Wow 😳 for a 6s you are zipping by! LOL, even with the motorcycles 🏍. I've just recently built my first board which is a 10s 5000 mah. I hope you'd come visit to see my diy tutorial. Goooo diy esk8!! - Neil
Hello, I made an electrick longboard. But I have a problem with the drive belt, the tooths on it wears out. My motor is 400 kv and I have a 2, 3s batterys in series(22.2 v). And my esc is 70 amps, but is there anything I can change in the esc software that makes the acceleration longer? Nice video !
The esc are configurable in acceleration to reduce torque at the start so as not to damage the transmission. Mine is programmable with a USB card. The belts are fragile and limited in strength. The chains are more efficient but noisy. My acceleration is brutal, but I manage the acceleration with the trigger.
But I bought an esc programming card, but it is not changing with ¨very soft¨. shoud I buy an esc to usb adapter and try to program it with my computer?
bonjour et merci, ce projet m'as couté 350€ au total, j'en ai fabriqué deux quasiment identiques mais le premier m'avait couté plus cher car j'avais pris du matériel de mauvaise qualité, l'esc avait grillé et m'avait aussi fait griller le moteur .
now i understand, that we dont need to much torgue, 500kv is enough, more efective and more speed. I use same specification but 270kv motor, its to much torgue but to slow, just 25-30 km/h
Hilly Craft a friend who weight 90kg go at 53 kph whithout problem. 500kv have good torque and good speed. if you want more torque, use a lower kv but it reduce the top speed
It's indeed hard to believe on 6S and with such a small single motor...except if you weigh 45kg or less...Furthermore with only one small motor and only 6S...What gearing and wheel size do you use? It would be nice if you could use a speedometer to measure the speed. I have a dual 270KV 5065 10S5P --> 50kmh with 97mm wheels and a dual All terrain board with 7 inch tyres and 6355 motors and 190KV : 44kmh.Both have 10S5P batteries 10000mah and the max range i can get is 25km with the smaller wheels.Riding an eboard seems fast but that doesn't mean you are really doing 50kmh.That's just not possible with such a high KV and such a low voltage+ i suppose you used 10000mah multistar high capacity lipo's who have a rather low discharge rate...MAke us a pleasure and use a speedometer in your next video's ;-) Grtz man
AWESOME BOARD BRO
15km/h
Thats no way 50kmh
I did not make this video to show its max speed
well then this video is shit. this shit does not go 50km per hour. its just a fucking clickbait
You need an 190kv or more Motor to get that speed
that depends on the rear drive ratio also , so not true
поддерживаю
Vraiment beau boulot ! Cà doit être super fun de rouler avec. Bel avenir pour toi
nice! motor - Turnigy Aerodrive SK3 - 6354-260kv ?
no is a Turnigy Aerodrive SK3 - 5045-500kv Brushless Outrunner Motor
for more speed
SK3 - 6354 has 2630W it s obviusly too speed no? for what?
fvt esc 120a recomended or not?
Quel kit engrenage ?
Et sur quel site ta acheter ton matos
Super sinn 👌🏽😍
Is that direct drive? no belt or chain?
nice board. what is your battery setup ?
thanks ;)
battery lithium 6s 22.2v 10000 mah, Turnigy
Great board
Your videos are amazing.
I want to build my own electric skateboard and I have one question Which motors will be the best, How do you think?
good video and thanks a lot! I was searching that is 500 kv ok for e skateboard.
Est-ce que l'ESC supporte le reverse?
I generally downvote videos where people don’t wear a helmet
Wow 😳 for a 6s you are zipping by! LOL, even with the motorcycles 🏍. I've just recently built my first board which is a 10s 5000 mah. I hope you'd come visit to see my diy tutorial. Goooo diy esk8!!
- Neil
Your totoriel is very good, I love your channel, so I subscribe and you?
Yup Neil Subscribed to you before you even asked thats how good your channel is ;)
- Kage
Can you comment the motor mount you used ty.
Hello, I made an electrick longboard. But I have a problem with the drive belt, the tooths on it wears out. My motor is 400 kv and I have a 2, 3s batterys in series(22.2 v). And my esc is 70 amps, but is there anything I can change in the esc software that makes the acceleration longer? Nice video !
The esc are configurable in acceleration to reduce torque at the start so as not to damage the transmission.
Mine is programmable with a USB card.
The belts are fragile and limited in strength. The chains are more efficient but noisy.
My acceleration is brutal, but I manage the acceleration with the trigger.
But I bought an esc programming card, but it is not changing with ¨very soft¨. shoud I buy an esc to usb adapter and try to program it with my computer?
Yes, you can try. I also have a problem with the programming of acceleration.
My esc must have a defect
stronger belt??
The belts are resistant if used correctly
Bonjour
Combien vous à coûté ce projet ?
Bonne vidéo
bonjour et merci, ce projet m'as couté 350€ au total, j'en ai fabriqué deux quasiment identiques mais le premier m'avait couté plus cher car j'avais pris du matériel de mauvaise qualité, l'esc avait grillé et m'avait aussi fait griller le moteur .
ha mince en tout celui ci a l'air pas mal et sans fil
oui il est super puissant, mais c'est dangereux car ça va trop vite, la télécommande est trés pratique en effet, merci pour ton intérêt.
Does it have enough power for hills
YES in my first video, I climb hill. With a 1000w motor, it is very powerfull .
Nice tension pully!! I don't think you're going 50 though lol
What deck?
What would the overall price of this be?
400$
70€ longboard
50€ motor
50€ esc
20€ transmision
20€ remote
50€ charger
90€ battery
now i understand, that we dont need to much torgue, 500kv is enough, more efective and more speed. I use same specification but 270kv motor, its to much torgue but to slow, just 25-30 km/h
Wich is better if im bit fat :D? 190kv, 270kv 400kv or 500kv?
Hilly Craft a friend who weight 90kg go at 53 kph whithout problem. 500kv have good torque and good speed. if you want more torque, use a lower kv but it reduce the top speed
Thank you so much, i will get 400kv couse its cheaper ... Subscribed
if you have any problem , tell me and i help you :)
So a 380kv is faster than a 270kv but the 270kv has a better torque?
yes
1 kv = 1 round per min with 1 volt
How much the battery during
30 kilometer
Marc Gyver thanks
6s 10 Ah --> 30 km range? I can't believe it. 50 km/h with 5045 Motor? 500 kv? Never ;)
how much for this electric longboard ?
400 $ with charger
nice :)
50kph, it's crazy, you've already fallen at this speed? You do not wear helmets
On my first prototype, I fell at 30 kph but never at 50kph because I rarely go to 50kph. And no I never put helmets;)
How do i build it
I made an (how to make) on Instructables if you want.
www.instructables.com/id/50kmh-Electric-Skateboard/
clik bait 50 kmh
Try it my friend and you gonna see :)
It's indeed hard to believe on 6S and with such a small single motor...except if you weigh 45kg or less...Furthermore with only one small motor and only 6S...What gearing and wheel size do you use? It would be nice if you could use a speedometer to measure the speed. I have a dual 270KV 5065 10S5P --> 50kmh with 97mm wheels and a dual All terrain board with 7 inch tyres and 6355 motors and 190KV : 44kmh.Both have 10S5P batteries 10000mah and the max range i can get is 25km with the smaller wheels.Riding an eboard seems fast but that doesn't mean you are really doing 50kmh.That's just not possible with such a high KV and such a low voltage+ i suppose you used 10000mah multistar high capacity lipo's who have a rather low discharge rate...MAke us a pleasure and use a speedometer in your next video's ;-)
Grtz man
500KV motor?? you can instal this motor in your Rc plane toy dude :P:P heheh
and then you will get 50km/h
Can i haf IT pleas pleas
😎
Boal speed 56kmh
50km/h my ass
What for a Bschisser. That's never fünfzgi km//haha.
Please give me :c
Music is Cancer.
NCS
aq