TIG Welding Titanium Fabrication - Oil Flask
ฝัง
- เผยแพร่เมื่อ 29 ม.ค. 2020
- Watch "This Old Tony" make the threaded bung and most of the filler cap for me in this video:
• Turning Titanium: Tria...
Buy fun "weld-it-yourself" kits here: artisan-alloys.myshopify.com/...
Parts like these don't need to be back purged if you can control your heat and not burn the whole way through. It's a non-structural part, so the welds don't need to be super strong.
Oil needs to be mixed with the gas on 2 stroke carbureted engines. With a flask like this, you can ride to the gas pump, fill the bike up with gas, and then add the proper amount of oil by measuring with the syringe.
Watch "This Old Tony" make the threaded bung and most of the filler cap for me in this video:
• Turning Titanium: Tria... - บันเทิง
never thought I'd say this to a guy (again) but: nice can!
also... TIG BUTTON backcap @ the torch?!
Hi Tony,
This torch is a "Prostar 24" model. It's great for DC welding at low amperages. It doesn't have a back cap, the collet is tightened by tightening the collet body (gas lens). It's great for getting into tight places (I used to use it a lot for welding stainless exhaust headers), and it's nice and lightweight.
(These parts you made fit perfectly, thanks again!)
This was my first thought too- where’s the backcap? Thanks for the info 6061!
This is my first 3 way with T.O.T. and 6061... I don't hate it. If A.V.E shows up, I'll tap out because 3's company and 4's a crowd.
I thought you'd say this to a guy (again).
Global Eco Tec - Ritter ohne Furcht und Tadel From what I remember from Tony’s video, it’s called a “bung ”.
If that flask was for sale, it would already be in my back pocket. Gorgeous fab work mate!
Hate to brake it to you bro. But you're not a welder. You're an artist, a master of your craft.
Dork
now i get it when this old tony says he's bad at welding. this is amazing
Awesome looking flask!! I've been looking forward to seeing this side of the build, since This old Tony did the bungs and most of the caps! Looks beautiful!
The ToT-anium bung and cap threads worked great. He did a perfect job.
The fact that you’re left hand it makes it even more badass
Amazing how bright the sparks are off of titanium. Looks like burning magnesium bright. Very cool build.
It is. Titanium is actually rather dangerously flammable itself, if the right conditions are there. The dust is especially dangerous. And like any burning metal, you cannot put it out - class D fired are no joke. Do be careful if you ever work with titanium- know what the proper procedures are and follow them. :)
Great to see those ToT parts being used! Great welding.
Awesome. I’ve been looking forward to this ever since ToT’s video
That scene at the end looks like ToT riding off on his bike
Another spinning tire made me really happy^^
Ah, the ol' manual rev limiter. Yep, done that one a time or five.
When hes grinding those edges @5:40 those sparks are as bright as a welding flash! That's how I learned I was grinding something that was titanium that I thought was aluminum before I started.
Really like your videos on welding aluminum thanks.
Such a cool looking oil flask
Love that "indicating" in with random taps!
Abom does not approve!
Love the rev limiter finger. I do the same thing. Too funny. Love all your videos.
Yup. I officially NEED to order a TIG button.
Salut, franchement super boulot, et toujours avec humour!!! Tu est le roi de la soudure. Great job. Thanks
These would be cool kits to buy and weld up yourself.
Nice work mate 🙌🏼
Nice work!! Wish that tig button wasn't soo expensive, would have bought one already..
Sweet. I will be making stainless headers for a turbocharger install, that GTAW button will definitely be the trick
Wow what a fantastic skill to have..imagine then create!!!awesome man!!!!
That thing will still exist when oil has run out
Then it’s time for a wash and refill with Knob Creek.
Might need to make one of these. Hopefully they don't try tip my "oil" out next time I bring one into a night club
😂😂😂
10:15 the revs from that husqvarna HAHAHAHAHAHAH!! Awesome oil flask
those bright white sparks are nice when grinding Ti
I got SOOO excited seeing this! I thought you were going to fill it with some good bourbon or scotch when you were done. :-( Oh well. Almost as good. Gorgeous work as always.
Will he ever speak hahah thanks for another great build
If we could stay on this kind of upload schedule, that'd be great... Lol
Hunter Broadhead right? 😂 it’s like one video a month and then like 5 in two days
Make a lovely hip flask, I'd buy one!
Nice as always
Nice working
Nice Can, also top marks for the variable tig trigger button
Look sooo clean 👌
i can weld, but I'm not great at at fabrication...but if i was, i could make all kinds of cool stuff for motorsports. awesome video as usual💪
... that can get better only by experience. For example i don't have welder so i cannot even get any experience.
4:14 this robot has no fear
two-stroke engines are cool
joins of machining titanium stuff thats tough as nails
Curious what the bulk of your business is? Always wondered what keeps the lights on. I know it isn't titanium flasks! PS Loving all the new uploads.
Cheer!
IMPORTANT- Please read the entire video description before commenting, thank you.
All welding/fabrication questions are answered at www.6061.com
If you are a website subscriber, feel free to email me with any questions regarding this video (welder settings, etc...)
Thanks for watching
You might want to pin this comment. It's too easy to miss otherwise.
I love welding titanium.
At the end, the video appears to be intentionally cut short. I'm sure there was a nasty sound after riding into the night with a welding helmet.
Nice, bro!
Nice Husky!
This is not just welder it also lathe machine 😊
Castor 927??? love the smell of that stuff!!
Mantap PAK...TEMPAT OLI SAMPING...nya👍👍👍
Good skill I will learn to do like you when grow up
lol love the outro :)
Daft Punk of welding!
This is weird..........stopped at a local welding supply shop, Lefeld Industrial & Welding Supplies Greenville, OH to look Milwaukee Fuel 18 cordless tools. As I was leaving I went over and looked at the welding and brazing equipment. Last time I tried welding was in high school. About the time you'd strike an arc some numb nut would reach underneath the welding booth and crank the dial to the max and throw the lever from low to high. So when you touched your welding project there was a small thermo nuclear explosion and your project was a molten blob below the grates. An hour after the welding store I suddenly come across your TH-cam video. Thought about welding or learning how when I was in the store. Been a long time since I tried welding. Graduated high school in '81.
Well done
You're doing metal work for living or for just as a hobby? Grate video as allways.
Hi. Since you did not back purge i hope you cleaned out all the titanium oxide. Because in the 2 stroke oil that oxide is not really advantagous. Looks very cool that little thing.
Nice job :D
Love my TIG button!
really good!
Did you have the pulse setting on ? Or were you just turning it on and off by hand ? I use a micro switch on my TIG machine, I never use the pedal to much going on at one time. Any way that came out awesome!!
Where did you get the original aluminum cap and bung? I THINK they're the perfect size for my Formula F Honda's tank, and I haven't been able to find the supplier.
you got skills
Nice video,
This should cost $100 not that damn yeti crap
Well done bro. You make it look easy
Nice work! The colouring gives it a nice look (although it hurts a bit to see welders intentionally provoke the formation of alpha case 🥴)
Why does it bother you?
The nice blue colour is alpha case which is detrimental for the strength of the material and particularly the fatigue properties as it is prone to inducing cracks. Obviously, the flask isn’t a critical structural component. Just as 6061 pointed out in his video description. My comment was with “the glimpse in the eye” (at least that was my intention 😊). In aerospace business, blue colour = fail. Non structural components, blue(purple, pink tone) = nice and decorative 😄
@@andreaslundback is that the case with Titanium? I know, as a welder, that steels and stainless' colours aren't great, but I wasn't sure about titanium, or inconel, monel, etc...
is that a hand control for the argon? seems like it was always coming on.
Thanks !
Is there another way to limit the revs other than the finger? I think not😁
not gonna lie, when This old tony made the joke using it as a flask with a wide mouth, I was aware he was probably joking, but now that i've seen the finished product, i kinda want one of these as a canteen.
Shame it's probably loaded with god-only-knows-what kinda contaminants that would kill me horribly, lol
I was thinking about making an oil sump and valve cover out of 0.5mm grade 5. I suppose it depends on design, but do you think it would distort too much upon welding. What you are welding here looks thicker, but it looks very stable compared to welding aluminium with regards to expansion. Have you made either of these out of titanium?
And here I thought I was the only one with a Rev limiting finger!?
It would be great to know what settings you were using for those perfect welds👍
Skill level = Maximum
Settings always depend on your skills
1.21 gigawatts
What is the liner made of? Rolled sheet for tight fit or ?
Hi. How much such nice things with shipping to Poland
how is welding titanium? is it anything like stainless?
is titanium tube always seamless?, just curious, gorgeous can btw.
All high end/grade/aerospace Ti tubing is drawn not rolled
Pretty sweet
Sweet!
Awesome 👌🏻
I just recently watched video that said if your titanium changes color when welding is a bad thing it means your weld is to hot and you are burning the titanium. Is this true because I see these high end titanium exhausts that look amazing with a whole rainbow of colors. Just wondering. Edit: titanium handles extremely high temps really well also not a welding just a dabbler haven’t done any tug welding either just curious.
were you just using straight water for coolant cutting the tube?
Hello, Can I weld titanium with TIG? Does it contain zinc and is it harmful titanium welding smoke ? I look at youtube and someone spoke about zinc which is very very harmful and please let me know how I can to weld titanium safetly and which metals is dainger to weld without air filter in welding shield.
Thanks
Perfect
Wow complimenti👍👍💪👏👋
what do you use as coolant?
Where can i buy the cap
tell me more about that switch on your torch
Nevermind, just ordered it :-)
super!
The amount of post gas for this must be bonkers
Nice 👍🏻
"oil" 😉 Suuuuure...
Maple sirup. From Hand tool rescue :D
And when are you holding classes?
can i use this for vodka?
I want that
Like making a peace of jewelry!
rev limiter finger... Very good saying :)
I don't even drink and I watched a 10:35 video of a flask...
take it over the top, engraving and coloring
SO dope 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
Rev Limiter Finger - LOL