How to rebuild a Marvel Schebler Carburetor for your older Tractor | International 2400B, 454, 464
ฝัง
- เผยแพร่เมื่อ 9 ก.ย. 2024
- I need to rebuild the Marvel Schebler Carburetor on an old International 2400B Tractor. This tractor is the construction version of the International 454 and 464. It has the C-157 gas engine. I'm using the economy kit from Steiner Tractor because I really only need to replace the gaskets and seals. This process is pretty much the same on most models of the Marvel Schebler carburetor. There are some small differences between models but the basic process is the same.
The Super Clean sample pack giveaway ends on 6/24/23. Leave a comment and let me know what you could use some Super Clean for. One comment will be chosen and the winner will receive a sample pack of Super Clean Degreaser. The winner will receive a spray bottle of Super Clean as well as a can of foaming cleaner. This offer is only valid for the lower 48 states. You must have a valid US mailing address in the lower 48 states to win. A comment will be chosen at random on 6/25/23 by Hayley and the winner will be contacted through TH-cam. Please make sure you have an email address associated with your TH-cam account.
Check out all the products from Super Clean - superclean.com/
-- Affiliate Links to Products Used --
Carburetor Cleaner - amzn.to/3WUIsHy
Super Clean Degreaser - amzn.to/3P2brHK
-- Visit My Website--
www.homebuiltw...
-- Check Out My Handmade Guitars --
www.hayleyguit...
-- Save 10% and get some awesome CA Glue from Starbond --
bit.ly/2WJmxbL
-- Ways To Support HBW --
www.homebuiltw...
-- My TeeSpring Store --
teespring.com/...
-- Check out my Amazon Shop --
www.amazon.com...
-- Join the HBW Built not Bought Facebook Group --
groups/homebuiltworkshop/
-----Connect on Social Media-----
/ homebuiltshop
/ homebuiltshop
/ homebuiltshop
/ homebuiltshop
----- My Mailing Address -----
Home Built Workshop LLC
P.O. Box 84
Peyton, CO 80831
Please remember when using tools of any type, there is the potential for injury. You are responsible for your own safety. Make sure you know how to use your tools properly, work at your own risk, be safe, wear your safety gear, and most of all, have fun!
#marvelschebler #supercleanteam #homebuiltworkshop
Watch her do this job a try again. You stuffing parts where they don’t go.
Yep the gal from Steiner Tractor Parts.
Super Clean looks like it would be perfect to clean up the walls of my aluminum storage shed.. I am in the lowest of the 48 here in Florida, so mold build up on out buildings is expected. Great work on your part with the carb rebuild.
Thanks! Its running great now.
I use eyecrometers too. I have calibrated and uncalibrated. Lol!! Good work on that carb.
That Super Clean would help you initially clean the pressure washer you need to look at. I could use it to clean my 2 cycle stuff - leaf blowers & chainsaw. My chainsaw case is filthy inside.
I used the uncalibrated ones. My calibrated set was dirty. Lol
Congrats Dave, Your comment has been chosen to receive the Super Clean Giveaway. Be sure to check your email/messages for further details.
Super clean works good.
Also check float for hole, it will be heavy with gasoline.
Old trick is to add a small dab of grease to hold the gaskets in place while you assemble
I've done that before if one is being particularly stubborn.
How about carburetor on Gasoline International 656.and I thing it had a wire going to it so am looking to see what that's got to do with it also.. Please respond with a video if possible please.thank you And God Bless you Brother
I don't have a 656 to show you the details on but I believe the rebuild process will be very similar to this one. I don't know if it has the Marvel carb or the Zenith carb. The process is similar. I'm not completely sure but I believe the wire on your carburetor is for a fuel shutoff solenoid. See if you can find the identification numbers on your carburetor, and I'm sure you can find some diagrams online. You can do it!
I'm gonna go listen to some SPRAYER! They're that one 80's thrash metal band. Right?
Yes, lol. Sprayer rocks. 🤘
What was the model number on your carburetor?
What is the number on your carb?
Why have I just spent 22 minutes watching this? This brand of tractor us not sold in this country and I live in a city centre.
Thanks for watching it! I appreciate it.