Good video there are no others on this. The ES has two O2 sensors which he shows. The first is before the catalytic converter, bank 1 sensor1. The other after bank 1 sensor 2. This appears to be attached to converter. Upstream b1s1 closer to engine. Downstream b1s2 further back after the first sensor.
Tnaks for your video, My question is: both sensor are the same? I mean I would like to buy both sensor but I don't know if there is any diference between them... Thanks!
Dude great video. Just curious to know which you got, if non original or original and if non original what name brand and again thanks for sharing this video. ✌
I drive my friends (2008 Lancer) sometimes and i find it doesn't coast as well as a few years ago. Meaning, i have to give it more gas to get it moving and to keep my foot on the gas or else the Lancer quickly slows down. Its very irritating to drive around in a stop and go traffic. We have so many traffic lights here. So if i change the (o2 sensor), that should fix the problem?
Ok, thank you very much. i found a website explaining how important it is to clean. And it explained the PCM computer board that controls so much. i was thinking about how to increase the throttle but all modern cars can not be set manually, haha. Cleaning is all i can do for now
I have the same issue, ive cleaned the throttle,cold air intake and replaced the MAF sensor an nothings changed so I just just step on it more in stop n go traffic 😅😂
Hey. My wife has a 2013 mitsubishi lancer ralliart and the mitsubishi dealer said there was a problem with the b1s2 sensor. From what I understand, that's the bank 1 sensor 2, so downstream. Is that cable actually going from after the cat to the passenger seat? Thanks.
@@irvingpozo7167 Alright and I'm thinking of buying a cheap o2 sensor part. Here's the link : www.rockauto.com/en/catalog/mitsubishi,2013,lancer,2.0l+l4+turbocharged,1505480,exhaust+&+emission,oxygen+(o2)+sensor,5132 I'd get the "ULTRA-POWER 2344114" since it's only 30$... What do you think of cheap parts like those? Thanks a lot btw for the help... Life changer I'll be able to change it by myself.
Hey man I have a misfire in my 2010 lancer gls and I think it's the o2 sensor because I changed and cleaned everything else from sparkplugs to injectors and everything. At low rpm the car starts to vibrate and I don't know what the hell is wrong?
My car vibrates too I have to change the motor mounts, but for u idk what could be the issue can be. Maybe you should clean the fuel with the cleaner u put in ur gas tank.
Can I please have a picture of where the sensor in the front connects to up in the engine bay? I can't find it anywhere I could really use a hand please. Thank you I appreciate it :)
![โจทย์โหดเหมือนโกรธเป็ดถีบ [อะไรอยู่บนหัวกูวะ ... EP.4]](http://i.ytimg.com/vi/Dqlb7EZ9PGk/mqdefault.jpg)
Duuude thanx, I keep looking an still no videos on this exact year,model an trim wen it comes to the o2 sensors, its a big help
Wish you would show how to wiggle the connectors out, I'm not able to get it out under the seat!
Good video there are no others on this. The ES has two O2 sensors which he shows. The first is before the catalytic converter, bank 1 sensor1. The other after bank 1 sensor 2. This appears to be attached to converter. Upstream b1s1 closer to engine. Downstream b1s2 further back after the first sensor.
Appreciate it
Thank you so much for the help!!
Thanks for the help. good to know the O2 sockets are unnecessary for this model
Cheers dude, helped a lot
Very helpful thank you
No problem
Thank you
Tnaks for your video,
My question is: both sensor are the same? I mean I would like to buy both sensor but I don't know if there is any diference between them...
Thanks!
thx bro
Have you changed the upstream sensor ? I can't get it out there's no room to take it out I'm hoping you have
Dude great video. Just curious to know which you got, if non original or original and if non original what name brand and again thanks for sharing this video. ✌
Denso
Thanks
I drive my friends (2008 Lancer) sometimes and i find it doesn't coast as well as a few years ago. Meaning, i have to give it more gas to get it moving and to keep my foot on the gas or else the Lancer quickly slows down. Its very irritating to drive around in a stop and go traffic. We have so many traffic lights here. So if i change the (o2 sensor), that should fix the problem?
Joe Mel i dont think so maybe u should clean the mass air sensor. And the throttle.
Ok, thank you very much. i found a website explaining how important it is to clean. And it explained the PCM computer board that controls so much. i was thinking about how to increase the throttle but all modern cars can not be set manually, haha. Cleaning is all i can do for now
I have the same issue, ive cleaned the throttle,cold air intake and replaced the MAF sensor an nothings changed so I just just step on it more in stop n go traffic 😅😂
Which one is B1 S3? Is that the one that's in the catalytic converter?
Yes
Hey. My wife has a 2013 mitsubishi lancer ralliart and the mitsubishi dealer said there was a problem with the b1s2 sensor. From what I understand, that's the bank 1 sensor 2, so downstream. Is that cable actually going from after the cat to the passenger seat? Thanks.
Yes
@@irvingpozo7167 Is it UNDER the passenger seat? If so, is it hard to plug/unplug? Do I have to remove the seat? Thanks for the quick answer!
@@David-mw5sd no you dont have to take the seat off just slide it all the way back lift the carpet n you will the wiring
@@irvingpozo7167 Alright and I'm thinking of buying a cheap o2 sensor part. Here's the link : www.rockauto.com/en/catalog/mitsubishi,2013,lancer,2.0l+l4+turbocharged,1505480,exhaust+&+emission,oxygen+(o2)+sensor,5132
I'd get the "ULTRA-POWER 2344114" since it's only 30$... What do you think of cheap parts like those? Thanks a lot btw for the help... Life changer I'll be able to change it by myself.
What was the make/ part number for the middle O2 sensor ?
2008
xxSILENCIOx not to sure the part number just Google it
Hey man
I have a misfire in my 2010 lancer gls and I think it's the o2 sensor because I changed and cleaned everything else from sparkplugs to injectors and everything. At low rpm the car starts to vibrate and I don't know what the hell is wrong?
My car vibrates too I have to change the motor mounts, but for u idk what could be the issue can be. Maybe you should clean the fuel with the cleaner u put in ur gas tank.
Which one is bank 1 sensor 1?
You figure it out??
Which one was the bank 1 ?
Darnell Bryant the one past bank 2 downstream
Hey good video which code you got ?
Where is bank 1 sensor 1
Can I please have a picture of where the sensor in the front connects to up in the engine bay? I can't find it anywhere I could really use a hand please. Thank you I appreciate it :)
@irving pozo
Send me ur email
Irving Pozo hey brother im having the same problem, cant find bank one sensor one. Any help is appreciated!!
@@irvingpozo7167 matthewrajnert@gmail.com that is my Gmail I'd really appreciate if you could send that photo :)
@@Prototype_TB ima make a new video showing all o2 sensors
Where is o2 sensor bank 1 sensor 3