PVC Window repair - Use This Technique
ฝัง
- เผยแพร่เมื่อ 30 ต.ค. 2021
- The plastic fabricators technique was used to repair this old upvc window frame, the gap is cleaned, filled and scraped back to leave a completely smooth and invisible finish. #tutorial #plastic #repair
- แนวปฏิบัติและการใช้ชีวิต
![[Live สด] การออกรางวัลสลากกินแบ่งรัฐบาล งวดวันที่ 1 มิถุนายน 2567](http://i.ytimg.com/vi/3canzHC_d0k/mqdefault.jpg)
Where can i get the white plastic from?thanks
this is inspiring! one question though (at the risk of asking your to ruin your newly repaired frame - Have you done a joint and cut it on the bias to show the thickness of the filler and the integrity of the weld? Regardless, this is a really nice job... especially the use of a solvent wipe to 'unify' the repair. Thanks again!
Brilliant job by the way
This is brilliant, trying to figure out how to repair a cil with a chunk taken out and not much to support fillers
Hi, hope the video has helped, thanks for comment 👍
where can i get that filler please
Superb 👏🏻👏🏻👏🏻
Is the pvc in the video "upvc" like the plastic moulding you find in home depot, or like an azek or versatex pvc trim ? Thanks
Hi, yes the material is upvc but not that low grade light weight stuff from DIY stores, not sure that stuff can be welded, hope that helps
I have a plastic door and a frame. When I played with the dog I fell backwards and the door lock latch took a piece of plastic frame out. So now door can be just pushed open, would be nice to know how to fix that
Interesting. I'm a window and door fitter, could the torch weld dpm? Many of the flush threshold patio doors I fit require a purpose made damp tray up the back on the inside and overlapped in the corners as the doors breach damp course.
If it was possible to weld the dpm sheets in the corners that would be belt and braces.. thanks
Hi biggest dickus, I've never tried welding dpm, it's a bit thin and the heat would probably burn through it pretty quickly, you could try turning the heat down low maybe that would work
Hi would this work on small screw holes on outside of upvc french doors. And where can you buy the torch and the plastic used to fill holes. My neighbour came round to help me as I’m disabled and use a wheelchair to fit the door hooks to keep them open but his eyesight was 4” out now have one high and one low clip my wife wasn’t impressed. not sure if you could help with advice I’m down south if that helps cheers steve
Hi, yes it should definitely work, the heat gun is a "leister ST triac" if you have a look about you should be able to purchase one from ebay, think they're around £300 brand new, il find a link for the weld rod and send it over 👍
A tenant has burnt my window sill with an iron - how can this be repaired as only on top and sill not broken please?
Hi Sir... I dont have welding torch. can i use heat gun? Thank you
Hi, a heat gun might work if you can get a high enough temperature from it, you will need to get an attachment nozzle for the end as well, hope that helps
Hi fab job,What make welder is it and where do you get the plastic to weld with?
Hi, the welding gun is a Leister Triac ST, the filler rod you can get online, a good quality brand is Simona. thanks for watching & thanks for the comment 👍
@@allkraftdesign6120
Hi thanks for for such a quick reply, can you tell me the ideal temperature for welding pvc as I understand that to high just burns the plastic? As you can see I'm 1st time thinking of repairing! 👍
Hi, no probs! It's around 280°C, you can test your temperature on the end of a stick of filler rod, if the rod burns rapid turn the temperature down a bit, you should be able to hold the heat gun on the rod for a couple of seconds before it starts to go brown, hope that's helpful!
@@allkraftdesign6120 many thanks your a star. I'm now a subscriber! Cheers and look forward to future videos. 😉👍
@joeparamed90 thank you and happy welding! 👍
I have a crack in my upvc door caused when moving in..its a funny one tho will this still work can send pic for an answer thank you
Hi Ryan, yes no problem send some pics
@@allkraftdesign6120 thank you were shall I send them to you to view
Can you patch a hole from hail using this technique?
Hi Andrew, you can repair most plastic issues using this technique 👍
where do i get these tools?
Yes, a useless video!
Will this work on North American pvc windows. The video shows a upvc profile?
Hi👋 Yes will definitely work, if the windows are PVC material they will be weldable, the U stands for un-plasticized, meaning the PVC is solid and not flexible. Hope that's helpful! Message if you need anymore info. Thanks
Do you know if the weld sticks are available in custom colors. Would they blend to match a manufacturers specific white?
@dgrouche1676 hi, yes there is various colours of welding rod's, I'm not sure about specific shades of a colour. The welding rod from the video wasn't a perfect match but after wiping over with the PVC Solvent it seemed to blend in quite well, if it was possible to get some scrap window frame you can cut a small strip off and weld it in the same way.
where can we get this please
Hi, what do you want to get ?
@@allkraftdesign6120 that stuff for filling in the hole thanks
What is the plastic stick you are using ?
Its PVC welding rod
Hello and do you please have a link where I can purchase these pvc welding rods ,TIA
Hi, how much welding rod are you looking for? Is it just for practicing purposes?
@@allkraftdesign6120 thanks for the reply and yes it's just for practicing cheers
Hi, I can send you some if you like, was it PVC you were looking for?
Hiya, can you tell me the name of the scraping tool you used? Tried various searches couldn't find anything similar...
Thanks!
Hi Steve, we usually make the scraping tool on a grinding stone from an erwin high speed steel blade, hope that helps.
Oh so it's custom made and can't be purchased?
Where in UK are you based?
Yes it's custom made, it takes maybe around 10 minutes or so to make on a stone grinder. I'm based in Birmingham.
Would you sell any?
Hi Steve, yes I can make some scrapers for you, that's no problem,
what was the filler material?
Hi, the filler rod is a white PVC, it can be purchased from any plastic sheet stockist or amazon but the quality won't be as good.
@@allkraftdesign6120 thank you
Thank you for watching!
At £300 for the "plastic welder" alone it's clearly more cost effective to get someone in to fix it
Fuckin hilarious. your lucky you didnt warp the frame with heat. frames dont get broken that way. lets see you fix one that got hit with a hammer during installation
Hi cintorr, thanks for the message, if you go to my channel and watch the beyond Repair video you see that fixing PVC thats been smashed with a hammer is really easy too.. Nice to meet you.. loving the language
@@allkraftdesign6120 im still lmao. you have no clue what your doing.
Thanks for the views 👍