When you discuss mechanical flipline adjustment, I have to say the the Akimbo is far and away, the best option for me, and offers the most options of anything you could put together. Great video!!!
I'd get rid of the pulley in a single-hitch, double-ended lanyard setup... I prefer the inconvenience of manually tending a prussik to the risk of taking a 10' fall into my D rings, because that's gotta hurt like hell and then you're left awkwardly dangling with little options for a rescue. Alternatively you can have a full pulley and hitch system on either end of the lanyard. I have a pretty long ~25 ft lanyard with a bare-bones second system (prussik without pulley) on the other side, all my carabiners are triple action 22+kN so I can use them for main life support. It goes as such: [oval carabiner] - (rope)- [
I just want to add that you could choose steel for that last carabiner if you don't mind the extra weight, since it would better tolerate the side-loading that happens in some of these scenarios
I really like the Buckingham "Buck Grab" adjuster. I never have an issue with not being able to let slack out under load. I just stand up a bit and take my weight off of it. I never look at the thing and the orientation of the attachment point on there keeps it from flipping around. I'd like to try that first rope you had there.
Great vid 👍🏼 I recently have been using ocean hitch cord with the Knut hitch and a hitch climber eccentric pulley. Takes up slack fast and grabs reliably. Definitely think using a bidirectional prusik knot is the way to go for most new climbers.
I have been working with some pretty basic.Arborist tree climbing equib. Have been browsing around.To how I could improve equib.Good review The double ended adjustable would have advantages.
Great video, should have mentioned the thimble prussic! I run it after the adjuster, use it to hook into my secondary D's so the lanyard is truly two independent systems.
That first double adjustable is quite handy, especially limb ascending. But its technically not two attachments as both depend on the same hitch on one side.
Million dollar idea - steel core lanyard for handsaw proof, with braid sheath for hitches, with that chainsaw pant material beneath it to bind up chainsaw. Now go ahead somebody, make that...
Great video tutorial. Thank you. As a side note, this great guy looks a lot like the actor Steve Buscemi, I feel like I am seeing a Quentin Tarantino movie jeje.
We did it at Nicks's house in October, then TCIA, then Thanksgiving and then Christmas came! We've always got a ton of videos in the pipeline, part of how we have over 1500 arborist specific videos.
A bi-directional prusik is one that will grab in both directions, ie if you pull on either side of the host rope, it holds. A standard 3 or (or more) wrap prusik, called english or french prusiks, is bi directional. A VT or schwabisch or similar are uni-directional in that their holding power is really just if you pull one direction. Keep in mind a bi-directional is basicale uni-directional IF there is a pulley behind it, as i show in the video.
When you say you cant load it out with the mechanical adjuster on the wirecore flip line wht do you mean by that? what are the pros and cons of having a normal prussik on a wirecore as opposed to a mechanical one?
What is the timestamp you are asking about? A prusik works fine on a steel core lanyard but given the extra bulk of the lanyard some people prefer the on/off of the adjuster, versus the prusik.
Don't know how people keep their work clothes and climbing gear neat clean and pretty! Doesn't take long for my gear to get that dirty and used look. I buy the cheap clothes to work in because at the end of the climbing day my clothes are horribly dirty. Crazy right!
TEchnically yes, you can use a rock climbing harness. In reality: no as you will swing left/right off the tree and why ALL tree climbing harnesses have D rings on the sides. You can test this out at home with a tree in your backyard. Likewise you can make up a pair of D rings for your rock climbing harness and find out WHY you need them.
The only version of wire core fliplines we sell other than our own are Yale Flemish Spliced Eyes, and the 5/8" version from Climbright. Everything in life fails if it is abused and isn't inspected. The crimped style of wire core fliplines is not unsafe, just prone to failure if used for years on end and not inspected.
Can someone advise a good prusik rope to use on a 12.5mm wire core lanyard? I would like to give a try to a 2 in 1 lanyard system but don't know wich diameter, material or brand for a prusik I should choose. I saw that there is wire core prusik rope from Yale I think, is it any good?
Question; when making your own rope lanyard are there types of rope that work best? Im thinking mostly of abrasion and how they run with a prussic or rope grab. I’m looking for something 1/2 to 5/8 diameter.
Under what conditions is a Rope Logic crimped steel core lanyard better than Yale's Flemmish Splice? There's no way that a simple crimped steel core lanyard can structurally be better than a Flemmish splice. I call BS
The Rope Logic wire core lanyards are redundant because the eye captures the wire core AND the load-bearing jacket. Plus, it protects the core at all times because there's never any exposed cable.
I did not say that - My point was that IF you were to fall in that situation, the lanyard would still prevent a fall to the ground, which is much better than not being tied in at all. -nick 2:43
When you discuss mechanical flipline adjustment, I have to say the the Akimbo is far and away, the best option for me, and offers the most options of anything you could put together.
Great video!!!
I'd get rid of the pulley in a single-hitch, double-ended lanyard setup... I prefer the inconvenience of manually tending a prussik to the risk of taking a 10' fall into my D rings, because that's gotta hurt like hell and then you're left awkwardly dangling with little options for a rescue.
Alternatively you can have a full pulley and hitch system on either end of the lanyard. I have a pretty long ~25 ft lanyard with a bare-bones second system (prussik without pulley) on the other side, all my carabiners are triple action 22+kN so I can use them for main life support.
It goes as such: [oval carabiner] - (rope)- [
I just want to add that you could choose steel for that last carabiner if you don't mind the extra weight, since it would better tolerate the side-loading that happens in some of these scenarios
I really like the Buckingham "Buck Grab" adjuster. I never have an issue with not being able to let slack out under load. I just stand up a bit and take my weight off of it. I never look at the thing and the orientation of the attachment point on there keeps it from flipping around. I'd like to try that first rope you had there.
Just got a grillion from these guys and its amazing. Love these videos the rigging demos are great.
Very informative, thanks for cutting right to the chase 👍
GOOD JOB! I love the double end you can move around faster, safer!
Great vid 👍🏼 I recently have been using ocean hitch cord with the Knut hitch and a hitch climber eccentric pulley. Takes up slack fast and grabs reliably. Definitely think using a bidirectional prusik knot is the way to go for most new climbers.
InstaBlaster...
Nick - this is the ducks nuts - great insight. Thanks for sharing
Glad you liked it!
I have been working with some pretty basic.Arborist tree climbing equib. Have been browsing around.To how I could improve equib.Good review The double ended adjustable would have advantages.
I've only used spikes and a Blake's hitch only. I find it amazing just how many things there are for climbing now.
Great video, should have mentioned the thimble prussic! I run it after the adjuster, use it to hook into my secondary D's so the lanyard is truly two independent systems.
Excellent nick 👍🏼
Great video!
Glad you enjoyed it
Great video..... very good info. I was thinking about it today as I was 80' up on my "orange one" thanks for that😡😅
That first double adjustable is quite handy, especially limb ascending. But its technically not two attachments as both depend on the same hitch on one side.
Million dollar idea - steel core lanyard for handsaw proof, with braid sheath for hitches, with that chainsaw pant material beneath it to bind up chainsaw. Now go ahead somebody, make that...
Great video tutorial. Thank you.
As a side note, this great guy looks a lot like the actor Steve Buscemi, I feel like I am seeing a Quentin Tarantino movie jeje.
Thanks, nice video!
thanks for the overview!
Wow. This was recorded a while ago. It's dead of winter. Can't wait to climb without all those layers for warmth again.
We did it at Nicks's house in October, then TCIA, then Thanksgiving and then Christmas came! We've always got a ton of videos in the pipeline, part of how we have over 1500 arborist specific videos.
Duck and Petzl microscender work mad
I have. A boat rope ...can I used for Landyar
good job.. thanks..
How long is the wrap star hitch?Thank you
What length is the wrap star hitch cord?
Good idea you
What's the name brand of the green flip land yard
That is a Rope Logic Steel Core.
Nice stuff there Nick. But I don't understand the bi directional pursick? If I am saying that right???
A bi-directional prusik is one that will grab in both directions, ie if you pull on either side of the host rope, it holds. A standard 3 or (or more) wrap prusik, called english or french prusiks, is bi directional. A VT or schwabisch or similar are uni-directional in that their holding power is really just if you pull one direction. Keep in mind a bi-directional is basicale uni-directional IF there is a pulley behind it, as i show in the video.
When you say you cant load it out with the mechanical adjuster on the wirecore flip line wht do you mean by that? what are the pros and cons of having a normal prussik on a wirecore as opposed to a mechanical one?
What is the timestamp you are asking about?
A prusik works fine on a steel core lanyard but given the extra bulk of the lanyard some people prefer the on/off of the adjuster, versus the prusik.
So many technical minds in these fields, not where i come from, rigging
Thanks
No problem
Don't know how people keep their work clothes and climbing gear neat clean and pretty! Doesn't take long for my gear to get that dirty and used look. I buy the cheap clothes to work in because at the end of the climbing day my clothes are horribly dirty. Crazy right!
Uh, why he SELLS gear, does not USE the gear.
Can you use these for harnesses that only have a from belay loop?
TEchnically yes, you can use a rock climbing harness. In reality: no as you will swing left/right off the tree and why ALL tree climbing harnesses have D rings on the sides. You can test this out at home with a tree in your backyard. Likewise you can make up a pair of D rings for your rock climbing harness and find out WHY you need them.
Suppose it’s time for me to replace my Walmart bungee strap I’ve been using
Why does Tree Stuff still sell the Climb Right lanyard if it's faulty?
The only version of wire core fliplines we sell other than our own are Yale Flemish Spliced Eyes, and the 5/8" version from Climbright. Everything in life fails if it is abused and isn't inspected. The crimped style of wire core fliplines is not unsafe, just prone to failure if used for years on end and not inspected.
Great video, very informative. But please pronounce Prusik "prew-sick". 😆
Can someone advise a good prusik rope to use on a 12.5mm wire core lanyard? I would like to give a try to a 2 in 1 lanyard system but don't know wich diameter, material or brand for a prusik I should choose. I saw that there is wire core prusik rope from Yale I think, is it any good?
I think a 10mm Prusik is a good choice. www.treestuff.com/notch-wrap-star-10-1mm-prusik-cord/
-nick
@@user-ku2qb1pq7e what length prusik would you recommend?
Question; when making your own rope lanyard are there types of rope that work best? Im thinking mostly of abrasion and how they run with a prussic or rope grab. I’m looking for something 1/2 to 5/8 diameter.
I really like the Tritech lines, but 1/2" 16 strand works well and is easily knottable or spliceable. - Nick
@@user-ku2qb1pq7e thank you sir!
Uh no!!! If I fall, I don't want rope feeding out!
Under what conditions is a Rope Logic crimped steel core lanyard better than Yale's Flemmish Splice? There's no way that a simple crimped steel core lanyard can structurally be better than a Flemmish splice. I call BS
The Rope Logic wire core lanyards are redundant because the eye captures the wire core AND the load-bearing jacket. Plus, it protects the core at all times because there's never any exposed cable.
Cut resistant
Considering it's all free for you.... I'd say you do love the best out there....
"I would've fallen, but that's OK". Says the pro.... Not OK.
I did not say that - My point was that IF you were to fall in that situation, the lanyard would still prevent a fall to the ground, which is much better than not being tied in at all.
-nick
2:43