I've got an 07 Tahoe and I'm about to do the same thing asap. I hate the way the nose slumps down. I feel so low to the ground. But then again I'm coming out a lifted truck!
I have an 07 Tahoe and my front end sits way lower than my rear! I have 26s on mine and it just doesn't look right. I think I will be doing this whenever I get the time. Thanks for the video!
I'm running 33'sx12.5r22 stock with a some offset to the wheels (not sure how much offset) but they rub like a mf i can only do a 1/4 turn to either side. I'm out here driving like a Swift driver
Yea I had an appointment tomorrow for a alignment also still have factory tires on it... Just didn't know if it could go out of alignment so bad to make it rub after the level other wise it drives looks and sounds fine.
Thanks. Some folks say the N2.0 Leveling Struts ride better but I reckon it's because the struts are new compared to whatever is on there truck already. How high?
Jesus Rios I have that same wheel and tire on mine right now with factory highs it runs only when I turn right at full lock on the passenger side wheel well cover so you’ll easily fit them with the 2 inch lift spacer
![⭐ฮิตในTikTok!! ( มะมะมะหมูเด้ง MooDeng ) Ver. แดนซ์ ReMix BY [ ดีเจกิต รีมิกซ์ ]](http://i.ytimg.com/vi/4noyAoMa7bQ/mqdefault.jpg)
Just ordered my leveling kit!!
How did it turn out
@@justingonzalez702 great! Looks a whole lot better and rides good too
I've got an 07 Tahoe and I'm about to do the same thing asap. I hate the way the nose slumps down. I feel so low to the ground. But then again I'm coming out a lifted truck!
Mr A.W yeah man I hated the way it sag in the front
I have an 07 Tahoe and my front end sits way lower than my rear! I have 26s on mine and it just doesn't look right. I think I will be doing this whenever I get the time. Thanks for the video!
Dominique Brown anytime brother glad that I could help
On stock height ??
that intro is insane!
oh it just keeps going...........
Thanks bro!
Imma try to do it on my 2007 tahoe
Frank Modesto you should it was super easy
How’s it holding up after all this time? Is the ride quality good still? I just bought this kit
It holded it up well, about to put a 4in lift on it
You dont have to change your control arms for this ??
No I didn't
Nice work bro
Thanks bro
did you need alignment
Can 285/50r20 fit on that with that kit
did u level the rear and front ? or just the front & how many inches did u level it ?
I kept it the same bro
Is that 3ton jack stand? I need to buy some not sure how heavy to get them
I'm running 33'sx12.5r22 stock with a some offset to the wheels (not sure how much offset) but they rub like a mf i can only do a 1/4 turn to either side. I'm out here driving like a Swift driver
Lol try the leveling kit and see if that helps.... funny because my brother n law a Swift driver
size tires?
Is the rear at the stock height or did you space that also ? Looks good.
Rear was at stock height
Does this have air ride or autoride
Just did mine, an reason i am getting tire rub in reverse while turning now? didnt really do it before and only getting it on the drivers side..
Jon Jones you might have to do an alignment..... you still have the factory tires on?
Yea I had an appointment tomorrow for a alignment also still have factory tires on it... Just didn't know if it could go out of alignment so bad to make it rub after the level other wise it drives looks and sounds fine.
Jon Jones that's sucks you are having that problem brother! And it just rubs when you back up?
yea only when i back up and turn.. but Ill get an alignment tomorrow and see if it changes...thanks for you reply and video it made the instal easy.
Jon Jones anytime brother that's what we are here for to help each other out... let me know how it turns out
Can I add a level kit on top of my 5
Inch kit
jarvis handy a 5 inch lift should already be leveled, usually a lift kit doesn’t lift the back as much as the front
No
Did u have to get an alignment after or no?
Yes i did bro
what is max tire size recommended with the 2" leveling kit?
For my tahoe 33's
Tron89 what size wheel did you put on it
I have 305/55/20 will 2 inch b enough?
Yeah two inch will be fine
@@teezy9904 u got a link from where u got urs ?
@@teezy9904 I know it’s 5 years ago lol I’ll post a link u tell me if u think good thx !
@@teezy9904 I have 2014 yukon xl
How's the ride ? How do you feel with the leveling kit?
It rides just like factory
@@teezy9904 do you sit up high with the leveling kit?
@@cruzjorge064 tbh I didnt noticed any difference how high I sit up... I didnt pay attention to that!!
Will you need an alignment after this?
Frank Modesto no and it still ride smooth like the first day I just bought it.....
Yes you need an alignment
Not with a 2 inch
Cute jack. Think my sister has one of those.
Thanks bro, 🤷🏽♂️
Is she Butch
It’s not as easy as they make it look! Passenger side took like 4 hours and the driver side like 39 minutes
Dang bro... why did it take 4 hours
It's been a little over a year now, how do you like it?
swathdiver it still riding smooth so i cant complain.... but im thinking about going higher though
Thanks. Some folks say the N2.0 Leveling Struts ride better but I reckon it's because the struts are new compared to whatever is on there truck already. How high?
swathdiver i want to put 35s so i was looking at the 5-6in lift
so with this modification can i fit 285/60/20 tires on my 2014 tahoe??
Jesus Rios I have that same wheel and tire on mine right now with factory highs it runs only when I turn right at full lock on the passenger side wheel well cover so you’ll easily fit them with the 2 inch lift spacer
The spacer i neeed put on the back too¿
Yazmin Garcia are you asking about the spacers for the back?
haha you were at bliss
Michael Vacanti im still am bro
Tron89 i left in 2016
Michael Vacanti yeah I got here in 2015
Tron89 ah ok. i got there in 12.. been looking at ideas of what to do to my 2011 avalanche ltz
Michael Vacanti nice... how big you trying to go?
Have u put bigger tires on it yet?
Kyle Hereygers I'm in the works on that but looks like won't be until after the new years though... I'll make sure I add a video of it!!!
tyron mathis looks really good though I like it!.... I have 09 Yukon planning on doing the same over the holidays
Kyle Hereygers nice, with the right tools it would take most of 30 mins tops
Hey, how you lift back suspension?
all it is is just a bigger spring and shock for the rear really easy to do
Can 285/50r20 fit on that with that kit
Yes sir
Do u need a alignment after this
100% you do. Your wheels are going to be a bit skewed towards each other after this type of lift.