I know this is an old video but i'm gonna comment anyways. You sound very similar to myself. 1 day I just got the 1911 bug. And said i'm gonna go out and get one. Now i did some research before I went out, the inexpensive and/or the expensive. First shop I walk into is a local shop where I know the people that run the shop well. I say hi to them and as I walk up to the first shelf, There is the Ruger in Sr 1911. Sitting there the exact one that you have in this video. I own firearms from multiple different companies and more than 1 or 2 of them are Rugers. I looked at it and within 15 seconds. I said to the shop owner I'll take it. I got a shoulder holster for it from a european company . A craft holster nineteen eleven shoulder holster vertical roto holster. With two magazine backups under the other arm , the right arm. I highly recommend that holster for this pistol. Everything you said in the video was one hundred percent. I think personally this is one of the most stylish nineteen eleven's ever made. Its quality is a hundred percent as well. I picked up this gun and shot better with this right off The bat, than any gun I've ever picked up and I'm a very good shot with other pistols as well. What i'm saying is is that it took a lot of practice with other pistols to get good with them, this pistol is like a third arm. And the trigger on it is excoptional . if anybody says otherwise , they have no idea what a good trigger is. you can quote me on that. Also like you were saying in the video the finish of the gun, It's deep cuts in the slide, the beautiful wooden grips, exceptional.
I’m glad you have had an awesome experience with it. Mine has never let me down, never been fussy with any ammo. It’s just a well built, slightly customized 1911. Now if we could just get Ruger to stop raising their prices…but anyway, I’m glad you like it! I still have mine.
The sights are steel and authentic Novac sights. The target model has ambi safeties, but you lose the 3 dot sights. Ruger has set the standard for customer service. I've sent in a couple of handguns and they repaired them for free. Turn around time was a couple of weeks.
This is by far one of the better gun review videos I've seen recently. I do love my SR1911, but specifically in regards to the video quality/explanation, great job.
@@travisp11 Thanks for the response back! I've watched dozens of gun reviews from different youtubers, but your reviews are thorough and fluent. I've been going through your channel and you have loads of great vids! You've gained a new subscriber.
BIG COUNTRY TX Thanks man and you take care and welcome to the channel! I’m a bit long winded in some of my reviews but a lot of it has to do with covering the details people usually ask me after I post a video. Thanks!!
I got one for my birthday last week (thanks to a wife that kicks ass) and went to the range yesterday. Just shot 100 rounds but had 3 inch groups or so at 15 yards. Very accurate for me. Feels fantastic, great trigger, 100% American made, good price, looks so bad ass. What more do you want??????
I have ever version of the SR1911 that RUGER makes....they all run flawless. So far i have not had a single FTF in any one of them. All guns have over 1,000 rds through them.
Nice review, I have the SR1911SS 10mm Target. The very first time at the range, I tried five different ammos. Blazer aluminum case, Sellier&Bellot, Armscor, Sig Sauer and Underwood. All FMJ, of course. The Ruger's performance was flawless with every one of them. And there was no need to adjust the fully adjustable sights, our range is 40 ft max and that's where I started. Are there better 1911s out there? Yes, there are but for the money Ruger gets my vote. BTW, that same day I also was firing my other 10mm. It would ONLY fire the Blazer aluminum and the very expensive Underwood. About 600 rounds later, the RIA High-Capacity is almost broken in.
For an OWB holster the El Paso Saddelry "Tortilla" with a thumbreak for that added bit of safety carrying cocked & locked is the best I've ever found. Great leather, rides high & tight to the body & you can get them plain, basket weave, fish scale etc engraved. I always get Basketweave & man they are tough & don't show any wear compared to the plain leather ones. For IWB I have found the DeSanti "Cozy Partner" to be the best. Leather also, full sweat guard, two snaps that go over the belt so you don't have to undress to put on & off. Plus they have wings on the sides of the bottom of the holster to keep them in position on your body. They make them in 2 sizes, I use one for my short barreled 3" Colt "Defender" & my Springfield EMP 3" 9mm also. The other holds my full size 1911's PLUS fits all 3 of my Browning Hi-Powers to boot. Thee most comfy & only IWB holster I can wear all day without discomfort. Those 2 DeSanti "Cozy Partner" holsters hold 5 of my 6 --- 1911's & 3 Browning Hi-Powers with total comfort. 8 pistols with just 2 holsters. P.S. never stick a beautiful 1911 in a plastic / Kydex / Tupperware holster !! The 1911 Gods will be waiting for you at the gates for Blasphemy my friend.
I agree with you 100% about Kydex. That is a no no for my stainless/brushed finished guns. I will order a holster from El Paso Saddlery as they sound like a good outfit to go with
Hello, I wanted to buy a pistol and I am actually confused if I should buy the Ruger SR1911 or the Ruger American pistol. What do you advice me to buy?
The Ruger American is a semi auto pistol available in 9mm. It has a polymer and metal build and holds more rounds than the SR1911 which is an all metal pistol chambered in .45ACP or 10mm. Go to the gun store and pick out the one that you think will serve you best.
Travis, Very well done and informative video. No cat or dog getting into the video like some product reviews do. I'm new to gun's so I'll watch a video that is slower so it all sinks in. . Most will really appreciate not having their valuable time wasted. Love my new Ruger and excellent video tiger...
Every time I start to compare it always comes down to company A and a Ruger, with the Ruger being 2-300 dollars less. GP-100 and my AR-556 are my Rugers.
@@knowbody9679 The Security 9 is a good pistol, too. They are similar in size and capacity to the G19. I also love the old Ruger 9E which was a budget friendly version of the SR9. Overall, I have yet to have any issues with their firearms.
Just started the process of buying mine. Will be my first pistol. Interestingly I don’t think mine is coming with a hard case. I think it comes in a box and inside of that a soft zip up case.
I dont know if mine was a limited time thing or what it was but you could at one time but the hard case from the online Ruger store. It is a definite bonus.
Just got mine! I was possibly thinking of a Springfield Armory or a Kimber 1911 and those are great pistols but at the end of the day, Ruger wins. I'm quite partial to Ruger and Smith & Wesson.
@@travisp11 hey I did some research I can just buy the 7 round mags that don't have the flared magwell, the ones with the magwell sticking out the bottom are 8 round mags. Nice review tho I'm picking mine up tomorrow!
Great video. I have had my Ruger SR1911 for 2 issue free years. I fully agree with the less then average felt recoil on this gun. I used the discount coupon that came with mine in the cardboard box to add the Ruger Eaglewings grips to mine. Looks better than the stick grips.
Always wanted a 1911 and just purchased a used Ruger SR1911 45 acp. I have heard that some have had a problem with the front site coming off is this true. I haven’t had a chance to take it to the range as of this time. Any information would be appreciated.
I haven't had any issues and I have out a few hundred down the pipe so far. I've had front sights pop off of a few brands on this channel, it just happens and I wouldn't say it a particular problem on any one given model.
@@thomasmangi1618 if the sight comes out it may need to be replaced because I believe it is dovetailed in there tightly. If it does come out, something was not finished to the proper spec. I’d contact Ruger and ask for a replacement sight.
Nice case. My sr1911 cmd came in the ol’ box. Looked all over the web including Ruger but can’t find a case like the one you have. Case looks like the same as fn fnx 45 acp comes in. Obvious it’s for fnx not for the sr1911. You where lucky with the additional case. Good deal and informative vid. Thanx !
Ruger had the cases for sale on their website a few months ago on thier website. These may have been a limited run because every other ruger that I have ever purchased came in the same cardboard white box.
This will be the 3rd sr1911. Standard, cmd, and officer 45 acp. The commander (cmd) is on order. Expecting it end of this week - in probably, you guessed it , a cardboard box. That’s ok, it’s what’s in the box that counts ! Thanx on the response.
Ruger box came in 3 days ago and a cmd 45. Tossed the cmd kept the box ! Just kidding. CMD did arrive and picked up 3 days ago. Ruger factory made sure the weapon worked. Must of used black powder. Didn’t get to the range yet. Pretty ruff weather for past 2 days.
@@travisp11 hmm, yea could be. My gp-100(7 shot model) came with a nice hard plastic case. And I just got it recently, so you may be right. Ruger does have nice factory gun cases though. I really like the bag that came with my 10/22(breakdown). Plus you get the cool Ruger Logo that's missing from aftermarket gear👍😁
Bro, I dunno. Mine came from the factory in that plastic hard case and has all of the factory stickers on it. Ruger does or did sell that same case and you could order it by itself but Im not sure if it is still on their website.
@@travisp11 haha just looked while watching video, nope. Maybe it was a promotional thing idk. They got plenty of those zip up cases that don't really protect. Cool case video, lucky you 😁
Every Ruger 1911 I’ve handled has a very weak click on and off of the thumb safety. Ended up selling mine for that reason. Otherwise it’s a great 1911.
You should have tried a different plunger spring, or at least try to see if there was any debris in the plunger tube that impeded the movement of the spring :)
My husband passed away this Nov. this was always his go to pistol. Great review!
Thank you for watching and I am sorry to hear about your loss.
Sorry for your loss. Man of good taste.
He had good taste... One of my favorites as well... So sorry to hear of his passing.
Sorry for your Loss I'm sure he was a Good man and A better Husband my condolences are out to you and your Family
Sorry for your loss and congratulations for your gain of the pistol
I know this is an old video but i'm gonna comment anyways. You sound very similar to myself. 1 day I just got the 1911 bug. And said i'm gonna go out and get one. Now i did some research before I went out, the inexpensive and/or the expensive. First shop I walk into is a local shop where I know the people that run the shop well.
I say hi to them and as I walk up to the first shelf, There is the Ruger in Sr 1911. Sitting there the exact one that you have in this video. I own firearms from multiple different companies and more than 1 or 2 of them are Rugers. I looked at it and within 15 seconds. I said to the shop owner I'll take it. I got a shoulder holster for it from a european company . A craft holster nineteen eleven shoulder holster vertical roto holster. With two magazine backups under the other arm , the right arm. I highly recommend that holster for this pistol. Everything you said in the video was one hundred percent. I think personally this is one of the most stylish nineteen eleven's ever made. Its quality is a hundred percent as well. I picked up this gun and shot better with this right off The bat, than any gun I've ever picked up and I'm a very good shot with other pistols as well. What i'm saying is is that it took a lot of practice with other pistols to get good with them, this pistol is like a third arm. And the trigger on it is excoptional . if anybody says otherwise , they have no idea what a good trigger is. you can quote me on that. Also like you were saying in the video the finish of the gun, It's deep cuts in the slide, the beautiful wooden grips, exceptional.
I’m glad you have had an awesome experience with it. Mine has never let me down, never been fussy with any ammo. It’s just a well built, slightly customized 1911. Now if we could just get Ruger to stop raising their prices…but anyway, I’m glad you like it! I still have mine.
The sights are steel and authentic Novac sights.
The target model has ambi safeties, but you lose the 3 dot sights.
Ruger has set the standard for customer service. I've sent in a couple of handguns and they repaired them for free. Turn around time was a couple of weeks.
Nice!
My rear sight popped out first time shooting it ☹️
This is by far one of the better gun review videos I've seen recently. I do love my SR1911, but specifically in regards to the video quality/explanation, great job.
Thanks! This is pretty typical of my tabletop reviews. I absolutely love this 1911!
@@travisp11 Thanks for the response back! I've watched dozens of gun reviews from different youtubers, but your reviews are thorough and fluent. I've been going through your channel and you have loads of great vids! You've gained a new subscriber.
BIG COUNTRY TX Thanks man and you take care and welcome to the channel! I’m a bit long winded in some of my reviews but a lot of it has to do with covering the details people usually ask me after I post a video. Thanks!!
Just got this as a birthday present.
You are very lucky! They are awesome pistols.
travisp11 I am very lucky. 😊 Kicks like a horse.
just bought myself one for my birthday too.
Robert Warren Happy Birthday and great present!
I got one for my birthday last week (thanks to a wife that kicks ass) and went to the range yesterday. Just shot 100 rounds but had 3 inch groups or so at 15 yards. Very accurate for me. Feels fantastic, great trigger, 100% American made, good price, looks so bad ass. What more do you want??????
It is an awesome 1911!
You got one hell of a wife buddy! Sounds like a great woman to me
Thatboy21 420litme indeed she is I def got lucky! Thanks
I love window shopping on your channel.
And that is why we are here!
I have ever version of the SR1911 that RUGER makes....they all run flawless. So far i have not had a single FTF in any one of them. All guns have over 1,000 rds through them.
They offer a lot for the money. The build quality is amazing, too.
Thank god you went wit a TOTALLY American made 1911! Congrats
THanks!
Nice review, I have the SR1911SS 10mm Target. The very first time at the range, I tried five different ammos. Blazer aluminum case, Sellier&Bellot, Armscor, Sig Sauer and Underwood. All FMJ, of course. The Ruger's performance was flawless with every one of them. And there was no need to adjust the fully adjustable sights, our range is 40 ft max and that's where I started. Are there better 1911s out there? Yes, there are but for the money Ruger gets my vote. BTW, that same day I also was firing my other 10mm. It would ONLY fire the Blazer aluminum and the very expensive Underwood. About 600 rounds later, the RIA High-Capacity is almost broken in.
I pick up mine tomorrow. Hell, yeah!!!
You are gonna like it! Shoots like a dream. Smooth, low recoil. Just awesome!
@@travisp11 Thanks for the reply. I can't wait to shoot it.
Awesome review!! 😎🤓mines on the way!!!!. And a tucker gun leather holster!
That's awesome!
Ruger makes a great 1911. I have a full size and CMD in .45 and a 10mm. Changed out the front sight on all three to Dawson fiber optic.
I may need to look into those front sights! My SR1911 is such a smooth shooter!
Just ordered one it'll be here next week. I'm 35 and more excited than a kid waiting for Christmas
It is such a sweet pistol. Check out my cleaning video on it over on my channel!
Just bought mine itll be here this week and im 23 🤣 $1060 total first gun
45 acp full size :)
@@travisp11 and it shoots so nice right out of the box. Who needs a Wilson..
@@sgtstedanko7186 SR1911 is an awesome 1911 that I have to agree. Nothing about this gun is junky or cheap.
I want one so bad, I have a springfield mil spec defender model 1911, but 1911's are so addicting.
They certainly are!
It's in your blood now. I am actually not sure exactly how many we own. Welcome to the addiction!!😅
That is the cleanest design I have seen in a 1911 DROOL...
British Comedy Bronco Rothschild Triple Agent it is an awesome pistol!
Stop telling me to buy guns. I've already had to stop getting my heart medicine refilled to pay for the last couple you told me to buy.
Sorry man!
If you have heart failure who gets your guns?
For an OWB holster the El Paso Saddelry "Tortilla" with a thumbreak for that added bit of safety carrying cocked & locked is the best I've ever found. Great leather, rides high & tight to the body & you can get them plain, basket weave, fish scale etc engraved. I always get Basketweave & man they are tough & don't show any wear compared to the plain leather ones. For IWB I have found the DeSanti "Cozy Partner" to be the best. Leather also, full sweat guard, two snaps that go over the belt so you don't have to undress to put on & off. Plus they have wings on the sides of the bottom of the holster to keep them in position on your body. They make them in 2 sizes, I use one for my short barreled 3" Colt "Defender" & my Springfield EMP 3" 9mm also. The other holds my full size 1911's PLUS fits all 3 of my Browning Hi-Powers to boot. Thee most comfy & only IWB holster I can wear all day without discomfort. Those 2 DeSanti "Cozy Partner" holsters hold 5 of my 6 --- 1911's & 3 Browning Hi-Powers with total comfort. 8 pistols with just 2 holsters. P.S. never stick a beautiful 1911 in a plastic / Kydex / Tupperware holster !! The 1911 Gods will be waiting for you at the gates for Blasphemy my friend.
I agree with you 100% about Kydex. That is a no no for my stainless/brushed finished guns. I will order a holster from El Paso Saddlery as they sound like a good outfit to go with
really glad your happy with your 1911
King Pin Man, I love it!
I always watch reviews after I buy the gun
I tend to watch a ton before I buy but either way, thank you for watching!
Nice pistol i’m thinking of getting a 1911 in 10 mm and I’m Dancin back-and-forth between the the Ruger or the delta elite
Slim Cowboy Both excellent choices!
Same box my mark iv 22/45 lite came in.
Cool! This must have been a limited run kind of thing.
Hello, I wanted to buy a pistol and I am actually confused if I should buy the Ruger SR1911 or the Ruger American pistol. What do you advice me to buy?
The Ruger American is a semi auto pistol available in 9mm. It has a polymer and metal build and holds more rounds than the SR1911 which is an all metal pistol chambered in .45ACP or 10mm. Go to the gun store and pick out the one that you think will serve you best.
Go to a gun store and hold them both. You will know.
Travis, Very well done and informative video. No cat or dog getting into the video like some product reviews do. I'm new to gun's so I'll watch a video that is slower so it all sinks in. . Most will really appreciate not having their valuable time wasted. Love my new Ruger and excellent video tiger...
Right on! Thank you for watching!
Every time I start to compare it always comes down to company A and a Ruger, with the Ruger being 2-300 dollars less. GP-100 and my AR-556 are my Rugers.
They are solid!
This is now on my wishlist.
They really are nice. It has a fit and finish that rivals more expensive 1911s!
travisp11
I love glocks but am recently turned on to Ruger. I bought a Ruger American 9 mm. And now I’m a huge Ruger fan. Great American company
@@knowbody9679 The Security 9 is a good pistol, too. They are similar in size and capacity to the G19. I also love the old Ruger 9E which was a budget friendly version of the SR9. Overall, I have yet to have any issues with their firearms.
Excellent review!
Thanks!
Great vid Travis!!!...
Those groups were pretty sweet
She ran well!
@@travisp11 I see!!! Can't wait to get my hands on one
Just started the process of buying mine. Will be my first pistol. Interestingly I don’t think mine is coming with a hard case. I think it comes in a box and inside of that a soft zip up case.
I dont know if mine was a limited time thing or what it was but you could at one time but the hard case from the online Ruger store. It is a definite bonus.
@@travisp11 Hell yeah, that looks like a pretty nice case. I like that Glock always give you one.
@@JG54206 I agree.
Damn! Was the accuracy test @10yds done off sand bags? That pistol should have shot much better than that
Standing accuracy!
I need to get one of these just got a shield 40 and been wanting one in 1911
4wheeling sleding brapp it is a great 1911! Fit and finish is awesome.
Just got mine! I was possibly thinking of a Springfield Armory or a Kimber 1911 and those are great pistols but at the end of the day, Ruger wins. I'm quite partial to Ruger and Smith & Wesson.
The SR1911 is an awesome gun and the fit and finish are top notch.
Looks great Trav!
Spencer Morris Thanks man!
I just bought mine and ejector it’s a little bit loose is that normal
Mine has a tiny bit of play. I just checked. Maybe 1/8" of an inch from side to side but it feels solid.
WOOO!
Yeah buddy!
Any idea of where to find one of these online? It is so hard to find one right now
Try Scheels.com but to be honest, this is one of the worst times ever to try and find the firearm that you want.
Also, try going to gun.deals and type in SR1911 and see what comes up.
Can I remove the magwell from the magazine? The bulky black thing is ugly to me I want it to be smooth
The Nameless Enigma I’m not sure. I’d hate to see you break the mag
@@travisp11 hey I did some research I can just buy the 7 round mags that don't have the flared magwell, the ones with the magwell sticking out the bottom are 8 round mags. Nice review tho I'm picking mine up tomorrow!
The Nameless Enigma yeah, the 7s fit flush but the 8s need that additional space.
Great video. I have had my Ruger SR1911 for 2 issue free years. I fully agree with the less then average felt recoil on this gun. I used the discount coupon that came with mine in the cardboard box to add the Ruger Eaglewings grips to mine. Looks better than the stick grips.
Steve Bardfield Nice! Thanks for watching!
bought mine last 2013, broke my front sight and replaced it with truglo sights, runs all the time even with reloads.
They are solid 1911s and I dont regret buying mine at all.
"all the things you need, documentation"
Me a Nevadan. "Nah"😂
dat boi I was just referring to the instruction manual and basic paperwork they include with the firearm.
Always wanted a 1911 and just purchased a used Ruger SR1911 45 acp. I have heard that some have had a problem with the front site coming off is this true. I haven’t had a chance to take it to the range as of this time. Any information would be appreciated.
I haven't had any issues and I have out a few hundred down the pipe so far. I've had front sights pop off of a few brands on this channel, it just happens and I wouldn't say it a particular problem on any one given model.
@@travisp11 when it occurs is it easy to repair on this gun or did you have to totally replace the front site?
@@thomasmangi1618 if the sight comes out it may need to be replaced because I believe it is dovetailed in there tightly. If it does come out, something was not finished to the proper spec. I’d contact Ruger and ask for a replacement sight.
Man mine came in a cardboard box 🤣. Great video 👍🇺🇸
I believe the case is available from Ruger.
Mine too
Why did this one come in a hard case ? Mine came in a cardboard box ? Thats so weird
It may have been a dealer exclusive. Ruger was selling these cases about the same time that I made this video and you can buy them on eBay.
My two new mags are the 8 and 7 but they are not the same. The front and rear of the top is different. Anybody knows why ?
They may use a different spring so they need different followers or Ruger may have a different supplier for one of the two mags.
Good video. Great gun. Only 1911 I own.
Thanks for watching!
Id add the Ruger slim profile wood grips from the SR 1911 lightweight and thats it.. but thats just bc my hands arent that big
how much sir
I paid around $629 but the prices have gone up tremendously on these.
@@travisp11 they sell for over 900 as of 3/22/22
@@816_ce Yup. Ruger raised their MSRP on this gun and when I bought mine it was pre election time when gun sales were in a slump.
Nice case. My sr1911 cmd came in the ol’ box. Looked all over the web including Ruger but can’t find a case like the one you have. Case looks like the same as fn fnx 45 acp comes in. Obvious it’s for fnx not for the sr1911. You where lucky with the additional case. Good deal and informative vid. Thanx !
Ruger had the cases for sale on their website a few months ago on thier website. These may have been a limited run because every other ruger that I have ever purchased came in the same cardboard white box.
This will be the 3rd sr1911. Standard, cmd, and officer 45 acp. The commander (cmd) is on order. Expecting it end of this week - in probably, you guessed it , a cardboard box. That’s ok, it’s what’s in the box that counts ! Thanx on the response.
@@samsammy6210 I think I need to step up to the 10mm!
Ruger box came in 3 days ago and a cmd 45. Tossed the cmd kept the box ! Just kidding. CMD did arrive and picked up 3 days ago. Ruger factory made sure the weapon worked. Must of used black powder. Didn’t get to the range yet. Pretty ruff weather for past 2 days.
travisp11
10mm. Kinda of a quick round. Might be interesting. Guess your leaning toward Ruger. Can’t go wrong there.
I'm trying to decide between this and the sig emperor scorpion, anybody have any experience with the two?
I almost went sig...seems to be a solid choice from what I have read and see from owners and on reviews.
I own both...RUGER is just as good for less money.
Same model here but mine came in a cardboard box. ☹
Red Beard NJ I’m wondering if the plastic hard case isn’t something new Ruger is doing for this model.
@@travisp11 hmm, yea could be. My gp-100(7 shot model) came with a nice hard plastic case. And I just got it recently, so you may be right.
Ruger does have nice factory gun cases though. I really like the bag that came with my 10/22(breakdown). Plus you get the cool Ruger Logo that's missing from aftermarket gear👍😁
@@redbeardnj Interesting! I know that Ruger offers a hard plastic case for the SR1911, maybe they are going that route for other firearms, too.
Nice pistol...Good stuff...
Right on!
Can i ask how to ship my Ruger SR 1911 to be fix because im from the philippines
You will need to call Ruger or email them. I am guessing you would need to ship it using FedEx or DHL.
Dude! Why? How?
I didn't get a sweet box with my SR1911! I got a white cardboard box, WTH LOL
Bro, I dunno. Mine came from the factory in that plastic hard case and has all of the factory stickers on it. Ruger does or did sell that same case and you could order it by itself but Im not sure if it is still on their website.
@@travisp11 haha just looked while watching video, nope. Maybe it was a promotional thing idk. They got plenty of those zip up cases that don't really protect. Cool case video, lucky you 😁
I just got one today, came in the black box with red tabs.
Every Ruger 1911 I’ve handled has a very weak click on and off of the thumb safety. Ended up selling mine for that reason. Otherwise it’s a great 1911.
I'd say mine locks securely but doesnt require a tremendous amount of pressure to move but I do see why you sold yours.
You gotta' be kidding...
You should have tried a different plunger spring, or at least try to see if there was any debris in the plunger tube that impeded the movement of the spring :)
Does anyone else have a rattling noise coming from the grip safety?
The Nameless Enigma that may be my magazine.
It’s the trigger.
Regent looks like a great alternative to this for much less
Fair enough but I try not to buy Turkish manufactured firearms unless necessary.
Bro, I bought mine in 2018 and it came in the white cardboard box. Tf lmao.
I know that for a while, Ruger sold them on their website and they are on eBay now but I dont know if I got lucky or what.
delicious!
Absolutely!