How to Replace Front Right CV Axle Assembly 2007-2011 Toyota Camry

Buy Now!
New CV Axle Assembly from 1AAuto.com 1aau.to/ib/1AAC...
This video shows you how to install a new front right CV axle assembly in your 2007-2011 Toyota Camry. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.
This process should be similar on the following vehicles:
2007 Toyota Camry
2008 Toyota Camry
2009 Toyota Camry
2010 Toyota Camry
2011 Toyota Camry
Tools you will need:
• Pry Bar 1aau.to/o3a/1AX...
• 22mm Wrench
• 10mm Socket 1aau.to/obsy/1A...
• 12mm Socket 1aau.to/obN6/1A...
• 14mm Socket 1aau.to/obN6/1A...
• 21mm Socket 1aau.to/oauj/1A...
• 22mm Socket 1aau.to/oqI/1AX...
• 30mm Socket
• Brake Caliper Hanger 1aau.to/okK/1AX...
• Hose Clamp Pliers 1aau.to/ogy/1AX...
• Pliers
• 1/2 Inch Ratchet 1aau.to/oauj/1A...
• 1/4 Inch Ratchet 1aau.to/obsy/1A...
• 3/8 Inch Drive Ratchet 1aau.to/obN6/1A...
• Torque Wrench 1aau.to/oaV3/1A...
• Gloves 1aau.to/oaCJ/1A...
• Safety Glasses
• Drain Pan
• Floor Jack 1aau.to/oakg/1A...
• Hammer
• Jack Stands 1aau.to/o8n/1AX...
• Punch
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@anthonybeaton255]

Where to refill the fluid lost and what fluid to use?

[@Crysto]

This tutorial does not work for the 6 Cylinder 3.5 model the brackets are crammed in with too much other stuff to be able to get it off you have to take it to a shop which I only realized after taking everything apart. This video would work fine if I had a 4cyl

[@justincoats7236]

We were stuck getting the passenger transaxle out. Those 3 bolts were tough to get out but it's the only way. Thanks, we got it done.

[@DjCBlaq]

Im glad they showed one grtting stuck. Often they never come out. Which means you need to order that bracket as well to have in hand.

[@terrywynn6113]

So the oil that came out, i don't need to replace it ❓🤔

[@terrywynn6113]

Incomplete video, you leave everyone concerned about the oil lost and replacement 🤔🤔❓❓

[@mailnrajesh]

how much it would cost to replace axle at garage shop? 2012 Camry

[@chistianlebroc3970]

Question... the spline with a round shield cap at the end that connects to the transmission (transaxle), does the cap seeded flush to transmission or is there a small gap? Do you remember if you had to hammer it in? I just replaced my 2011 and it has small gap, no transmission fluid leak from it but my traction control light came on, picture of car with squiggly lines behind it.

[@CameronFeltz]

Refill fluid???

[@FatHead007]

What tool are you using at 8:46 ?

[@Elpipiton]

He forgot to mention. IMPORTANT! THERE IS AN INDENT ON THE AXLE NUT, YOU MUST DENT IT OUt. Unless of course youre at a shop with air powdered high torque tools. The rest of the video is useless if you cant even do step 1.

[@black6800]

استمر متابعك من السعوديه👍🏻

[@jazamaraz8029]

Awesome video.