I highly trust your reviews and opinions. I don’t care if they gave it to you. I’ve watched your bike reviews, and you’ve never been afraid to tell us if the bike sucks, or if it’s lacking features or quality.
One tip for drilling sideways and using the coolant - drill a hole to the lid for a tubeless valve and slightly pressurize the tank so it'll flow better. Don't go crazy, a psi or two will get you going 😅
Nice machine, I watched another PA TH-camr (Diesel Creek) use one of these while building a 2000 lb steel workbench. It looked useful and much safer than using a drill that would kick back on you and try to break your wrist. (don't ask). Merry Christmas and Happy New Year to you, Jen, Gus, and Turbo!! I can't wait to see you guys' 2024 adventures!
Those are the speed bits and leave a little center piece afterwards! Coolant tank is cool, they probably lost ours or threw it away! The speed bits work great especially with cutting oil! I- beams drill great too! Thanks for sharing and MERRY CHRISTMAS to you, Jen, Gus and Turbo! I hope y’all enjoy the Christmas Day! Much love and prayers to yall and your families! Kirk from Louisiana! 🎅🏻🎄🎅🏻👏🏻👏🏻👏🏻🙏🏻🙏🏻🙏🏻👌🏻👍🏻👍🏻🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸
Vevor also makes a 20L moonshine still for your kitchen pleasure, after the job. I would give it a 'giant thumbs up',, but that would be illegal, here in the US.
drills are a must have I am a cert welder and keep one in my truck they can get pricey way better then wapping out holes happy holidays every one keep the views coming love them your fan from MI
Good thing! They are so much lighter these days, I’ve used them for many years. Best tool is the broach type bit, retracting centre point and aggressive mill tool for plug holes type drill. Lots of coolant. Only downside is, we have to clamp some mild steel on the stainless to drill haha.
YOOOOOOOOOOOOOOOOOOOOOOO. This one feature sold me: 3:14 Didn't realize you could adjust the height!!! That is BRILLIANT. Update: Just bought it. $339 on amazon with the 6 bits, the adapter, and the drill chuck. I'm pumped for this!
I use these all the time at work, they are great! Just remember that if your drilling on a vertical surface always have a safety rope tied off to the handle so if the power cuts out it wont drop on your foot or someone underneath you. Merry Christmas to you Jen and Gus!
Thanks for making us a video during the holiday! I know how hard it is to put out the (what you consider) good/long form content so thanks for this to tide us over until the next one ✌🏻
Over 30 years ago I was a Machine design engineer for a press builder. The frames of many of the components were 3.5 inch steel Blanchard ground on both sides. In the design process we planned the location of holes needed in these frames and the machine shop used our drawings to put the holes in as specified. Of course changes were enquired once the equipment reached the assembly floor. The millwrights would use a very heavy BUX magnetic drill to add or modify holes in those instances and would always put a safety strap attached to an over head crane. Much time was saved when a precise perpendicular hole was required.
Хорошая вещь! Особенно удобно использовать ее для сверления отверстий в рамах грузовиков...при ремонте или переделках..Интересное решение сверления,для уменьшения потерь на трение высверливается не все тело,а только цилиндр.
Hej! I commented before while at work , you have the bits! These are WAY cheaper than the ones we ued 20 years ago , i hate them as too heavy! Rather get my steel delivered after laser cut and all holes done!!! We dont have time to muck about with ALL the available tools , laser and water jet cutting has revolutionised fabrication plus CNC bending too.
Hey there Chris and Jen. Merry Christmas to you two! 🎄✨. I can see that the Mag Drill definitely would come in handy! Too bad that the adapter has so much run out.
Thats ANY drill press and any mag drill with a chuck , no issue once you start drilling as it centres and off you go , its no issue whatsover and NORMAL poor quality chucks EVERYWHERE unless you find an OLDE ENGLISH one!
Tell me about using a strap........................Union safety mens we HAD to use straps even if it meant a crane was employed over to secure on big jobs as when power fails the mag drill/slogger drops onto you. Rebuilding a plate glass furnace we had one up high , night shift , the generator/s cut for a second , so lucky my Bro=Inlaw not hurt! UNION job! Australia!
I’ve been waiting for you to get one Chris, we had two of them at our shop and we used them all the time! You can even drill holes upside down brother! The magnet is awesome!
I’m looking for an affordable table top drill press now or a 110v electric motor with a 1/2” keyed shaft! I’ve been searching the internet and they’re not cheap! My motor lost power and I thought it was the capacitor and bought a new one but I think it’s in the winding! Still searching brother! I love you workshop, lost mine in 2020 to two different hurricanes here! Took down 11 trees and all of my fences and I had to put up a makeshift fence for my three pit bulls! I’m so glad we survived but the destruction was so devastating and depressing! I haven’t been in my mancave since! I used to make hunting knives but I can’t get motivated enough to start again my friends! It’s heartbreaking! Thanks for sharing Chris, if it weren’t for you and your family, I don’t know what I would do with myself these days! My hobbies are gone now and I’m too old to do anything else! I haven’t ridden my Harley Davidson motorcycle since the hurricanes either! I’m charging the battery now and going to try hopefully tomorrow or next week! Good luck you two heroes of mine! Lots of happy energy for you guys! Tell Jen and Gus and Turbo hi for us here in Louisiana my brother!
Merry Christmas Chris Jen, Gus and Turbo may your day be warm and full of love.. take care thanks for sharing.. see you soon have fun...it is what life is about!. may your New Year be the best ever!!.
Funny, I had never heard of "Vevor", before today....and it was not your channel. It was "Mortske Repairs" earlier on his latest upload where he poo pooed the brand with regards to a hydraulic lift tube for his tilting trailer. It was toast in less than a year....with little use. Check it out. The episode with the short box Dodge ram 1/2 ton.
It wasn't the same brand but a magnetic press like this saved my bacon on a snapped head bolt in a Chevy water jacket hole by drilling a perfectly straight hole for the "easy out"
Very nice piece . I don’t often use a drill press . But when I do it really comes in handy . I have 2 drill presses . One large one that sits on a table . One I got from my dads place after he died , it is a smaller craftsman but a nice one . None of mine have reverse like yours . My dad had a 5 gal bucket full of taps . All from probably 1/2 to 3” . I left those there for my brother . He may have sold them for scrap , who knows .
Thanks Chris Merry christmas to you Jen Gus and family plus many more. Always remember life is not just a job its an adventure so remember to have tons of fun living it eli in Ct.
Excellent video Chris :) nice tool and think should be out for years too! Merry Christmas, Happy New Year 2024 Ahead too also hope Santa Clause brings lots goodies too enjoy to and share too!
I highly trust your reviews and opinions. I don’t care if they gave it to you. I’ve watched your bike reviews, and you’ve never been afraid to tell us if the bike sucks, or if it’s lacking features or quality.
Always the best at reviews!
Absolutely agree! Honest opinions, really good reviews ❤
One tip for drilling sideways and using the coolant - drill a hole to the lid for a tubeless valve and slightly pressurize the tank so it'll flow better. Don't go crazy, a psi or two will get you going 😅
Vevor stuff is surprisingly good and very affordable, I've been very happy with what I've got from them.
That’s the most efficient use of garage space I’ve ever seen!
Nice machine, I watched another PA TH-camr (Diesel Creek) use one of these while building a 2000 lb steel workbench. It looked useful and much safer than using a drill that would kick back on you and try to break your wrist. (don't ask). Merry Christmas and Happy New Year to you, Jen, Gus, and Turbo!! I can't wait to see you guys' 2024 adventures!
I own this one for a year and it truly is amazing!! Great demonstration!
Great review, mag drills definitely are handy. Snagged a NNKH hat from the merch page and really liking it!
Thanks so much for the order! Glad you like it
I can smell this video! We used mag drills daily doing iron work at the fab shop! They are a game changer!!
Those are the speed bits and leave a little center piece afterwards! Coolant tank is cool, they probably lost ours or threw it away! The speed bits work great especially with cutting oil! I- beams drill great too! Thanks for sharing and MERRY CHRISTMAS to you, Jen, Gus and Turbo! I hope y’all enjoy the Christmas Day! Much love and prayers to yall and your families! Kirk from Louisiana! 🎅🏻🎄🎅🏻👏🏻👏🏻👏🏻🙏🏻🙏🏻🙏🏻👌🏻👍🏻👍🏻🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸
Merry Christmas Chris and Jen! 🌲
Merry Christmas!
Vevor also makes a 20L moonshine still for your kitchen pleasure, after the job. I would give it a 'giant thumbs up',, but that would be illegal, here in the US.
drills are a must have I am a cert welder and keep one in my truck they can get pricey way better then wapping out holes happy holidays every one keep the views coming love them your fan from MI
Nice setup! This company is doing great with their products 😊
Thank you for taking your time and showing us Chris. Really appreciate you
My pleasure!
Looks like a great tool. Thanks for sharing your experience with it. Appreciate ya
Diesel creek has one. They are badass. Merry Christmas 🎄 to you and your wife.
Auto cooling is cool
Merry Christmas to you as well!
Chris we had a similar style drill to drill thru rail on rail road worked by hydraulic pump we had those bits crack easy and are expensive be safe
Good thing! They are so much lighter these days, I’ve used them for many years. Best tool is the broach type bit, retracting centre point and aggressive mill tool for plug holes type drill. Lots of coolant. Only downside is, we have to clamp some mild steel on the stainless to drill haha.
Merry Happy! Look forward to seeing you in the New Year!
I like and buy Vevor products.
is it a cooincident that matt over at doesel creek just reviewed a mag drill yesterday?
Merry Christmas to you guys !
YOOOOOOOOOOOOOOOOOOOOOOO.
This one feature sold me: 3:14
Didn't realize you could adjust the height!!! That is BRILLIANT.
Update: Just bought it. $339 on amazon with the 6 bits, the adapter, and the drill chuck. I'm pumped for this!
First time I saw one was the movie "Thief" with James Caan and drilled out a safe
Not a bad drill. Merry Christmas for yesterday. It's now Boxing Day in Australia.
🌏🇭🇲
thanks for the video. Love what you have done with your shop.
I use these all the time at work, they are great! Just remember that if your drilling on a vertical surface always have a safety rope tied off to the handle so if the power cuts out it wont drop on your foot or someone underneath you. Merry Christmas to you Jen and Gus!
240 dollars is a deal.....I'm getting one😊
It’s great that this mag drill comes with a safety strap and slots to slide it through.
Heck yeah I’ve been wanting to pull the trigger on this unit
I've got the 1400W version of that - just got it a couple weeks ago. It's killer!
Thanks for making us a video during the holiday! I know how hard it is to put out the (what you consider) good/long form content so thanks for this to tide us over until the next one ✌🏻
Over 30 years ago I was a Machine design engineer for a press builder. The frames of many of the components were 3.5 inch steel Blanchard ground on both sides. In the design process we planned the location of holes needed in these frames and the machine shop used our drawings to put the holes in as specified. Of course changes were enquired once the equipment reached the assembly floor. The millwrights would use a very heavy BUX magnetic drill to add or modify holes in those instances and would always put a safety strap attached to an over head crane. Much time was saved when a precise perpendicular hole was required.
Mag drill is the only way to drill frame holes!! So easy!!! Worth the money by far!!
You can figure out your drill speed by the chips it’s throwing off.👍🏻
I got one of those for Christmas! I am playing with it while I watch your video. I am stoked to have this in the arsenal.
Merry Christmas & thanks for what you do!
$411 is an absolute steal. My company buys Hougen brand mag drills. Pretty sure they pay like 2k a piece for them.
Merry Christmas 🎄🎄🎄❄️☃️⛄⛄ Chris and Jen and Gus and Turbo 🎉
Those bits are called annular cutters in particular
Nevermind you said it at 5:54
Windshield washer fluid works great for cooling drill bits and they cut better.
I’ve got an old ingersall Rand drill, drilled a lot of armor plate with it the cooling is a must drilling for a long time
Thanks for expanding my knowledge of available tools for tough jobs....wm
Merry Christmas to you, Jennifer & Gus!
Хорошая вещь! Особенно удобно использовать ее для сверления отверстий в рамах грузовиков...при ремонте или переделках..Интересное решение сверления,для уменьшения потерь на трение высверливается не все тело,а только цилиндр.
Stay safe and we'll see you next time. Merry Christmas to the whole family.
Thank you for your touch on reviews. I was just thinking of putting a Guage on the end play. When you mentioned it.❤
Of all the YTers that claim an unbiased opinion, you're one of only a handful that I believe. Merry Christmas to you and Jen.
Hej! I commented before while at work , you have the bits! These are WAY cheaper than the ones we ued 20 years ago , i hate them as too heavy! Rather get my steel delivered after laser cut and all holes done!!! We dont have time to muck about with ALL the available tools , laser and water jet cutting has revolutionised fabrication plus CNC bending too.
Hey Chris I hope you and Jen plus Gusman had a great Christmas.
Excellent presentation. WOW your garage looks amazing…I need one.
Yes all the best to you and Jen and the Gus man cheers
hey thanks for the ornament! never miss a show.
Appreciate ya!!! Merry Christmas
Couple days late but Merry Christmas to you Chris, Jen, and little Gus Man. Hope you guys enjoy. Thanks for all the content this year.
We first called them Sluggers/Sloggers due to the slug!
Merry Christmas Chris. Hope you got some good gifts.
Chris is a simple man, makes millions on TH-cam and spends it all on tools lol. I love it.
Can never have enough tools!
Hey there Chris and Jen. Merry Christmas to you two! 🎄✨. I can see that the Mag Drill definitely would come in handy! Too bad that the adapter has so much run out.
Merry Christmas man!
Thats ANY drill press and any mag drill with a chuck , no issue once you start drilling as it centres and off you go , its no issue whatsover and NORMAL poor quality chucks EVERYWHERE unless you find an OLDE ENGLISH one!
Tell me about using a strap........................Union safety mens we HAD to use straps even if it meant a crane was employed over to secure on big jobs as when power fails the mag drill/slogger drops onto you. Rebuilding a plate glass furnace we had one up high , night shift , the generator/s cut for a second , so lucky my Bro=Inlaw not hurt! UNION job! Australia!
I’ve been waiting for you to get one Chris, we had two of them at our shop and we used them all the time! You can even drill holes upside down brother! The magnet is awesome!
I’m looking for an affordable table top drill press now or a 110v electric motor with a 1/2” keyed shaft! I’ve been searching the internet and they’re not cheap! My motor lost power and I thought it was the capacitor and bought a new one but I think it’s in the winding! Still searching brother! I love you workshop, lost mine in 2020 to two different hurricanes here! Took down 11 trees and all of my fences and I had to put up a makeshift fence for my three pit bulls! I’m so glad we survived but the destruction was so devastating and depressing! I haven’t been in my mancave since! I used to make hunting knives but I can’t get motivated enough to start again my friends! It’s heartbreaking! Thanks for sharing Chris, if it weren’t for you and your family, I don’t know what I would do with myself these days! My hobbies are gone now and I’m too old to do anything else! I haven’t ridden my Harley Davidson motorcycle since the hurricanes either! I’m charging the battery now and going to try hopefully tomorrow or next week! Good luck you two heroes of mine! Lots of happy energy for you guys! Tell Jen and Gus and Turbo hi for us here in Louisiana my brother!
chris make sure you buy a chain with a locking D ring if plug gets kicked and power goes off its falling
Merry Christmas Chris Jen, Gus and Turbo may your day be warm and full of love.. take care thanks for sharing.. see you soon have fun...it is what life is about!. may your New Year be the best ever!!.
Just one thing when using upside down make sure it is tied off and do not use cutting fluid as it will short motor out by experience.
I have a old Mag drill I got 20 years ago ish I hardly use it but when I need it it's great to have
merry xmas dude
Funny, I had never heard of "Vevor", before today....and it was not your channel. It was "Mortske Repairs" earlier on his latest upload where he poo pooed the brand with regards to a hydraulic lift tube for his tilting trailer. It was toast in less than a year....with little use. Check it out. The episode with the short box Dodge ram 1/2 ton.
It wasn't the same brand but a magnetic press like this saved my bacon on a snapped head bolt in a Chevy water jacket hole by drilling a perfectly straight hole for the "easy out"
Cool tool! I do not need it but I want it!
Thanks, Chris, for another interesting video…always enjoy your product reviews! Happy Holidays to you, Jen, and Gus!
Very nice piece . I don’t often use a drill press . But when I do it really comes in handy . I have 2 drill presses . One large one that sits on a table . One I got from my dads place after he died , it is a smaller craftsman but a nice one . None of mine have reverse like yours . My dad had a 5 gal bucket full of taps . All from probably 1/2 to 3” . I left those there for my brother . He may have sold them for scrap , who knows .
Vevor makes good stuff, they also have a paint gun that is top notch for less than $100
I have an old Milwaukee brand magnetic drill press. Thing is real good. Great tools
It'll be in a fast and furious movie when they rob somebody 😂
Thanks Chris Merry christmas to you Jen Gus and family plus many more. Always remember life is not just a job its an adventure so remember to have tons of fun living it eli in Ct.
Merry Christmas to you two😉
Возможно это использовать как фрезу,если заставить
двигаться относительно поверхности.😉🤝
Shops looking 👀 great
Merry Christmas, great channel thanks for all your advice
👍👍👍👍👍wicked machine effortlessly merry christmas to u all
Merry Christmas to you, Jen and the fur babies. Fabulous mag-drill review.
Vevor is becoming popular, I just watched a video on there tents and diesel heater, there's a lot of different products with the name.
G`morning Gus
Merry Chrismas NNKH
Sweet review bro!
Mr NNKH, thanks for the Christmas video, Jen and Mr NNKH merry Xmas regards Rob
Hope you, Jen and Gus have a great Xmas. Thanks for the content - one of my favourite channels, along with your main.
These are great informative thing for thickos ,like me ,good stuff lad 😊
Trying to hold and push on the drill sucks Chris, especially thick metals or any material! Thanks 🙏🏻👏🏻👏🏻👏🏻
Like it thanx Chris excellent 😊
Merry Christmas to you Chris, Jen, Turbo, and of course Gus!
Thanks Chris that's an awesome tool six stars brother
Great tip, thanks
Cool tool...Cooler Gus.
Good instructional video
Good job Chris
Hi wishing you all a merry Christmas and a happy new year 👍🐝🎅☃️🌲🦌
You stay very lean, i admire that😊
Great drill, nice review. More importantly. Happy Holidays to you, Jen, Gus & Turbo❗ ☃🎄❄
Excellent video Chris :) nice tool and think should be out for years too! Merry Christmas, Happy New Year 2024 Ahead too also hope Santa Clause brings lots goodies too enjoy to and share too!
Could you do a review on the pcy electric bike. I have seen lots of ads but it would be good to see what you think of it first
Good video. That is a really sweet vise mount you have in service there. Merry Christmas to you and yours.
Thanks!
Thanks man!
I had 12 broken bolts in a tractor frame. This drill made the removal job bearable..
Good.job cool Drill Happy.new.year
Well maybe Vevor will see your video and say, HMMM he has a point