2009 Chevy Cobalt gas line replacement

แชร์
ฝัง
  • เผยแพร่เมื่อ 5 ต.ค. 2024
  • Video shows how I replaced the gas lines on a 2009 Chevy Cobalt (with fuel filter option). The line had rusted through by the driver's side rear tire. Replacement lines were purchased from www.linestogo.com

ความคิดเห็น • 73

  • @megabaneen8057
    @megabaneen8057 5 หลายเดือนก่อน

    Excellent camera work. Thanks for this video blessings to you

  • @1pcmedic
    @1pcmedic 5 ปีที่แล้ว +8

    Excellent Video!!!!!!!!!!!! Just a tip, never do any gas line repairs in the garage or near the house.......you cannot get the car to the curb fast enough if the SHTF...........It should be a LAW that all brake, fuel and transmission lines are stainless steel right from the factory. Charge us the extra 100.00 up front and save us from these headaches that were the first thing to come down the assembly line and the car was built around! Brining and over salting the roads is killing the underside of all of our vehicles. Years ago nobody ever had to replace any of these lines.

    • @diywithdave3186
      @diywithdave3186  5 ปีที่แล้ว

      Thanks for the feedback.

    • @damkayaker
      @damkayaker 4 ปีที่แล้ว +1

      Ethanol in the gas helps corrode the lines too.

  • @terryrideout7457
    @terryrideout7457 2 ปีที่แล้ว

    God RICHLY Bless u.Thank u for this awesome video.My SON JUST BOUGHT HIS FIRST CAR 09 COBALT. SO GREAT 2C AND HEAR PEOPLE WHO PUT GOD FIRST IN THEIR LIVES.I WILL CERTAINLY LOOK FOR MORE VIDEOS FROM U AND TELL MY FELLOW CHRISTIANS.HAPPY NEW YEAR TO U AND YOUR FAMILY.GREAT GREAT VIDEO KEEP MAKING THEM.MORE ON THE COBALT TO PLEASE AND THANK YOU.

    • @diywithdave3186
      @diywithdave3186  2 ปีที่แล้ว

      Thanks for your comment and the publicity. May God bless you and yours in 2022.

  • @lorettasuedouglas
    @lorettasuedouglas ปีที่แล้ว

    New gas line cheevey coult 2006

  • @DugEphresh
    @DugEphresh ปีที่แล้ว

    Amen🙏

  • @karenvivier4858
    @karenvivier4858 3 ปีที่แล้ว

    great video, i dont think i heard you swear once and you didnt even have a greenhorn lightholder lol 10/10

    • @diywithdave3186
      @diywithdave3186  3 ปีที่แล้ว +1

      Thanks for the feedback. As Psalm 34:13 says, "Keep your tongue from evil and your lips from speaking deceit."

  • @StanMilewski
    @StanMilewski ปีที่แล้ว

    Thanks for posting, great video. Do you recall what part number you used from linestogo? They do not show an option for a 2009 with an external fuel filter. Did you use a set listed as 2008? It looks like its the same as the 2009, but not sure. Thanks

  • @MrCliffda3rd
    @MrCliffda3rd 4 ปีที่แล้ว +1

    There's now a recall 2008-10 cobalt and hhrs on the fuel lines. It was on the news yesterday.

    • @diywithdave3186
      @diywithdave3186  4 ปีที่แล้ว

      Thanks for the info, I had not seen that yet.

    • @MrCliffda3rd
      @MrCliffda3rd 4 ปีที่แล้ว

      @@diywithdave3186 it's not really official for now GM is working with the Highway traffic association on the issue. I'm sure the recall will happen. I have 2010 coupe and so far no smell and leaks.

    • @diywithdave3186
      @diywithdave3186  4 ปีที่แล้ว

      @@MrCliffda3rd that's good to know also.

  • @jeffskingley6042
    @jeffskingley6042 5 ปีที่แล้ว +2

    Thanks for this video. Very helpful but why did you replace all the lines? Was it just for demonstration purposes?

    • @diywithdave3186
      @diywithdave3186  5 ปีที่แล้ว

      The lines that I used came as a kit. Individual sections were not available. I didn't want to mess with trying to custom bend an individual section and hoping that I could get it not to leak.

    • @1349xvx
      @1349xvx 4 ปีที่แล้ว

      He did it for the Bible. He is high on Meth

  • @legendboy9575
    @legendboy9575 3 ปีที่แล้ว

    Very helpful thanks for the video god bless

    • @diywithdave3186
      @diywithdave3186  3 ปีที่แล้ว +1

      You're welcome, thanks for the comment. God bless you too!

  • @DIYVariety
    @DIYVariety 3 ปีที่แล้ว

    Thank you for yhe help, God bless

  • @donaldbedore3026
    @donaldbedore3026 2 ปีที่แล้ว

    Very detailed thanks

  • @mikejohns777
    @mikejohns777 5 ปีที่แล้ว +2

    This is a common problem in this POS car along with its Pontiac G5 counterpart. I'm on the fence in junking my pile o' crap and paying for this stupid repair. I do not want to do this crap myself.

    • @diywithdave3186
      @diywithdave3186  5 ปีที่แล้ว

      I agree, I am not impressed with the car.

    • @mikejohns777
      @mikejohns777 5 ปีที่แล้ว

      @@diywithdave3186 I sold a geo metro and junked a minivan to get one of the XFE models. I miss my geo metro. That's pathetic. That car was fun (except driving to speed and to pass on the highway).

  • @jeffskingley6042
    @jeffskingley6042 5 ปีที่แล้ว +1

    Makes sense

  • @1349xvx
    @1349xvx 4 ปีที่แล้ว

    To hell with your mind tricks

    • @diywithdave3186
      @diywithdave3186  4 ปีที่แล้ว

      Thanks for you comment. I'm not really sure what you mean by mind tricks. I am glad you believe in hell. I pray that we can avoid it. Peace be with you.

  • @funkervogt47
    @funkervogt47 4 ปีที่แล้ว

    My Cobalt's fuel line is leaking, and the local garage wants $1,250 to replace it, including labor.

    • @diywithdave3186
      @diywithdave3186  4 ปีที่แล้ว

      It was not an easy job, but definitely less expensive to DIY.

    • @funkervogt47
      @funkervogt47 4 ปีที่แล้ว

      BTW, I found a different garage that did it for $600, including labor. They said it only took two hours' labor. Not sure if one or two guys worked on it.

    • @diywithdave3186
      @diywithdave3186  4 ปีที่แล้ว

      @@funkervogt47 I wonder if they were going to do the same thing, patching the old one vs. replacing the leaking line or both lines?

    • @diywithdave3186
      @diywithdave3186  4 ปีที่แล้ว

      @Tin Tizzy personally I would have some reservations about doing that. Depending where the leak is something might get caught on the hose and pull it off or cut it. Then there would be the potential of spraying gas all over the bottom of the car, in combination with sparks, that would not be good.

    • @funkervogt47
      @funkervogt47 4 ปีที่แล้ว

      They fully replaced my old fuel lines. I saw it.

  • @SportsRaschman
    @SportsRaschman 5 ปีที่แล้ว

    On a scale of 1 to 10, how difficult of a job is this? I know my way around a car and I'm sure I can do this, but I'm concerned about how long it'll take my inexperienced self to do it as well as the various tricks in dealing with fuel lines...any additional info would be helpful. This is my son's car - a 2008 Cobalt. Thanks.

    • @diywithdave3186
      @diywithdave3186  5 ปีที่แล้ว

      The most difficult part was figuring out how to get it apart, and dealing with the broken volt for the fuel filter. It took about a week or so of working on it after work and whatever time I could spare on the weekend. Part of the difficulty I had should be reduced with the tips that I shared on the video. If you have the replacement parts on hand and the required tools you could probably get it done in 16-24 hours, assuming that you don't do this kind of stuff for a living.

    • @SportsRaschman
      @SportsRaschman 5 ปีที่แล้ว

      @@diywithdave3186 After watching your vid I decided "no way!" Especially with my son living two hours away at college. I knew there was no way I could do it in one day. He's found a garage that will do it for ~$550. That is def worth it!!

    • @diywithdave3186
      @diywithdave3186  5 ปีที่แล้ว +1

      @@SportsRaschman given that scenario, sounds like a good choice.

  • @flynnndawg
    @flynnndawg 4 ปีที่แล้ว

    I cut my lines to repair this on my 08 g5, but I didn't think to mark which line is the fuel feed, can anyone tell me if it is the line nearest the left side of the car or the inner line, I know 1 is fuel , 1 is vapor... I can send pix if you need to see...

    • @diywithdave3186
      @diywithdave3186  4 ปีที่แล้ว

      The fuel line will have the filter (25:16) on it by the gas tank, the other will originate at the vapor canister (black plastic box). At the engine, the liquid line will go to the fuel rail (10:50) on the engine and the vapor line turns into plastic at the engine and it connects as shown at 11:20 in the video. As long as you get the ends of the same hose in the right place you should be good. If you cut the line and don't know which is which on the bottom of the car, you could blow air through the line and see which one it comes out on the bottom of the car.

    • @flynnndawg
      @flynnndawg 4 ปีที่แล้ว

      @@diywithdave3186 im splicing them with 6-an, I didn't pull the whole lines out... I just wasn't sure which line fed fuel and which 1 was vapor, I figured it out.... I traced them from the engine to underneath the car... the inner most line is fuel... I didn't think to mark them before cutting them... thank you for the response... :)

    • @diywithdave3186
      @diywithdave3186  4 ปีที่แล้ว

      @@flynnndawg you're welcome, glad you figured it out.

  • @BenJehovah6969
    @BenJehovah6969 3 ปีที่แล้ว

    I fixed my car without Jacob or any lord helping mount shit on the Cobalt i drive

    • @diywithdave3186
      @diywithdave3186  3 ปีที่แล้ว

      Thanks for your comment. May the Lord bless you.

  • @BenJehovah6969
    @BenJehovah6969 3 ปีที่แล้ว

    oh isreal, oh christianity, why do you war with my spirit that cannot be defeated?

  • @1349xvx
    @1349xvx 4 ปีที่แล้ว

    I care less about your propaganda. This is a car repair video...

    • @diywithdave3186
      @diywithdave3186  4 ปีที่แล้ว +1

      Thanks for your comment. I care a lot about the Scripture, that is why I share it. I am glad if my video's help viewers to fix things, but that has no eternal significance. Helping someone to believe is quite a different story.

    • @maimon1
      @maimon1 4 ปีที่แล้ว +1

      @@diywithdave3186 Thank you so much for the video and the scripture in it. You are not only trying to help me saving my perishable car, but also saving my eternal self. Thank you again.

    • @diywithdave3186
      @diywithdave3186  4 ปีที่แล้ว

      @@maimon1 You're welcome. Thanks for your comment.

  • @quinnsack
    @quinnsack 4 ปีที่แล้ว

    jesus christ im looking for a mechanic not a preacher...

    • @diywithdave3186
      @diywithdave3186  4 ปีที่แล้ว

      Thanks for the comment. You won't find either one here. Just sharing a few things I have learned.

    • @quinnsack
      @quinnsack 4 ปีที่แล้ว

      @@diywithdave3186 like the bible verse you started the video with?? im definitely not looking for that in my diy car fix videos

    • @diywithdave3186
      @diywithdave3186  4 ปีที่แล้ว

      @@quinnsack is there a Bible verse that you would be looking for in a diy car fix video? With this job there was definitely a need for renewed strength at times.

    • @quinnsack
      @quinnsack 4 ปีที่แล้ว

      @@diywithdave3186 lol there is definitely not a "renewed strength" needed from a make believe beareded man that may or may not have hallucinated from an acatia tree lolol

    • @diywithdave3186
      @diywithdave3186  4 ปีที่แล้ว

      @@quinnsack did you know that there is many times more historical evidence that the Bible is accurate than any other ancient document that exists? We have roughly 5000 ancient Biblical manuscripts and the next closest is Homer's Iliad/Odyssey at around 800. Also the most plausible explanation for Jesus reported resurrection from the dead is that he actually did rise from the dead. You are free not to believe it but the evidence is against you. If someone is hallucinating you generally don't believe what they say let alone risk your life telling people about what they say.

  • @MoGumboFukUTubeForChngngMyName
    @MoGumboFukUTubeForChngngMyName 10 หลายเดือนก่อน

    Dude… even praying and regurgitating scripture will not help you make a Cobalt drivable.