have another problem. After turning ignition on and reaching approx. 30 km/h, tpms led is blinking showing with this blings digits 1,2,3 and next it blinks for approx. 10 km-12 according to sequence "long off, short off". After approx. 10-12 sec it blinks agains digits 3, 2, 1 (in reverse order, each digit is being blinked few times) and then I got the correct pressure values displayed when I enter tpms menu (earlier there is nothing). Do you perhaps know what this 1,2,3 - long off/short off - 3, 2, 1 sequence means? Is that some kind of calibration? And the problem is that this "calibration" procedure is repeated every time after turning off and on the engine (only if the engine is off for short time the system doesn't run again calibration). How to "remove" this "calibration"? There are not DTCs codes visible for typical diagnostic software.
Hi Guys. Have pumped up the tyres to correct levels as one showing low. Even though the presure are correct, the warning remins on the dash display. It's a Suzuki Vitara 2017 Model. Is there a dash reset option?
Bringing pressure to the tyre for which the low pressure alert was active did not switch it off. Usefull trick my dealer told me: give all tyres some extra pressure while the engine is running. Alarm gone :)
@@fifik6990 hi sorry late reply. I pumped all tyres up done the tpms set button Then drove around for a while The computer takes its time to reset which is annoying but now all clear
I've just had this happen to me. Fixed by inflating all 4 tyres to 33psi. And then drove it. Fault cleared on its own.
Suzuki Vitara. I did tpms reset procedure and programmed all id's (as automatic relearning didn't work). I hope successfully as at the end tpms led was solid for approx. 5 sec which means success as far as I found. However I have another problem. After turning ignition on and reaching approx. 30 km/h, tpms led is blinking showing with this blings digits 1,2,3 and next it blinks for approx. 10 km-12 according to sequence "long off, short off". After approx. 10-12 sec it blinks agains digits 3, 2, 1 (in reverse order, each digit is being blinked few times) and then I got the correct pressure values displayed when I enter tpms menu (earlier there is nothing). Do you perhaps know what this 1,2,3 - long off/short off - 3, 2, 1 sequence means? Is that some kind of calibration? And the problem is that this "calibration" procedure is repeated every time after turning off and on the engine (only if the engine is off for short time the system doesn't run again calibration). How to "remove" this "calibration"? There are not DTCs codes visible for typical diagnostic software.
Hi Guys. Have pumped up the tyres to correct levels as one showing low. Even though the presure are correct, the warning remins on the dash display. It's a Suzuki Vitara 2017 Model.
Is there a dash reset option?
Hi how did you manage to resolve
I have a vitara 2022 with same issue
Bringing pressure to the tyre for which the low pressure alert was active did not switch it off. Usefull trick my dealer told me: give all tyres some extra pressure while the engine is running. Alarm gone :)
Hi I’d like to know the answer to this as my dash will will not reset even through the tyre pressures are correct
I have the same issue suzuki vitara 2022
Did you manage to solve it
I've tried driving it to see once Tpms is reset it would go away but still on
Hi. I have the same. Did you figure it out? Vitara 2022.
@@fifik6990 hi sorry late reply.
I pumped all tyres up done the tpms set button
Then drove around for a while
The computer takes its time to reset which is annoying but now all clear
@@jones2162 Thanks for reply. What brand tpms did you use? Was it oem or aftermarket ones?
Could not hear u bro no it wasnt helpful at all.