thank goodness for these videos. This is the most useless device ever, wish we'd kept the old manual device. It comes on when it feels like it and never when you want it to,
Press 1) the menu (circle icon) twice. 2) press down arrow till CONTOL appears. 3) press ✅ till TPI APPEARS. 4)press down arrow twice till OPTIMIZE appears. 5) Press ✅ 6) Press down arrow to get to off then press ✅. I think 🤔 that is most of the steps to turn off optimise. Note: optimise turns boiler on earlier than prog start time per how low room temp drops at night. So set to come at 7am to achieve 20c, but room temp is 14c; the boiler might start at 3am to provide 20c by 7am. It’s flawed logic so best turn optimise off. Only works in lab conditions; not in draughty UK Victorian houses 🏘.
Thank you for this!! We've just had a new boiler installed and this is my new thermostat. I can't figure out how to turn the heating off so the house is always really warm. Living in a Victorian house this is really helpful 🙂🙂
Assuming you have programmed it correctly, if it is coming on earlier than programmed then this could be down to the optimum start function. Try going into the settings and turn this feature off. Manufacturers are having to provide these features to comply with government regulations (enviromental targets etc.), but the goverment never consult with the trade before proceeding. Optimum Start has caused me more grief over the years than anything " why is my boiler coming on in the middle of the night" etc. If they consulted the professionals then we would all tell them if they want to meet enviromental targets they should look at building insulation first. The UK has the worst building heat loss figures anywhere in Europe! Rant over!
@@tarquinbiscuit-barrel5871 Thank you for your interest and help. I have it working correctly at the moment. Just wish I knew how! I believe you were the MP for Luton but I actually voted for Kevin Phillips Bong.
Press 1) the menu (circle icon) twice. 2) press down arrow till CONTOL appears. 3) press ✅ till TPI APPEARS. 4)press down arrow twice till OPTIMIZE appears. 5) Press ✅ 6) Press down arrow to get to off then press ✅. I think 🤔 that is most of the steps to turn off optimise. Note: optimise turns boiler on earlier than prog start time per how low room temp drops at night. So set to come at 7am to achieve 20c, but room temp is 14c; the boiler might start at 3am to provide 20c by 7am. It’s flawed logic so best turn optimise off. Only works in lab conditions; not in draughty UK Victorian houses 🏘.
How do we schedule water and heating individually? I’d like my water to be on all the time but want to schedule the heating? Schedule does not give option to select water/heating.
Hey, when I set a schedule how do I know how long it will be in for? I want it to be on at 6am - 7am and then 7pm to 8pm. Is there a way to achieve this please? At the moment I have to set all the 6 programmes. Also I set 6am for one but can’t tell it when to turn it off again? What gives? Any help please.
Hello, I only have such a thermostat, for about two weeks now I have had an icon with a key and a screwdriver on the right side. And I'm told to call a phone number just because that number doesn't ring how can I get rid of that icon ??? Because I have problems using the thermostat, such as temperature control and other menu functions. Thanks.
Optimised is off. Comes on in the middle of the night, remote control does nothing, blows out heat full power 24/7. The only way to stop it is to go to the boiler and turn it all off!
Just a simple question? At the Wall box where you can switch Auto or Manual, if I switch it to Manual, does that mean I dont have to use this thermostat box at all and can just control everything from the dial on the front of the boiler itself?
Hey , I just moved in a new house and I have the same problem, I need the heater on more constantly but I don't know how to do it. Did you fine out ? Thank you
Exactly! Mine is set just like thst, yet coming ion all hours. Been on hold trying to get to technical support for over 20 minutes. No answer. Useless thermostat. Useless timer and, it seems, a pointless customer service. It's got my mum, who is a pensioner and I'm not happy.
I have an old thermostat what was only connected to the boiler through 2 wires, that's it. Now I got this shit Salus RT520RF that require those 2 wires plus another 2 and a 220 socket to plug it in. That should be on the package, on the site, on the product description, before people purchase this. I don't have an extra socket to plug this in, as my old wireless one worked wired to the boiler
40k + views in just over a year suggests a lot of people are struggling with this. I also have the coming on in middle of night problem...
Yes me too
thank goodness for these videos. This is the most useless device ever, wish we'd kept the old manual device. It comes on when it feels like it and never when you want it to,
Good clear video without any unnecessary frills. Indirectly helped me sort out confusion I had with my RT520RF. Thank you!
Press 1) the menu (circle icon) twice. 2) press down arrow till CONTOL appears. 3) press ✅ till TPI APPEARS. 4)press down arrow twice till OPTIMIZE appears. 5) Press ✅ 6) Press down arrow to get to off then press ✅. I think 🤔 that is most of the steps to turn off optimise.
Note: optimise turns boiler on earlier than prog start time per how low room temp drops at night.
So set to come at 7am to achieve 20c, but room temp is 14c; the boiler might start at 3am to provide 20c by 7am.
It’s flawed logic so best turn optimise off. Only works in lab conditions; not in draughty UK Victorian houses 🏘.
Thank you for this!! We've just had a new boiler installed and this is my new thermostat. I can't figure out how to turn the heating off so the house is always really warm. Living in a Victorian house this is really helpful 🙂🙂
Thanks for this info, I wondered why I could hear boiler in the early hours
Great video, however, there is no indication how to get into the TPI menu AFTER the initial setup. Is there one?
New to this. My goodness whoever designed this hasn’t a clue as to how those without degrees in computing will manage!
Agreed with the comments here, out of the blue decides to do what it wants. Comes on in the middle of the night sometimes even when set not to.
Assuming you have programmed it correctly, if it is coming on earlier than programmed then this could be down to the optimum start function. Try going into the settings and turn this feature off. Manufacturers are having to provide these features to comply with government regulations (enviromental targets etc.), but the goverment never consult with the trade before proceeding. Optimum Start has caused me more grief over the years than anything " why is my boiler coming on in the middle of the night" etc. If they consulted the professionals then we would all tell them if they want to meet enviromental targets they should look at building insulation first. The UK has the worst building heat loss figures anywhere in Europe! Rant over!
@@tarquinbiscuit-barrel5871 Thank you for your interest and help. I have it working correctly at the moment. Just wish I knew how! I believe you were the MP for Luton but I actually voted for Kevin Phillips Bong.
Press 1) the menu (circle icon) twice. 2) press down arrow till CONTOL appears. 3) press ✅ till TPI APPEARS. 4)press down arrow twice till OPTIMIZE appears. 5) Press ✅ 6) Press down arrow to get to off then press ✅. I think 🤔 that is most of the steps to turn off optimise.
Note: optimise turns boiler on earlier than prog start time per how low room temp drops at night.
So set to come at 7am to achieve 20c, but room temp is 14c; the boiler might start at 3am to provide 20c by 7am.
It’s flawed logic so best turn optimise off. Only works in lab conditions; not in draughty UK Victorian houses 🏘.
How do I turn down the heating!
Seems nicely made
How do we schedule water and heating individually? I’d like my water to be on all the time but want to schedule the heating? Schedule does not give option to select water/heating.
Hey, when I set a schedule how do I know how long it will be in for?
I want it to be on at 6am - 7am and then 7pm to 8pm. Is there a way to achieve this please? At the moment I have to set all the 6 programmes.
Also I set 6am for one but can’t tell it when to turn it off again? What gives?
Any help please.
The programs keeps coming on is there a way to cancel all programs?
Great tutorial,thank you
Hello, I only have such a thermostat, for about two weeks now I have had an icon with a key and a screwdriver on the right side. And I'm told to call a phone number just because that number doesn't ring how can I get rid of that icon ??? Because I have problems using the thermostat, such as temperature control and other menu functions. Thanks.
Est ce que le thermostat est adapté avec les chaudières à granules car je n arrive pas à démarrer la chaudière avec le thermostat pourquoi
Optimised is off. Comes on in the middle of the night, remote control does nothing, blows out heat full power 24/7. The only way to stop it is to go to the boiler and turn it all off!
Just a simple question?
At the Wall box where you can switch Auto or Manual, if I switch it to Manual, does that mean I dont have to use this thermostat box at all and can just control everything from the dial on the front of the boiler itself?
Hello, if you set the receiver to manual you simply close the contact permantly, and yes this means you can use the dial on your boiler itself
I have Same problem how do I turn optimum of when I’ve set it up
How to override and put central heating constantly?
Hey , I just moved in a new house and I have the same problem, I need the heater on more constantly but I don't know how to do it. Did you fine out ? Thank you
Press tick to confirm.
Same issue for me also its not working properly very difficult to setup
What button do you press to confirm?
now, can you explain why is not working after doing all that?
Exactly! Mine is set just like thst, yet coming ion all hours. Been on hold trying to get to technical support for over 20 minutes. No answer. Useless thermostat. Useless timer and, it seems, a pointless customer service. It's got my mum, who is a pensioner and I'm not happy.
@@creativequeen8371 Are you in automatic or manual mode? There's a hand icon if in manual mode which means it just stays on at the temperature set.
@@pboyall Only if it works!!
Hi Folks, I thought I had cured it. But it has defeated me. Won’t follow the timed schedule. Going to change it.
Can any one help iv got a salus rt520tx and it's showing lostlink
Did you find a solution?
Thermostat is on, shows temperature, time, et. but non of the buttons are working to reset it. Can someone help please
Мне показывает, что сервисный режим включен, как можно отключить?
Shows me the wrong temperature for the whole day
Imagine designing this and thinking it was useful/clear.
I have an old thermostat what was only connected to the boiler through 2 wires, that's it. Now I got this shit Salus RT520RF that require those 2 wires plus another 2 and a 220 socket to plug it in. That should be on the package, on the site, on the product description, before people purchase this. I don't have an extra socket to plug this in, as my old wireless one worked wired to the boiler
.iv never been so confused 😢
Useless thermostat, my landlord have re program several times and yet still having the same problem
Just wanna turn it up 😂😂😂😂
What a piece of crap! Can't figure out how to change the time after set up. No instructions anywhere, not in the PDF, Manual or online. WTF?
En francais