construct a diagonal scale to show metre decimeter and centimetre when 1 metre is represented by 2.5 cm and long enough to measure up to 6 m also find RF show a distance of 2.55 m, 3.34 m, 4.44 m
construct a plain scale to show metre and decimeter when one metre is represented by 2.5 cm and long enough to measure up to 6 m also find rf show a distance of 3.5 metre
Wow sir man gaye apko maza aa gaya ,jo doubt tha clear ho gaya thanku very much sir .....I also subscribe your channel.for important video..thanku sir apne hamre marks katne se bacha liye 👍👍👍....thanku sir.....
Thank you so much for this helpful video, Sir ! What I had thought of doing was this : Divide the base line AD (D is the point where the 90° arc cuts AB when extended) into 9 parts and then taking each part (0-1, 0-2, ..., 0-9) as radius, draw an arc starting at AD(the line) and ending at AC(the arc) . My logic was that when you look at the line below AD having perpendiculars dropped from all the arcs, all the rectangular parts seem to be equal, so it should work out in the opposite direction (starting with the rectangles and then moving onto the arcs) also. I was thinking that this would also divide my quadrant ABCA into 9 equal parts, but it doesn't seem to work . Why is this so ?
Rishika... You gave written a long message..... Anyway I am sure that the method I explained is clear....... I have got to watch the video again to understand what I had I explained. And frankly speaking, even I have forgot the method.
@@ManasPatnaikofficial No Sir, you don't need to watch the video again, because my idea is different from what you taught . In short, my idea was to divide AB into equal parts and then produce angles by taking those parts as radii, which didn't work . But thank you so much !
I think what u say is also correct Rishika...only thing u need to careful about is finding point B which will be 6th point from point A ( which we come to know after seeing sirs final diagram). So in my opinion it can be done the way u said.
Sir your engg. drawing video is very helpfull to us and those engineer who want to learn engg. drawing very clearly... Sir, Which Software you use for engg. drawing???
Hi Tirthankar I am sure that these videos are helping u learn... Keep watching and do let your friends know about this channel so that they can also benefit....... And i make videos on powerpoint and autocad simultaneously....
Sir,do we need to draw the raw diagram in the main diagram while trisecting the arc as you have shown in the right side in large.And the 2nd qs is if there is given to measure a particular angle,then all the times do we need to draw the scale of chords?
another method is to simply divide the AB line into 9 parts (the same way it is done in plain scale). And then cutting arcs equal to the length of the subdivisions (that we get on the line AB) onto the AC arc . And boom we fet the least count as 10 degrees. Way simpler.
Hi Albinus......... Thanks for appreciating my work and do spread a word about this channel among your friends and classmates so that they can also benefit.
6
23. Construct a scale of chords showing 5 degrees divisions and with its aid set-off angles
of 25 degrees , 40 degrees 55° and 130 degrees
Thanku So Much for this wonderful video om engineering graphics 👍😊
You're life saver.. Thank you so much 👏👏👏😊😊
construct a diagonal scale to show metre decimeter and centimetre when 1 metre is represented by 2.5 cm and long enough to measure up to 6 m also find RF show a distance of 2.55 m, 3.34 m, 4.44 m
You're a life saver !!
construct a plain scale to show metre and decimeter when one metre is represented by 2.5 cm and long enough to measure up to 6 m also find rf show a distance of 3.5 metre
*How to make 90°+ angles by the help of Scale of chord ?*
Wow sir man gaye apko maza aa gaya ,jo doubt tha clear ho gaya thanku very much sir .....I also subscribe your channel.for important video..thanku sir apne hamre marks katne se bacha liye 👍👍👍....thanku sir.....
A very good instructional video! and also a super back to basics way of working out Angles for Roof Carpentry without any calculators or tables!
Sir what we have to do for angles greater than 90 ?
Thank you so much for this helpful video, Sir !
What I had thought of doing was this :
Divide the base line AD (D is the point where the 90° arc cuts AB when extended) into 9 parts and then taking each part (0-1, 0-2, ..., 0-9) as radius, draw an arc starting at AD(the line) and ending at AC(the arc) .
My logic was that when you look at the line below AD having perpendiculars dropped from all the arcs, all the rectangular parts seem to be equal, so it should work out in the opposite direction (starting with the rectangles and then moving onto the arcs) also.
I was thinking that this would also divide my quadrant ABCA into 9 equal parts, but it doesn't seem to work .
Why is this so ?
Rishika... You gave written a long message.....
Anyway I am sure that the method I explained is clear.......
I have got to watch the video again to understand what I had I explained.
And frankly speaking, even I have forgot the method.
@@ManasPatnaikofficial No Sir, you don't need to watch the video again, because my idea is different from what you taught .
In short, my idea was to divide AB into equal parts and then produce angles by taking those parts as radii, which didn't work .
But thank you so much !
I think what u say is also correct Rishika...only thing u need to careful about is finding point B which will be 6th point from point A ( which we come to know after seeing sirs final diagram). So in my opinion it can be done the way u said.
Sir ur classes are amazing, I dont even know about this ..but when i saw u r total videos i got a confidence, thank u so much sir
Tq sir for this interesting vidio.. ✨
Construct angle of 125 degrees by means of scale of chords
Can we divide the three parts of 30° by hit and trial method ?
It was very helpful
All the best.......
Subjectwise Playlist:
1. Engineering Drawing/Graphics (English): th-cam.com/video/WG6H2pISUzQ/w-d-xo.html
2. Engineering Drawing/Graphics (Hindi): th-cam.com/video/SB83cUaAiCM/w-d-xo.html
3. Engineering Mechanics / Applied Mechanics: th-cam.com/video/Z4WN2Z9okfs/w-d-xo.html
4. Mechanics of Solids / Strength of Materials / Mechanics of Materials: th-cam.com/video/Co4YlavCpeQ/w-d-xo.html
5. Theory of Machines: th-cam.com/video/Co4YlavCpeQ/w-d-xo.html
6. Machine Drawing: th-cam.com/video/iFCnFUR9Gdc/w-d-xo.html
7. Engineering Drawing for Engineering Services Prelims: th-cam.com/play/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU.html
8. Physics for Class 11: th-cam.com/video/0fejUC79LZY/w-d-xo.html
9. Manas Speaks Series: th-cam.com/play/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0.html
10. Channel 2 Link:
th-cam.com/channels/_aqx41HWeOebfL6FqBYU6Q.html
Good
Nice I like this
Can you draw let's 38degrees using that scale of chords
Very good sir
👌
Subjectwise Playlist:
1. Engineering Drawing/Graphics (English): th-cam.com/video/WG6H2pISUzQ/w-d-xo.html
2. Engineering Drawing/Graphics (Hindi): th-cam.com/video/SB83cUaAiCM/w-d-xo.html
3. Engineering Mechanics / Applied Mechanics: th-cam.com/video/Z4WN2Z9okfs/w-d-xo.html
4. Mechanics of Solids / Strength of Materials / Mechanics of Materials: th-cam.com/video/Co4YlavCpeQ/w-d-xo.html
5. Theory of Machines: th-cam.com/video/Co4YlavCpeQ/w-d-xo.html
6. Machine Drawing: th-cam.com/video/iFCnFUR9Gdc/w-d-xo.html
7. Engineering Drawing for Engineering Services Prelims: th-cam.com/play/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU.html
8. Physics for Class 11: th-cam.com/video/0fejUC79LZY/w-d-xo.html
9. Manas Speaks Series: th-cam.com/play/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0.html
10. Channel 2 Link:
th-cam.com/channels/_aqx41HWeOebfL6FqBYU6Q.html
How we measure more than 90 degrees
Subtract that angle by 180° and Mark that angle from opposite side of the last axis
Sir your engg. drawing video is very helpfull to us and those engineer who want to learn engg. drawing very clearly...
Sir, Which Software you use for engg. drawing???
Hi Tirthankar
I am sure that these videos are helping u learn...
Keep watching and do let your friends know about this channel so that they can also benefit.......
And i make videos on powerpoint and autocad simultaneously....
thank u sir...
Thanks sir . We also need comparative scale
1. Engineering Drawing (English) :
th-cam.com/play/PLIhUrsYr8yHwDUrVYmUNYkEeZgZTvoIfS.html
2. Engineering Drawing (Hindi) :
th-cam.com/play/PLIhUrsYr8yHx0C3ebAW-FQxTP8ig8-QxU.html
3. Engineering Mechanics:
th-cam.com/play/PLIhUrsYr8yHxfOmcGIeUThHEr9lQ3IXRS.html
4. Mechanics of Solids:
th-cam.com/play/PLIhUrsYr8yHzft7ygw5THZo4aDcsxEadP.html
5. Theory of Machines:
th-cam.com/play/PLIhUrsYr8yHx0aFXSQvT7nm6ivJSMKnAU.html
6. Machine Drawing:
th-cam.com/play/PLIhUrsYr8yHzwT06rv7u3tqdfmmKOCz1w.html
7. Engineering Services Examination_Engineering Drawing_Prelims:
th-cam.com/play/PLIhUrsYr8yHwFTNav_k3EEIvztQEQHilU.html
8. Physics for Class 11:
th-cam.com/play/PLknJ2c9H1euEwtFJLUGZvkjG35OoVvemM.html
9. Manas Speaks Series:
th-cam.com/play/PLIhUrsYr8yHz9g5V7Lw_BA5UXbAbgVyf0.html
10. Physics Channel Link:
th-cam.com/channels/_aqx41HWeOebfL6FqBYU6Q.html
Super bro.... Got some good knowledge from this video
Thanks have learned a lot
How to measure the angles of a triangle using this scale?
Thank you
All the very best and do share it with your friends
how do we find an angle more than 90 degrees?
Sir plz explain making triangle using scale of chords
It was a wow! Thanks
give example how we measure angle with the help of scale of chords
Can you give more problems...on this topic
If I want to measure 145 deg then how we can measure
How to measure 130
At last sir please us tell that which line we have to show darker
All lines make it Thin and Dark..........
Can anyone tell how much number we usually get in engineering drawing and graphics I am in 1st semester
How to calculate 47 degrees
construct a scale of chord to show 70 and 145
There is no video of vernier scale
Tomorrow my exam now i co pleted 1 chapter perfectly still 2 chapters r left out😎😎
Still same condition is here.... 😂
Sir I need how to measure an angle of 47deg
sir could you please make avideo on easy techniques to draw isometric drawings
Sanketh? xD
Sir,do we need to draw the raw diagram in the main diagram while trisecting the arc as you have shown in the right side in large.And the 2nd qs is if there is given to measure a particular angle,then all the times do we need to draw the scale of chords?
Sir this video was really effective.Can you please upload video for drawing circular vernier scale also?
another method is to simply divide the AB line into 9 parts (the same way it is done in plain scale). And then cutting arcs equal to the length of the subdivisions (that we get on the line AB) onto the AC arc . And boom we fet the least count as 10 degrees. Way simpler.
sir apke video download kyo nhi ho rhe h
Dear kindly show how to measure angles above 90 😍😍
Thanks sir, I enjoyed your class.
Great help for me about engineer drawing scale of chords.
Hi Albinus.........
Thanks for appreciating my work and do spread a word about this channel among your friends and classmates so that they can also benefit.
I need a 47 degree measurement
Thank you soo much,
Me and my friends were just waiting for this video.
sir atlast the video there is the 2 figures, so we need draw 2 figures???
Wow
Thank U sir
Thanks
Please upload with examples
Thank You Sir..
Awesome stuff sir 😍
i got it today thanks
Sir isme ye 3 part kiye smz nhi aaya
sir i want to learn CADCAM
can u say some hints to learn the process
Sir make a video on vernier scales pls.... this video was very helpful...
ya sure...
Thank you sir you are the saviour
upload some problems related to this topic as measuring the angle of a triangle .
Sir please thodi Hindi bhi use kijiye aapke video bahut hi helpful h lekin language samajh me nhi aati h
Sachin iss channel pe English me hi videos aaenge.....
Mere hindi channel pe bhi videos dekh sakte ho...
Okk sir
I really understand this topic but I had a little bit confusion
Can we draw an angle greater than 180 by scales of chord?
tqsm
F*kng kidding me 🙄 I'm looking for guitar chords 🙄🙄
Sir please upload the video about the projection of hexagonal plane inclined to both planes HP and VP. It may inclined at 70 degree
Sir plz plz plz plz plz it's my humble request to you to give my three questions construction
sir make a video on vernier scale plssss sir
Hindi mein hi leleta
Sir can you teach in hindi
Ur understanding style is very good but if u will start in hindi only a little between the question which is not understable for some guys
Thank you soo much,
Me and my friends were just waiting for this video.
It was very helpful
Thanks
Thanks
Thanks