I did this years ago to ear buds when they actually had a wire and plugged into something. Thinking about doing this on the new build. Happy to see someone else that thinks outside the box! 👍🏻👍🏻
That is definitely the right way to remove wires from connectors. Should, when you push the wire back into the connector, the wire wiggle in and out, remove the wire again and raise the little lip carefully on the crip that is on the wire up with an exacto knife. Also: lovely smile 😂
Nice! Having done something like this with paracord before I feel your pain! The best tip I can give is to Use a lighter and singe the ends to melt them. This keeps the tips together and they fray less while you are working with it.
For the tabs. The easiest way I have found to remove the wires is to put the black plastic end in a vise, then use a knife to pry up the lock thing while gently pulling the wire.
You learn something new everyday! You dont learn untill you try ....id probably set it on fire lol...i save my old servo wires ...cut desired amount and replace!
You can buy braided expandable PET sleeving wrap which would be easier. You can get it in loads of colours and pattens too and it wouldn't fray like that cord cause it is a specific wire sheath 👍🏻
paracord sounds a lot nicer than the plastic woven wire loom stuff I used to use. Wondering if you could take the servo cord to the core before you pull the core out so that it pulls the wires through at the same time? Kickin ass with the videos dude. Stoked for more build bios, youre building the sickest rigs.
I had to pause to give YOU a tip.. super glue and cotton ball to build up new material and fix your scissors. Of course, you should follow appropriate safety measures when super gluing. We don't need another Edward Scissor hands running around, now do we?
I did this years ago to ear buds when they actually had a wire and plugged into something. Thinking about doing this on the new build. Happy to see someone else that thinks outside the box! 👍🏻👍🏻
Lets all chip in and get this guy some new scissors ✂️ 🙌 😎
😂
Yes, I'm in for $1
There is nothing wrong with those. :).
awesome Video, thanks for sharing. to shorten servo wires. get a JST terminal crimper and a 2.54mm jst connector kit off spamAzon
This was awesome!!! The frustration and the learn as you go technique makes for great content, always keep your wire wrapped LOL!!! Rock on!!!
That is definitely the right way to remove wires from connectors. Should, when you push the wire back into the connector, the wire wiggle in and out, remove the wire again and raise the little lip carefully on the crip that is on the wire up with an exacto knife.
Also: lovely smile 😂
Tape the wires to the inside piece of the paracord, then when youre pulling out the inner it will pull your wires through at the same time 👍👍👌
Nice! Having done something like this with paracord before I feel your pain! The best tip I can give is to Use a lighter and singe the ends to melt them. This keeps the tips together and they fray less while you are working with it.
Please upload more! I can’t get enough of this information.crunch time 0:39
YO! This is genius! There's paracord in the Dollar Tree craft section in a bunch of colors, they have scissors too.
For the tabs. The easiest way I have found to remove the wires is to put the black plastic end in a vise, then use a knife to pry up the lock thing while gently pulling the wire.
We use paracord to wrap our mouse cables for gaming mice, makes them nice n flexable.
That's cool I love this idea nice tire rack too 😂 thanks for sharing 👍
Hello my Friend ! Great vid ! I bought pins and pin plyers to make custom length wires. With your skill I know you can do it . Pease!
Sweet, I'll need to get some. Thank you!
Awesome👍👍,You always put a smile on my face mate. I got some blue......if ya need some.
Awesome idea! Now I have to redo all my rigs!!...thanks alot. Keep up the videos
Loving these ASMR videos. So soothing.
You learn something new everyday! You dont learn untill you try ....id probably set it on fire lol...i save my old servo wires ...cut desired amount and replace!
droppin a thumb cause that heat shrink is crazy
The fact that u can make paracord interesting beyond a survivalist aspect of use !!! Hats off to u my friend 🍻 fuck ya
Great hat!
Just got mine in the mail today! Intime for 4/20 !🐻
You can buy braided expandable PET sleeving wrap which would be easier. You can get it in loads of colours and pattens too and it wouldn't fray like that cord cause it is a specific wire sheath 👍🏻
Awesome!! What do I search for to find this? Or, link?
@@24YeppAmazon,the 1/8” works best for 1/24 stuff,easier to work with too!
Just search for this:
Tight Braided PET Expandable Sleeving Wrap For Wires
You can buy with in different internal diameter sizes. 👍🏻
Their pricing is ridiculous for the poor print quality they show on their website. 👎 Respect for what you made out of it!
Bro the chips master🙏
paracord sounds a lot nicer than the plastic woven wire loom stuff I used to use. Wondering if you could take the servo cord to the core before you pull the core out so that it pulls the wires through at the same time? Kickin ass with the videos dude. Stoked for more build bios, youre building the sickest rigs.
There is definitely an easier way to do this for sure lol. Thanks man I appreciate it
Always awesome videos 🤘🏻
Off topic but I'm thinking of doing an scx24 with the delorean body from Playmobil
You already know I love this idea
Don't think, just do it!
Try fishing a McD's straw through the cord first. It's how I get it done with other wraps. Also, those connectors can be put back on.
What body do you have/use for your killr Spectr chassis?
I had to pause to give YOU a tip.. super glue and cotton ball to build up new material and fix your scissors. Of course, you should follow appropriate safety measures when super gluing.
We don't need another Edward Scissor hands running around, now do we?
Trey, was that orange primer baja bug at the 1:00 also a playmobil? I like how you did the headlights on it, would love to see more.
Vt3k body, I'm planning on making a video soon showing it
I wonder if he ran the lighter gently back and forth over the paracord would it shrink up a bit to the servo wires and make an even nicer finish?
Cheap and easy to try! 👍👍👍
Day 5 of asking for you to show off all your cars ❤
I use paracord as my Boot laces. :)
Hilarious as always 😂😂😂😂
Hey dad, pls do a short video of just silence and mean mug faces and eating!!!! !!!!!
lmao!! Great video brother.
Day 4 of asking for a dungeon tour!😂
Day 5
Of asking for a dungeon tour
Great video, 😂😂😂
Slide a sewing needle into the 3 that’s on the plug and they slip right out
You look so serious 🧐😅
Ha ha 😂, yeah best way to learn is from mistakes . You should see my rig build
I need to get me some orange lol
Broke character lol so good
Why did you smell the inside of the para cord? 😂
I don't have a good answer for this 🤷♀
goose
Whatever it is that is wrong with you aint no little thing. 🤨
Yet another great vid thanks so much. 🫡
Love you too 🙃