Hey Stud Pack, if you have not yet checked the comments from the last video, installing the 3 inch conduit, you should look at the ones talking about a slip coupling below the meter box. I learned it the hard way on my house. After years the dirt settled and pulled the conduit away from the house. What a pain fixing that when it could have been avoided had I known better.
Not sure what part of the country you are located, but that detail is more of a cold weather issue and always driven by utility requirements. No frost heaves in the Houston area!@@dallasarnold8615
The problem with the nail fin is it pushes the window out making them look stuck on instead of adding depth by being inset in relation to the window trim. One reason new houses look worse than old ones.
At least you guys fix it when you mess up , construction work is easy to get wrong , there's a lot that can go wrong, I've a seen a thousand things that are wrong onsite and covered up by....... whoever ! Well in lads.
As someone who does framing and finish carpentry for a living… nothing to be ashamed of. Mistakes are made, and we learn from said mistakes. It’s great to see a builder who ACTUALLY made a mistake and goes back to correct but in the process shows and explains why it’s wrong and how it’s fixed. Cheers to you guys! Nice build so far StudPack!!
The problem isn't with people who make mistakes and learn from it. Inspectors exist because there are a lot of builders who make mistakes and don't learn from them.
@@jonperryman6477 Very true as well. Unfortunately in today’s construction era plenty of builders just want to fill their pockets and don’t care how projects are completed
I love it. Paul can't say "vulnerable" so he goes with "susceptible" instead. I remember in elementary school when we all had to stand up and tell a little about ourselves to the class. My classmate had a heavy Southern drawl and pronounced "oil" as "erl". Even after many attempts, the teacher was unable to get him to pronounce oil correctly and he was flustered. So he continued his story, saying "My daddy works on a PETROLEUM rig". The whole class burst out laughing 😂!
This is why we love you guys, I’m sure there are a few viewers that complain about seeing “the same thing twice” but I assure you guys it’s the vocal minority, when I watch you guys I KNOW that it’s almost always done right with attention to detail, and when it’s not I ALSO know you will show us where you made your mistake and how to properly fix it. It takes guts to show an error you made especially when nobody would have even known there was one off camera, this channel will always be known to me and many other viewers for its character as well as it’s craftsmanship and that’s a title you guys should be proud of.
This is what I love about this channel. You’re human and you don’t edit your videos to look like you’re prefect. We all make mistakes and they’re the best learning experience. So this is a great video for us all to learn from.
Great job guys. One thing you said was on the house you might step back the framing so as to make the liquid flash easier. Remember the edge of the zip is unfinished. The concrete will retain moisture and will wick up into the edge of the Zip. If you do that seal the edge of the Zip first and keep it off the concrete.
I had the same pella windows installed on my house, the same drain ports after the factory certified installers left, i found on of the port doors on the window ledge. They are very flimsy. When you are spending 2000$ per window, you expect manf get details like that right.
one of the worst things about modern social media and content creation is how content creators hide mistakes, failures, and other perceived negatives which are actually perfect teaching tools to learn from. this puts doubt into the minds of DIYers and newer people who want to tackle tasks on their own and in turn they give up a lot quicker since its demoralizing to watch a content creator do something "perfectly" the "first time" meanwhile less experienced people feel inept and are prone to quit a lot more quickly. massive props to you guys for not doing that shit. while the original install is considered a fail, you guys turned it into a teachable moment and passed on even more knowledge while showing people that even professionals are prone to making mistakes. again, props.
Based on the video, I’m not sure if the flanges are just an option for these windows. Depending on how the purchaser wants to install them, would dictate if they need the flanges or not. Was it a situation where the stud pack should have requested for the flanges, being this home is a new build? Or were these windows engineered to be installed only with the flanges as a new construction window. If that is the case, then I would agree with you 100% and the manufacturer should have shipped the flanges with the windows being they don’t want to manufacture them in the facility to avoid damaging the flanges on such a large window in shipping.
I hope this is the case where these windows were engineered and fabricated a certain way to only be installed as a new construction build, and need the flanges to be installed properly. Otherwise, I am hesitant to purchase replacement windows for my home because it seems they don’t hold up as well as windows with flanges.
You guys don’t hide the mistakes (that everyone else also makes occasionally, but pretends not to) and show us how to fix it. This is why this house is a great build and Stud Pack an even better channel. Without encouraging more mistakes the candour and honesty is what makes your channel. Keep it up!!!
Pella has been out there an awful long period of time to be discussing improvements to their instructions at this point🤬.....just a thought. Nice work guys as always!
I tell this to my guys all the time. There is no such thing as "Fail" = First Attempt In Learning. Really appreciate you guys not only showing what goes as planned, but the adjustments and "learning" you do on your minor mishaps! You guys rock!
If I’ve learned one thing through renovations, it’s that water can show up in places you never though possible. And it stumps you. And makes you nearly cry. Glad you were able to fix it!
Gotta say Stud Pack Gang; not only are you good builders; you're honest too. Some youtube builders would have just fixed it off camera and nevere admitted making a mistake. Home building is ALL about learning, making mistakes and then making it right. Cudos to the Whole Gang for standing up and helping us make things right. !!!
What I really appreciate is that when you mess up, you take accountability for it, and show how to fix it. Because in real life, people make mistakes all the time, especially on a new project... and the studpack house is work in progress. A work in progress is always going to be a learning experience.
I really appreciate the energy of the dad deferring to his son because it's his son's house. At the same time, the son is being respectful of his dad while still doing the "my roof, my rule" thing. The mutual two-way respect between parent and child is fantastic. If the youtube personas are sincere reflections of their actual familial dynamics, (I think they are) then that's a model family people can hope for, folks.
I think you should leave the sheathing hanging over the slab on the main house because water can’t possibly seap in through an overhanging seam. I know you’re going to liquiflash it but still, who knows what’ll happen to that in 20 years
😩 that’s sucks guys! I just can’t see how it leaked with how diligent y’all were with sealing. In true studpack fashion tho, y’all give the story how it is, good or bad, and totally humbled. Much appreciated!
It's amazing how you all can stay so positive through all the little mistakes, delays, and do-overs. Despite the setbacks, this garage is looking great!
What a bummer, having to redo those GIANT windows. Props to you gents for taking the time and making the effort to fix! Always disheartening when you find a mistake, but feels great once it's fixed!
Always bittersweet to do something over. You're not alone. I absolutely hate how all the higher end windows come with the fold out or snap in flanges, whereas the mid grade vinyls come with the massively superior molded flanges all the way around. I can't figure out why they do that other than maybe ease of shipping. I ran into some issues with some very high end Marvins where the top flange didn't even overlap like you show here. You could see daylight in every corner after install. They sent corner flashing pieces but no way I trust them long-term, which is unfortunate because my name is on the install. Knowing they weren't going to make any shifts in production solely on my account, I still had the rep come out and look so I could express my concerns. We had a minor pinhole leak in one window during gailforce winds and terrential downpours, but I could only add Lexel and trim and hope for the best, which I absolutely hate doing. Couple of notes- an old timer I worked with always set his window ROs slightly taller and put a piece of cedar clapboard on every sill before flashing tape and window install so that any water would automatically drain out. -Something I do with all my 1st rows of sheathing is wrap the bottom with a run of zip tape to completely eliminate wicking. For the future, you should really run your sheathing ~6" beyond your sill plate down past the foundation. -Lastly, you want to do the same with your bottom flange as you did with the top by having your bottom flange run long and behind your side flanges. Awesome video as always guys and I really appreciate and admire the transparency. Customers are surprised when I'm actually honest about issues when they ask how everything is going. I explain both the problem and solution and they always have a look of concern on their face right up until I tell them it won't cost them anymore lol. Then it's just a sigh of relief and appreciation.
one detail to consider on the main house is to zip tape the bottom of the zip sheets where they contact the slab, that way you have multiple layers of sealing protecting your siding. the zip tape handles protecting the sheathing, and the liquid flash protects the concrete to zip joint.
I have installed many many windows of many manufacturers and also worked exclusively installing for Pella for years. It is not uncommon to install windows without a nail fin ... like in an opening of a house covered in brick. They have a brick mold that snaps in to fill some of the gap but you still need to caulk of course. It still always made me nervous that they might leak over time. But in sunny California they seem to be fine. Always always put a nail fin on if you can. Pella also has adhesive flashing tape that is made for the left and right corner joints of the fin. . And yes ... always leave the bottom fin not sealed with caulk. Let that water get out if it does get in. And water test for at least 10-15 minutes. Sometimes it takes awhile before a leak starts to appear. When stucco or siding is on ... water test for 30 min.
Man wish these episodes where 2 times longer. - It looks like tinted windows from the streetview. Amazing job. And rain here even goes upwards and in circles.
I appreciate the Integrity. Keep it that way Gentz! I never comment on anything but, dealing with Contractors, etc... it's nice to see a builder that owns up to it. It helps us little guys too. Cheers.
Always show your mistakes, that's what makes your channel unique. There are hundreds of DIY carpentry channels out there where everything just magically fits together and always works perfectly. Those channels are heavily edited and don't reflect what really happens on the job site.
So glad the window is proud of the Zip. To be honest I think the salesman did you a favor, given the fact the window’s size and weight. Meaning you could install them from the inside with less “pucker” factor. Not sure why he didn’t include the flanges. Finally, I like that you’re building a house, with a Remodlers eye. A lot of builders don’t think five steps ahead when building.
The house will be very tight. Make sure you are getting the hrv/erv right. In the garage, make sure you have a way to move the air. If you start the car, fumes will linger around. Since your house is very tight, you might consider going rockwool rather than using spray foam which can be a headache. R value on the roof though might be an issue.
I noticed on the first window video that they were sitting in pretty far, and I thought maybe it was going to be brick. Your going to be thankful it leaked so now they are sticking out correctly for siding
love how you own up to your mistakes and correct them. Makes me wonder how much Bob Vila left on the cutting room floor so it looks like he did it right the first time.
For future planning: Before you start planting, rototill all of the beaten areas first as deep as you can. Also add compost or something else. Too many folks spend a butt load of money over many years after they plant grass trying to fix the problem of compressed soil. Or better yet just do edible trees and perennial plants front and back. Duplicate the multiple canopies that originally grew in Texas. Look up permaculture.
The windows might not have been watertight but one thing that always is, is you guys! ❤ Ready and willing to admit when mistakes/accidents are made, and even better: more than willing to show how to fix it when something happens
In life, I have learned to ALWAYS do it right! Integrity and pride in whatever you do and put your name on! Great job guys! Good to see these occasional flubs that educate and prove your not perfect advanced aliens!!
Thank you for sharing your challenges as well as your celebrations! It's so nice to actually see someone not only sharing perfection online. Keep doing you!
It the consistent showing and fixing your mistakes that make this channel so valuable! Like in so many things it's the details that get you intro trouble. Great work, I hope one day I'll be able to put it to use building my own custom home in the future!
Maybe it’s been said…, but it’s only a mistake if you don’t fix it. Your keen eye for detail and ability to explain these processes is phenomenal. Most of us are good at one trade and you guys are crushing all of them. See you on the next one.
I love how you guys show us your mistakes and how you fix them because those are probably some of the exact mistakes a “DIYer” would do. Excellent job on the garage and video fellas. Can’t wait for the next one.
I love seeing the mistakes as well as the successes! As a homeowner who will be remodeling, it is good to see where problems might happen so I can avoid the same issues you mentioned!
The most valuable lesson learned are the mistakes you made along the way taking accountability and fixing them is how you grow glad to see you guys doing that
How frustrating for you guys 😢 I do like how you keep it real showing all the bad with the good. It is hard enough building from the ground up but then you add filming it all for us. Thank You for bringing us along!
Great job guys!! I always look forward to seeing the new content and updates on your project. Keep up the great work! Looking forward to seeing the next video! 👍
There are many reason why I love watching the Stud Pack crew! One of the biggest reasons is your honesty and willingness to show us your mistakes. I’ve learned so much from watching you guys! Keep the great content coming!!!
I love that this video documents and repairs an installation snafu. That's good transparency, and it's also good education, because we always make mistakes in life. Thanks for that!
WOW that looks great ... I could really feel your 'pane' with the windows LOL. Another great video by the Stud Pack Crew! Can't wait to see what's up next! Cheers Paul, Jordan and Rad :)
I love that you didn’t fake it with the window installation. Man it could have been easy to just move on and not even mention it! But you didn’t! THATS INTEGRITY! You’re true to yourself and others about mistakes. We all make em and then go to TH-cam to learn how to fix them. This is a perfect example of that! That’s what makes me love this channel about! Seriously, I tell everyone about this channel! KEEP UP THE AWESOME WORK!
although, if you flush the zip with the slab, you won't be able to completely seal that downward face of the OSB... i think sealing that up so it can't wick up moisture is a really good thing. So consider that if you move the framing back. Great job guys!
Great video nice re-do on the windows. Sure want to fix that now and not later when you have the siding on and everything done. Just shows what great craftsman the whole Studpack team is. Great job.
I recommend just using Siga Fentrim tape over liquid flashing the sill on the main house. As you experienced, the liquid flash goes fast and it gets everywhere.
Another great show. Nice detective work, tracing back to the install error. When I replace my windows I’m counting on the lessons you guys learned, so I don’t make the same mistakes.
Its good to see you show some mistakes we all make them so many home improvement shows only the finished product like they did it perfect. Great job guys..
Paul, you are a classic!! Your knowledge, humor, and especially your work ethic makes me 'susceptible' to watching your channel. Keep on truckin', you're doing a fabulous job of building and instructing.
I love that you guys make good on your mistakes even if you don't REALLY need to. Your are perfectionists to the enth degree and I love it. I intend to follow this build to the very end and love every episode.
Guys - I enjoy your video. Glad to see you added the liquid flashing. One additional thing I would recommend on the ZIP sheathing is folding tape around the bottom edge and avoiding direct contact with the slab. It’s a lesson I learnt as it was a detail i missed and the ZIP rotted out in less than 3 years in Houston. The moisture wicks into that exposed edge if it’s touching the slab or rain is bouncing off the slab onto the edge. I can email you pictures of what happened if moisture is left to soak into the ZIP via the exposed edge then left to basically steam behind the siding in hot texas weather. All the best Iain.
i did something similar on a garage a few years back i had access to again (swapping a light fixture out). i wrapped the bottom edge of the sheathing in zip (in my case plywood). and that was sealed (similar to lexel but i forget which product TBH) to the sill plate and footer. in my case my dimpled housewrap is also taped to the bottom of the sheathing. but this means no extra step sealing below the installed sheathing with liquid flash or whatever. F that noise. Portland, OR, rainy AF, sheathing right above a concrete patio. no rot. bugs and mice inside because of the garage door. so good luck sealing that thing. ;-)
When sealing in conjunction with zip tape, always wipe zip tape backing with alcohol to remove release agent, it gives a better adhesion between the two.
It's so nice when people put their mistakes out there. I know it's not fun, but I learned something here. I knew it was weird that there was no nail flanges when you put the windows in, but I haven't put in a lot of windows. It's nice to have this info since I am starting framing on my first house in the spring. Now I know. Good job guys!
Absolutely awesome video!!! I love the fact that you owned-up to a mistake and in doing so you inadvertently created an opportunity to show everyone what happened and what you did about it. RESPECT!!! Keep up the great work.
absolutely incredible how fast you guys blasted into the universe ... It's been a huge delight and super educational being subbed all these years. well done gentleman!!!! Super happy for your success. I used to click LIKE on every comment on the vids ... now it takes days to do what took me 10 minutes. Cheeers guys
I learn just as much or more from your recovery from mistakes or oversights. Mistakes are a pain and I just as soon learn from your mistakes rather thane mine
I love the fact that when you make a mistake or something goes wrong you show us. That shows us that you will gladly admit when you make mistakes AND it teaches us so we don't make the same ones. LOVE IT. Can't wait for the next video.
Go watch Matt Risinger “five better ways to framing “he give us a good tip on how to finish the bottom of the house with that zip R bored. He shows putting a piece of treated lumber at the bottom of the zip board along the foundation, and then ceiling. You’ll have to check it out.
Good that you liquid flashed the bottom of the zip sheeting and the nail holes at the bottom row, though you are not required to do so it's good to liquid flash all the nailholes, if any nails have gone bellow the green layer they shoudl definatley be liquid flashed. The roof is also good to cover the nail holes though it depends on how your climate.
Thanks for watching Gang! Use code STUDPACK50 to get 50% off your first Factor box at bit.ly/3F55GCL!
Hey Stud Pack, if you have not yet checked the comments from the last video, installing the 3 inch conduit, you should look at the ones talking about a slip coupling below the meter box. I learned it the hard way on my house. After years the dirt settled and pulled the conduit away from the house. What a pain fixing that when it could have been avoided had I known better.
If the other two didn't leak, why not compare the difference in the windows? Seems like it might have been a manufacturing mistake in that one window.
Not sure what part of the country you are located, but that detail is more of a cold weather issue and always driven by utility requirements. No frost heaves in the Houston area!@@dallasarnold8615
The problem with the nail fin is it pushes the window out making them look stuck on instead of adding depth by being inset in relation to the window trim. One reason new houses look worse than old ones.
At least you guys fix it when you mess up , construction work is easy to get wrong , there's a lot that can go wrong, I've a seen a thousand things that are wrong onsite and covered up by....... whoever ! Well in lads.
As someone who does framing and finish carpentry for a living… nothing to be ashamed of. Mistakes are made, and we learn from said mistakes. It’s great to see a builder who ACTUALLY made a mistake and goes back to correct but in the process shows and explains why it’s wrong and how it’s fixed. Cheers to you guys! Nice build so far StudPack!!
The problem isn't with people who make mistakes and learn from it. Inspectors exist because there are a lot of builders who make mistakes and don't learn from them.
@@jonperryman6477 Very true as well. Unfortunately in today’s construction era plenty of builders just want to fill their pockets and don’t care how projects are completed
Very well said!
Bella windows are the worst
@@priceandpride These are Pella...
There is nothing more valuable than a builder that is willing to show you thier mistakes. Well Done.
And there is nothing better than making a spelling misssteak when pointing that out.
@@SkulxCrusherx
@@SkulxCrusherx
Huh?
@@ozziecrosby2092their not thier
Mistakes actually get more views on youtube.
I love it. Paul can't say "vulnerable" so he goes with "susceptible" instead. I remember in elementary school when we all had to stand up and tell a little about ourselves to the class. My classmate had a heavy Southern drawl and pronounced "oil" as "erl". Even after many attempts, the teacher was unable to get him to pronounce oil correctly and he was flustered. So he continued his story, saying "My daddy works on a PETROLEUM rig". The whole class burst out laughing 😂!
This is why we love you guys, I’m sure there are a few viewers that complain about seeing “the same thing twice” but I assure you guys it’s the vocal minority, when I watch you guys I KNOW that it’s almost always done right with attention to detail, and when it’s not I ALSO know you will show us where you made your mistake and how to properly fix it. It takes guts to show an error you made especially when nobody would have even known there was one off camera, this channel will always be known to me and many other viewers for its character as well as it’s craftsmanship and that’s a title you guys should be proud of.
This is what I love about this channel. You’re human and you don’t edit your videos to look like you’re prefect. We all make mistakes and they’re the best learning experience. So this is a great video for us all to learn from.
Great job guys. One thing you said was on the house you might step back the framing so as to make the liquid flash easier. Remember the edge of the zip is unfinished. The concrete will retain moisture and will wick up into the edge of the Zip. If you do that seal the edge of the Zip first and keep it off the concrete.
Recommend against recessing the Zip on the concrete pad - you want a drip edge at the corner to avoid wicking action on the edge of the OSB.
I had the same pella windows installed on my house, the same drain ports after the factory certified installers left, i found on of the port doors on the window ledge. They are very flimsy. When you are spending 2000$ per window, you expect manf get details like that right.
one of the worst things about modern social media and content creation is how content creators hide mistakes, failures, and other perceived negatives which are actually perfect teaching tools to learn from. this puts doubt into the minds of DIYers and newer people who want to tackle tasks on their own and in turn they give up a lot quicker since its demoralizing to watch a content creator do something "perfectly" the "first time" meanwhile less experienced people feel inept and are prone to quit a lot more quickly.
massive props to you guys for not doing that shit. while the original install is considered a fail, you guys turned it into a teachable moment and passed on even more knowledge while showing people that even professionals are prone to making mistakes.
again, props.
Man that’s BS! The manufacturer should take responsibility for this!!! Why the hell didn’t they send the fins with the units. 🤬🤬🤬
Based on the video, I’m not sure if the flanges are just an option for these windows. Depending on how the purchaser wants to install them, would dictate if they need the flanges or not. Was it a situation where the stud pack should have requested for the flanges, being this home is a new build? Or were these windows engineered to be installed only with the flanges as a new construction window. If that is the case, then I would agree with you 100% and the manufacturer should have shipped the flanges with the windows being they don’t want to manufacture them in the facility to avoid damaging the flanges on such a large window in shipping.
I hope this is the case where these windows were engineered and fabricated a certain way to only be installed as a new construction build, and need the flanges to be installed properly. Otherwise, I am hesitant to purchase replacement windows for my home because it seems they don’t hold up as well as windows with flanges.
You guys don’t hide the mistakes (that everyone else also makes occasionally, but pretends not to) and show us how to fix it.
This is why this house is a great build and Stud Pack an even better channel. Without encouraging more mistakes the candour and honesty is what makes your channel.
Keep it up!!!
Pella has been out there an awful long period of time to be discussing improvements to their instructions at this point🤬.....just a thought. Nice work guys as always!
I definitely fault Pella for not putting simple stickers on the windows saying that the installer needs to install the nail fins.
I am amazed that they claim they cant install the nail fins at the factory.
@@bhami Yeah, wtf is that? I'd be more than pissed.
Hey, my thoughts EXACTLY...
I tell this to my guys all the time. There is no such thing as "Fail" = First Attempt In Learning. Really appreciate you guys not only showing what goes as planned, but the adjustments and "learning" you do on your minor mishaps! You guys rock!
I’m stealing that fail thing from ya
@JediahCummins lol No kidding. Who knew Socrates was a Stud Pack fan.
OMG I love that!!!!
If I’ve learned one thing through renovations, it’s that water can show up in places you never though possible. And it stumps you. And makes you nearly cry. Glad you were able to fix it!
Gotta say Stud Pack Gang; not only are you good builders; you're honest too. Some youtube builders would have just fixed it off camera and nevere admitted making a mistake. Home building is ALL about learning, making mistakes and then making it right.
Cudos to the Whole Gang for standing up and helping us make things right. !!!
What I really appreciate is that when you mess up, you take accountability for it, and show how to fix it. Because in real life, people make mistakes all the time, especially on a new project... and the studpack house is work in progress. A work in progress is always going to be a learning experience.
I really appreciate the energy of the dad deferring to his son because it's his son's house. At the same time, the son is being respectful of his dad while still doing the "my roof, my rule" thing.
The mutual two-way respect between parent and child is fantastic. If the youtube personas are sincere reflections of their actual familial dynamics, (I think they are) then that's a model family people can hope for, folks.
Mistakes are part of the learning. If you're not making mistakes, you're not doing anything. And nothing beats experience. Great videos guys.
I think you should leave the sheathing hanging over the slab on the main house because water can’t possibly seap in through an overhanging seam. I know you’re going to liquiflash it but still, who knows what’ll happen to that in 20 years
Enjoyed the episode however really surprised Matt Risinger didn’t pick up on this in the installation video 😮
we did the casements with Matt, and didn't have these big ones on site yet. He definitely would have said something.
😩 that’s sucks guys! I just can’t see how it leaked with how diligent y’all were with sealing. In true studpack fashion tho, y’all give the story how it is, good or bad, and totally humbled. Much appreciated!
It's amazing how you all can stay so positive through all the little mistakes, delays, and do-overs. Despite the setbacks, this garage is looking great!
What a bummer, having to redo those GIANT windows. Props to you gents for taking the time and making the effort to fix! Always disheartening when you find a mistake, but feels great once it's fixed!
Never has someone been so glad to have rain before dry-in
Always bittersweet to do something over. You're not alone. I absolutely hate how all the higher end windows come with the fold out or snap in flanges, whereas the mid grade vinyls come with the massively superior molded flanges all the way around. I can't figure out why they do that other than maybe ease of shipping. I ran into some issues with some very high end Marvins where the top flange didn't even overlap like you show here. You could see daylight in every corner after install. They sent corner flashing pieces but no way I trust them long-term, which is unfortunate because my name is on the install. Knowing they weren't going to make any shifts in production solely on my account, I still had the rep come out and look so I could express my concerns. We had a minor pinhole leak in one window during gailforce winds and terrential downpours, but I could only add Lexel and trim and hope for the best, which I absolutely hate doing. Couple of notes- an old timer I worked with always set his window ROs slightly taller and put a piece of cedar clapboard on every sill before flashing tape and window install so that any water would automatically drain out. -Something I do with all my 1st rows of sheathing is wrap the bottom with a run of zip tape to completely eliminate wicking. For the future, you should really run your sheathing ~6" beyond your sill plate down past the foundation. -Lastly, you want to do the same with your bottom flange as you did with the top by having your bottom flange run long and behind your side flanges. Awesome video as always guys and I really appreciate and admire the transparency. Customers are surprised when I'm actually honest about issues when they ask how everything is going. I explain both the problem and solution and they always have a look of concern on their face right up until I tell them it won't cost them anymore lol. Then it's just a sigh of relief and appreciation.
I think having the zip slightly proud of the foundation is good for water run off.
one detail to consider on the main house is to zip tape the bottom of the zip sheets where they contact the slab, that way you have multiple layers of sealing protecting your siding. the zip tape handles protecting the sheathing, and the liquid flash protects the concrete to zip joint.
I have installed many many windows of many manufacturers and also worked exclusively installing for Pella for years. It is not uncommon to install windows without a nail fin ... like in an opening of a house covered in brick. They have a brick mold that snaps in to fill some of the gap but you still need to caulk of course. It still always made me nervous that they might leak over time. But in sunny California they seem to be fine. Always always put a nail fin on if you can. Pella also has adhesive flashing tape that is made for the left and right corner joints of the fin. . And yes ... always leave the bottom fin not sealed with caulk. Let that water get out if it does get in. And water test for at least 10-15 minutes. Sometimes it takes awhile before a leak starts to appear. When stucco or siding is on ... water test for 30 min.
Man wish these episodes where 2 times longer. - It looks like tinted windows from the streetview. Amazing job. And rain here even goes upwards and in circles.
I appreciate the Integrity. Keep it that way Gentz! I never comment on anything but, dealing with Contractors, etc... it's nice to see a builder that owns up to it. It helps us little guys too. Cheers.
Always show your mistakes, that's what makes your channel unique. There are hundreds of DIY carpentry channels out there where everything just magically fits together and always works perfectly. Those channels are heavily edited and don't reflect what really happens on the job site.
So glad the window is proud of the Zip.
To be honest I think the salesman did you a favor, given the fact the window’s size and weight. Meaning you could install them from the inside with less “pucker” factor. Not sure why he didn’t include the flanges.
Finally, I like that you’re building a house, with a Remodlers eye. A lot of builders don’t think five steps ahead when building.
The house will be very tight. Make sure you are getting the hrv/erv right. In the garage, make sure you have a way to move the air. If you start the car, fumes will linger around. Since your house is very tight, you might consider going rockwool rather than using spray foam which can be a headache. R value on the roof though might be an issue.
I noticed on the first window video that they were sitting in pretty far, and I thought maybe it was going to be brick. Your going to be thankful it leaked so now they are sticking out correctly for siding
love how you own up to your mistakes and correct them. Makes me wonder how much Bob Vila left on the cutting room floor so it looks like he did it right the first time.
Norm did it right...
For future planning: Before you start planting, rototill all of the beaten areas first as deep as you can. Also add compost or something else.
Too many folks spend a butt load of money over many years after they plant grass trying to fix the problem of compressed soil.
Or better yet just do edible trees and perennial plants front and back. Duplicate the multiple canopies that originally grew in Texas. Look up permaculture.
What, wrong video dude?!
The windows might not have been watertight but one thing that always is, is you guys! ❤
Ready and willing to admit when mistakes/accidents are made, and even better: more than willing to show how to fix it when something happens
In life, I have learned to ALWAYS do it right! Integrity and pride in whatever you do and put your name on! Great job guys! Good to see these occasional flubs that educate and prove your not perfect advanced aliens!!
Thank you for sharing your challenges as well as your celebrations! It's so nice to actually see someone not only sharing perfection online. Keep doing you!
It the consistent showing and fixing your mistakes that make this channel so valuable! Like in so many things it's the details that get you intro trouble. Great work, I hope one day I'll be able to put it to use building my own custom home in the future!
Maybe it’s been said…, but it’s only a mistake if you don’t fix it. Your keen eye for detail and ability to explain these processes is phenomenal. Most of us are good at one trade and you guys are crushing all of them. See you on the next one.
I can already tell this is going to be another fantastic video and a great learning experience keep up the great videos love the content
I really appreciate how you are willing to share your mistakes. Not many channels would do that.
I love how you guys show us your mistakes and how you fix them because those are probably some of the exact mistakes a “DIYer” would do. Excellent job on the garage and video fellas. Can’t wait for the next one.
Thank you for being transparent. As a viewer, it means a lot that you admit when things don't go perfectly and share the lessons you've learned.
I love seeing the mistakes as well as the successes! As a homeowner who will be remodeling, it is good to see where problems might happen so I can avoid the same issues you mentioned!
Keep up the good work I love how you post your mistakes and show us how to fix them
Another awesome episode. Learn a lot and your father son relationship is awesome.
Love the videos guys keeps me glued to the screen
The details about how some windows come with it without nail fins were totally new to me. Glad you caught it! It's looking good!
Outstanding video, thank you for the update
The most valuable lesson learned are the mistakes you made along the way taking accountability and fixing them is how you grow glad to see you guys doing that
I’m beyond impressed with you guys and the way you always make things right.
How frustrating for you guys 😢 I do like how you keep it real showing all the bad with the good. It is hard enough building from the ground up but then you add filming it all for us. Thank You for bringing us along!
Great job guys!! I always look forward to seeing the new content and updates on your project. Keep up the great work! Looking forward to seeing the next video! 👍
Kudos to you guys for tackling this head on. There is no project where everything goes as planned, and recovering from mistakes is great learning.
Really appreciate the fault finding and diagnosis, this is the hardest part of fixing something where the answer is difficult to come by.
love your honesty. it's what makes your show so amazing!
So glad you show problems and solutions! Good job!!!
There are many reason why I love watching the Stud Pack crew! One of the biggest reasons is your honesty and willingness to show us your mistakes. I’ve learned so much from watching you guys! Keep the great content coming!!!
Love watching you guys!! You build the right way!!
Thank you for sharing your situation and solution. And I respect your courage to share this.🔨
Great video! Love the way you guys aren't afraid to show mistakes.
I love that this video documents and repairs an installation snafu. That's good transparency, and it's also good education, because we always make mistakes in life. Thanks for that!
WOW that looks great ... I could really feel your 'pane' with the windows LOL. Another great video by the Stud Pack Crew! Can't wait to see what's up next! Cheers Paul, Jordan and Rad :)
I love that you didn’t fake it with the window installation. Man it could have been easy to just move on and not even mention it! But you didn’t! THATS INTEGRITY! You’re true to yourself and others about mistakes. We all make em and then go to TH-cam to learn how to fix them. This is a perfect example of that! That’s what makes me love this channel about! Seriously, I tell everyone about this channel! KEEP UP THE AWESOME WORK!
Live and learn! 👊 You guys are stronger for it 💪 Good job 👍 Thanks for showing us the repair.
It’s better to do it now and not when the house is complete. Thank you for eating some humble pie and posting your unfortunate dilemma. You guys rock.
Thank you for sharing this. It really helps me.
This is what learning is all about. Thank you.
You guys are doing a GREAT JOB, we all learn something new everyday on our projects. Thank you for sharing your journey with us.
although, if you flush the zip with the slab, you won't be able to completely seal that downward face of the OSB... i think sealing that up so it can't wick up moisture is a really good thing. So consider that if you move the framing back. Great job guys!
I just love what you guys are doing. love watching the videos, I look forward to them.
I just found your channel guys and rely amazing videos, no many contractors showing their own mistakes and in fact they hide them. Subscribed
Great video nice re-do on the windows. Sure want to fix that now and not later when you have the siding on and everything done. Just shows what great craftsman the whole Studpack team is. Great job.
Thank you, I'm learning more from you guys than any Web site or any technical Bulletin that available. Thanks for a great factual channel.
I recommend just using Siga Fentrim tape over liquid flashing the sill on the main house. As you experienced, the liquid flash goes fast and it gets everywhere.
Another great show. Nice detective work, tracing back to the install error. When I replace my windows I’m counting on the lessons you guys learned, so I don’t make the same mistakes.
Its good to see you show some mistakes we all make them so many home improvement shows only the finished product like they did it perfect. Great job guys..
Paul, you are a classic!! Your knowledge, humor, and especially your work ethic makes me 'susceptible' to watching your channel. Keep on truckin', you're doing a fabulous job of building and instructing.
I love that you guys make good on your mistakes even if you don't REALLY need to. Your are perfectionists to the enth degree and I love it. I intend to follow this build to the very end and love every episode.
Thanks for sharing. We have an order of Pell as on the way and it was helpful.
Love you guys, you are the best and so transparent, thank you for such great content.
I just love these videos. The relationship between father and son is gold.
Guys - I enjoy your video. Glad to see you added the liquid flashing. One additional thing I would recommend on the ZIP sheathing is folding tape around the bottom edge and avoiding direct contact with the slab. It’s a lesson I learnt as it was a detail i missed and the ZIP rotted out in less than 3 years in Houston. The moisture wicks into that exposed edge if it’s touching the slab or rain is bouncing off the slab onto the edge. I can email you pictures of what happened if moisture is left to soak into the ZIP via the exposed edge then left to basically steam behind the siding in hot texas weather. All the best Iain.
i did something similar on a garage a few years back i had access to again (swapping a light fixture out). i wrapped the bottom edge of the sheathing in zip (in my case plywood). and that was sealed (similar to lexel but i forget which product TBH) to the sill plate and footer. in my case my dimpled housewrap is also taped to the bottom of the sheathing. but this means no extra step sealing below the installed sheathing with liquid flash or whatever. F that noise. Portland, OR, rainy AF, sheathing right above a concrete patio. no rot. bugs and mice inside because of the garage door. so good luck sealing that thing. ;-)
When sealing in conjunction with zip tape, always wipe zip tape backing with alcohol to remove release agent, it gives a better adhesion between the two.
Simply put!! My favorite TH-cam channel!! You guys are classy, honest, and total professionals - through and through!
It's so nice when people put their mistakes out there. I know it's not fun, but I learned something here. I knew it was weird that there was no nail flanges when you put the windows in, but I haven't put in a lot of windows. It's nice to have this info since I am starting framing on my first house in the spring. Now I know. Good job guys!
Your videos are so entertaining and educational. Love it!!!!😊
Thats what i love about this channel. Mistakes are bound to happen!! Own it, fix it, and overcome!!
Absolutely awesome video!!! I love the fact that you owned-up to a mistake and in doing so you inadvertently created an opportunity to show everyone what happened and what you did about it. RESPECT!!! Keep up the great work.
absolutely incredible how fast you guys blasted into the universe ... It's been a huge delight and super educational being subbed all these years. well done gentleman!!!! Super happy for your success. I used to click LIKE on every comment on the vids ... now it takes days to do what took me 10 minutes. Cheeers guys
I learn just as much or more from your recovery from mistakes or oversights. Mistakes are a pain and I just as soon learn from your mistakes rather thane mine
I love the fact that when you make a mistake or something goes wrong you show us. That shows us that you will gladly admit when you make mistakes AND it teaches us so we don't make the same ones. LOVE IT. Can't wait for the next video.
This is so fun! I'm super excited for you guys
This is why I love this channel. This channel is so informative, honest, and humble about how it does things.
Go watch Matt Risinger “five better ways to framing “he give us a good tip on how to finish the bottom of the house with that zip R bored. He shows putting a piece of treated lumber at the bottom of the zip board along the foundation, and then ceiling. You’ll have to check it out.
Owning your mistakes than explaining the error in your ways and how you remedied it is one of the best things about these video's !
Great Video! Its great to go back and correct errors on tape. It helps ups DYI'ers build confidence on getting it right!
Good that you liquid flashed the bottom of the zip sheeting and the nail holes at the bottom row, though you are not required to do so it's good to liquid flash all the nailholes, if any nails have gone bellow the green layer they shoudl definatley be liquid flashed. The roof is also good to cover the nail holes though it depends on how your climate.