English not being your primary language makes your explanations SUPER EASY to understand, English is also my secondary language and all your tutorials are excellent and simple! Thank you very much!
Yeah sure! It looks so easy when you master are doing it but in practice is much more difficult when it comes to spline! Loft command is maybe the easiest and most straightforward 3d command but when you have to extrude or loft on a path is very difficult when you have to change the XY plane in space. I found the easiest method to be the new ucs, then select x and y axis according to the plan you want to draw into because this way you will have only two axis to look after and dont have to pay attention to the z axis, using left, right, front, back...etc looks much more difficult to me! I am just a beginner in AUTOCAD btw and the extrude/sweep along a path seemed the most difficult thing to me so far! Nevertheless you are a genious! Can I email you a 2d plan building which made my Autocad crash in 2 versions (2017 and 2021) when I tried to press pull the windows? I've tried it on my desktop as well and autocad froze again, the drawing is pretty simple with only 4 rooms, I dont know why Autocad is acting like this. Maybe you can help me figure it out. Thanks alot in advance! Keep up with the good work!!
May be it's too late as a response, but I think you to make sure that all the 2d drawing areas are fully closed using boundary command, then make sure that z axis is in extrude direction using ucs command.
Heyyyyyyyyyyyyy You the best teacher for this area.........
Glad you think so! 😊
English not being your primary language makes your explanations SUPER EASY to understand, English is also my secondary language and all your tutorials are excellent and simple! Thank you very much!
I want to thank you sir from bottom of my heart....
It's because of you today I'm working in design in a Defence Company....
You are welcome
Where are you working brother
@@yashgautam4874 In a Defence Company....
Tell name of the company
I have used AutoCAD for more than 2 decades. Nice to see it still going strong.
THIS WAS SUCH AN EXCELLENT GUIDE
Thank you 😊❤️
nice explaining sir thanks for supporting poor people like me,. we don't have to pay more amounts for training - i can start learning from your videos
You're welcome 😊
This is so amazing that how u teach these tutorials in an easy way. ❤️
Thank you
Thank you sir, your tutorials are easy and straight to the point! Now I'm a fan of this channel! =)
You're welcome 😊
You deserve a medal, thanks.
You are welcome
Explanation is very clearly thank you so much 😊
Incredible! You may have saved a project of mine that was defeating me!
Glad I could help!
I AM IN LOVE WITH YOU MARRY ME OMG YOU JUST SAVED MY PROJECT AND MY SANITY 😭🙏
3D Loft command is explained in very simple method.👌👌👍
Thank you 😊. Please subscribe to get new video notificatio.
Bahut khub ❤️
Thank you 😊
Thank you very much sir, I'm from Indonesia
Such a great tutor 👍
Thank you so much broader 🙌
Superb teaching sir ji
You are best my teacher!
Thank you
thanks for the tutorial!!
You're welcome 😊
Perfect explanation and thank u
You're welcome 😊
wow thank you
great tutorial
You're welcome 😊
great teaching n skills of autocad ...😍
EXCELENT!!!! Thanks a lot.
You're welcome 😊
Thank you ❤❤❤
Excellent thanks 🙂
You're welcome 😊
thank you for this video and its very appreciated to me for easy way
Gooooood... From Italy
Thank you 😊. Please subscribe to get new video notification.
Good & amazing tutorial. Thank you so much!
You are welcome
Great video! Explained really well.
Thank you a lot !!!
You are welcome 😊
Good Example for using loft command in solidworks,Thank you
Sir when i give path the line which is created by loft erases out. May I know why?
Perfect. Helpful
Thank you 😊
Thank you 🙏🙏
Raj Sir it reminds me of your class in the very beginning
Thanx. is there no Twist for Loft?
Muito bom !Bem explicado, excelente exemplo de aplicação , ótima explanação e conclusão.Felicidades a todos .
thank you so much
You're welcome 😊
جزاك الله خير ياخوي
شرح سهل وسريع وسلس
Muito boa aula continua assim Deus t abencoe
Claro, obrigado
Superb 👌👌👌
Thank you , sir
Thanks sir 🙏
You're welcome 😊
Thankyouuu 😊
You're welcome 😊
Very helpful 👍
when is good, is good!! TK
Thank you very much...
great video
Thank you 😊
5:00 after selecting path it say not valid.. What should i do now
Don't use very complicated path
Good illustration
can you tell me sir why, I cannot make object like you ,it is showing--" The selected entities are not valid, "
Very well young man
Thank you.
Thanks to much
Yeah sure! It looks so easy when you master are doing it but in practice is much more difficult when it comes to spline! Loft command is maybe the easiest and most straightforward 3d command but when you have to extrude or loft on a path is very difficult when you have to change the XY plane in space. I found the easiest method to be the new ucs, then select x and y axis according to the plan you want to draw into because this way you will have only two axis to look after and dont have to pay attention to the z axis, using left, right, front, back...etc looks much more difficult to me! I am just a beginner in AUTOCAD btw and the extrude/sweep along a path seemed the most difficult thing to me so far! Nevertheless you are a genious! Can I email you a 2d plan building which made my Autocad crash in 2 versions (2017 and 2021) when I tried to press pull the windows? I've tried it on my desktop as well and autocad froze again, the drawing is pretty simple with only 4 rooms, I dont know why Autocad is acting like this. Maybe you can help me figure it out. Thanks alot in advance! Keep up with the good work!!
May be it's too late as a response, but I think you to make sure that all the 2d drawing areas are fully closed using boundary command, then make sure that z axis is in extrude direction using ucs command.
I cannot do command LOFT over a path. It appears "Selected entities are not valid." What is wrong?
Oh, I see! I've forgotten to JOIN the portions of the path.
Ty❤❤❤
Ору с этого акцента. Индусы - топ!
Why mine doesn't have shadow when I used loft command
path and guides doesnt work for me. btw im using 2012 version
Try to create less complicated path and smaller section.
Pretty clever tool.
good one my friend
Which windows version are you using?
Windows 7
Hi, How do you join or unite 3D array with 3D solid object?
Use UNION command
@@CADCAMTutorials does not work, I tried union, join but nothing. it says "at 2 solids, surfaces, coplanar regions must be selected"
Explode 3D array and Union
@@CADCAMTutorials sorry to bother you but still it does not work. is there any other way?
Please make more videos in solidworks and catia
How to control the surface density in LOFT command ?
Thanks
You are welcome
sir esme jo rectangular lofted part h uska devlopment kese bnega
Uskeliye aap ko solidworks ya phir dusara 3D software use karna padega
th-cam.com/video/AfpXTTi0R7U/w-d-xo.html
@@CADCAMTutorials sir two step lofted and only rectangular shape not circle
How to Find These Volumes???
I SOMEHOW FAILED ON THE SHELL COMMAND. BUT I HOPE FOR THE BEST AS I PRACTICE MORE
good keep going
Good !!
Thank you
Bro please make videos about CNC simulation
Tanks
eccellente
+Squaletto blu Thank you
Good
Wow
Thank you
As the rest of the world is using parametric software
Can you l
Teach me AutoCAD ?
ГОСПОДИ ХРАНИ ИНДУСОВ
CONTOLL
Thanks
thanks
Thanks