Great. I always enjoy to watch your videos. They are inspiring and entertaining. And they show the key parts of the work. And this make them not tedious and unique.
Exelente video, grato por compartilhar, gostaria de saber qual corrente foi usada para soldar as peças? Qual a medida do eletrodo de tungstenio e a cor? Desde ja agradeço por sua atenção e seus excelentes videos 👍👍👍👏👏👏
Hola, hace tiempo que sigo sus videos y me parecen geniales, quiero aprovechar para preguntarte qué tipo de gas utiliza en su máquina de soldar?? Agradecido por compartir conocimiento.
Excellent video, grateful for sharing, I would like to know which chain was used to weld the parts? What is the tungsten electrode measurement and color? Thank you in advance for your attention and your excellent videos 👍👍👍👏👏👏
Já deixei um like pro seu vídeo. Amigo tem dois canais TH-cam que usam as mesmas cores que você usa nos seus projetos os canais são Tado Creation e Fawa Bros
From my point of view there are two design flaws that comes to mind immediately. 1. The weak point on the vice is where the hinge for the jack is. The "pointy" metal gusset is where you will bend/damage the steel depending on what force you apply to your jack. The two sides/gussets can be made much stronger. Instead of an "L" shape, you can add a "triangle" from where your gas struts are down to the pivot point of your jack. 2. When your steel is clamped, the top is not horizontal. So it is not practical if you want to drill straight vertical holes etc in your work piece. You will have to drill at an angle to drill a vertical hole through your work piece. Other than that I applaud you for the mechanics and thinking outside of the box
A spring around the bottom pivot similar to a garage door spring would give you more clearance for depth Other than that I’d say great design might have to build myself one for the welding forging area of the shop (Can never have enough vices around the compound
Maravilhoso macaco um ótimo trabalho temos que sempre inventar para melhorar vou dar uma opinião os dois amortecedores poderia colocar no pé do macaco para que o centro do macaco ficar livre somente uma ideia
Nice one but I see design flaw - you should make solid jaw on yellow part and moving jaw on the red one - now you can not fasten anything straight upright - so wider so mo leaning...
Very very cool job
Greetings, I wish you safety, success and a good and nice day
Abdullah from the State of Kuwait
Thank you so much!
PARABÉNS VCS SÃO MUITO CRIATIVO E DE DA INVEJA O TRABALHO DE VCS.
Very very good👍
Thank you!
Estupendos trabajos felicidad es
Thank you!
Да получилось супер! Хорошая работа
Thank you so much!
buen trabajo amigo y sin propaganda
Thank you!
Sangat Quality cara anda membuat kerja. Super good bro 👍🤝 indonesia 🇮🇩🇮🇩🇮🇩
отличные тиски получились...как и все самоделки 30 полуляхов из двухсот пятидесяти моя оценка)))
Sorry, I don't fully understand your opinions!
Wow nice built impressive
Thank you so much!
Desde Arauca Colombia lo felicito hermano.
Thank you so much and welcome!
Clever and talented man with excellent skills.
Thank you so much!
Good job professionally done well done my friend
Thank you so much!
Amigo exelente trabajo y se puede vender esta maquena de me dereccion
Sorry! I don't sell.
Impresionante trabajo!! Muy bueno!!
Thank you so much!
Good video, excellent, huge hug from my humble Uruguayan channel.
Thank you and welcome!!!
Parabéns!!! Genial...
Thanks!
It is really a very useful invention 😊.
Your working style is very heart touching.
Many thanks for your support!
Another vice, damm you got some VICES. Keep them coming. Well done guys.
Thank you!
Good videos brother 👍👍
Many thanks, bro! How about you?
Very cool, looks very effective and efficient 😎👍
Great. I always enjoy to watch your videos. They are inspiring and entertaining. And they show the key parts of the work. And this make them not tedious and unique.
Cool :D
Thank you!
Exelente video, grato por compartilhar, gostaria de saber qual corrente foi usada para soldar as peças? Qual a medida do eletrodo de tungstenio e a cor? Desde ja agradeço por sua atenção e seus excelentes videos 👍👍👍👏👏👏
Super
Hay nhưng nó bị vướng mắc quá em ơi ,em nên thiết kế một góc độ phù hợp hơn
Many thanks for your opinions!
hi,really nice video,do you have a plan with the measurements please?
Thank you! Please see all measurements in video help me! I showed them very detailly in this.
Hola, hace tiempo que sigo sus videos y me parecen geniales, quiero aprovechar para preguntarte qué tipo de gas utiliza en su máquina de soldar??
Agradecido por compartir conocimiento.
I use argon air.
👍
Excellent video, grateful for sharing, I would like to know which chain was used to weld the parts? What is the tungsten electrode measurement and color? Thank you in advance for your attention and your excellent videos 👍👍👍👏👏👏
Thank you!
Very nice videos on ur channel👍👍👍
Ur welding tig or mig?
It’s TIG welder.
me gusta...
Thank you!
احسن فكرة
Thank you!
Great
Thank you!
Já deixei um like pro seu vídeo. Amigo tem dois canais TH-cam que usam as mesmas cores que você usa nos seus projetos os canais são Tado Creation e Fawa Bros
Like your opinions. These are my friend’s channel. They have many interesting projects. Many thanks for your supporting!!!
Nice
Thank you so much!
That's very nice, but with the price that I would pay for this much metal here in Brazil I could buy a new one.
Thanks for your opinions. Everybody can use scrap and old hydraulic jack to make it. It will very cheap.
@@KwandoTechnic I'm already talking about scrap haha but I get the idea and it's very nice
@@YuriNGolfeto thank you!
From my point of view there are two design flaws that comes to mind immediately.
1. The weak point on the vice is where the hinge for the jack is. The "pointy" metal gusset is where you will bend/damage the steel depending on what force you apply to your jack. The two sides/gussets can be made much stronger. Instead of an "L" shape, you can add a "triangle" from where your gas struts are down to the pivot point of your jack.
2. When your steel is clamped, the top is not horizontal. So it is not practical if you want to drill straight vertical holes etc in your work piece. You will have to drill at an angle to drill a vertical hole through your work piece.
Other than that I applaud you for the mechanics and thinking outside of the box
many thanks for your opinions!
please also give the dimensions of which project you are shown....
A spring around the bottom pivot similar to a garage door spring would give you more clearance for depth
Other than that I’d say great design might have to build myself one for the welding forging area of the shop
(Can never have enough vices around the compound
Maravilhoso macaco um ótimo trabalho temos que sempre inventar para melhorar vou dar uma opinião os dois amortecedores poderia colocar no pé do macaco para que o centro do macaco ficar livre somente uma ideia
Many thanks for your opinions!
Hello I am a mechanical and i want to make this hydraulic vise. Can you tell me what is the thickness and size of the iron plate 0:01 0:08
Nice one but I see design flaw - you should make solid jaw on yellow part and moving jaw on the red one - now you can not fasten anything straight upright - so wider so mo leaning...
Many thanks for your opinions.
👍
رائع
Thank you so much!
Ok
У меня заводские тиски, намного удобнее и красивее.
Yes, it's only one invention!
Да, за это лайк. Очень оригинально и тоже красиво, главное работает.
🤔