How to open servo motor & Encoder. How to change Servo motor bearing. Servo Motor Repairing Details.
ฝัง
- เผยแพร่เมื่อ 22 พ.ค. 2023
- How to open servo motor encoder. how to open servo motor bearing. how to open servo motor & details. how to setting encoder. What is an encoder. Encoder setting in servomotor.
Servo motor repairing details information.
Very Very Informative
Rewind and conection
Waiting for similar another vedio
best
Can you do this sick encoder programming?
❤❤
Rewind
Can u supply spares for this motor encoder and power connector
Types of encoder... Encoder information required & connector port or pin number or picture required for better understanding. And where are you from?
So a question regarding the encoder, you said it needs to be put back in the same place - but what happens if you have a brand new stepper/servo motor?
Would you need to open it up, or do you just put the value to "0" before starting it up?
I would also recommend building a "stand" for doing maintenance/service on the stepper/servo motor, could help better.
Thanks for Your Question..... 1st if you need to open this encoder for repairing purposes you must need proper tracking or marking back cover side encoder Stand which place encoder is Fixed. If a little bit displaced from the original setting it will not be working. So be careful and need to mark properly when you Open.
Hi friend. Can you tell me that how can i align a quadrature encoder index to a custom bldc motor which hasn't got factory out encoder on itself ?
Is your system monitoring from HMI, you can easily see the before opening encoder value from HMI.... What are the actual settings... Then you open and do maintenance or replace.... Then again you need to fix the servo motor and give the connection of the encoder also and then you compare with the previous Value.
Thanks it is not actually replacement , it is mounting. I mean mounting a encoder to the bldc motor like drone motors which hasn't got an encoder by factory default.
For alignment of the encoder index and the stator flux of the motor properly
Why there is humming noise coming
Sorry for the interruption.. Next time I will solve this. Thanks
Need encoder
Send your detailed information about Encoder
@@10minutesengineeringsolution😂😂😂😂 mostly it not works
2 encoders replacing done... Successfully completed.
Ganti bearing apa harus ganti endkoder bro
Not understanding your question....
I am from indonesia. You speaking indonesia
@@mohefendy4148 Sorry i am from Bangladesh.... No Don't speak Indonesia.....
Need to align the encoder and roter by measuring motor pulse with the help of oscilloscope meter and dc power supply, otherwise, like this as shown in the video this motor will not work ! Please take caution before disassemble the servo motor!
Absolutely right