Hey @davidvanvoris I just picked up a TH400 out of a 79 camera im going to rebuild for my 5.4 DOHC swap on my 96 Cobra. I was very worried about this after some said it won't be steerable at all. After seeing this it made me much more comfortable.
Do you run a 2 step with your car? If so how do you have the switch set up? I’m going to be running a similar th400 setup as you are but just curious how the 2 step would work. Thanks!
Awesome, video of my brother. I’m switching over to a TH 400 also. I’m going to do some real racing with my car. I got over 1000 rear wheel horsepower. What do you think the car will do on the highway. What kind of speed will I hit, and what gear do you think I would be in at 40 or 50 miles an hour to start a roll race
David Van Voris Great Video I think you did a Great job grinding part of the Tang Stangs Hood to Protect that Beautiful Titanium Exhaust Tip and I hope Joe can fix that Horrible Scratch
From experience they almost never wokr just because of the simplicity of the 3 speed trans...most people just use aftermarket dashboard tachs and speedometers
David love your car bud. Thanks for letting us follow your journey, its been a sweet ride :) Can't wait for the races to start rolling in. I have a question, when will you put your car on the dyno so we can see what the power your running at the wheels.
tommy lee I’d guess after everything it’s probably about 4000 lbs, thag might be a little high but with it running in the 8’s thag puts it around 1100 don’t quote me tho
Watch 2nd gear bro or get the pro mod drum 36 element. If you downshift from 3rd to 2nd and aren't accelerating, you will waste sprag. I am installing pro mod drum and 36 element sprag to bulletproof my full manual th400.
I watched the video when you installed the fuel system, and you set the pumps about the same length I did mine. I’ve ran my car all the way down to 10 miles to E trying to find an e85 station. I’m sure you did, but did you install the line that connects to the passenger side tank correctly? If not, you’re car would run out at the half tank level like it’s doing.
David Van Voris I would definitely check on that because I have the same fuel system you do from lethal performance for my ‘18 and I set my pumps right at the same length as I saw yours set to awhile ago. Good luck man!
How did you get the speedo working after the th400 swap? I just did the JPC system on a 2012 Coyote and I’m scratching my head on how to pick up a speed sensor signal.
A lot going on in their but its pretty damn cool haha. I have a rivnut tool but I don't have enough rivnuts. That would be ideal to eliminate the nuts all together for your glory hole.
Dave 2 months ago : “it’s fucking hot in here I wished I still had AC”
Dave winter time : “I’m glad I got rid of AC I never used it anyhow”
🤣
Hahaha facts!
🤣🤣🤣🤣
Hey @davidvanvoris I just picked up a TH400 out of a 79 camera im going to rebuild for my 5.4 DOHC swap on my 96 Cobra. I was very worried about this after some said it won't be steerable at all. After seeing this it made me much more comfortable.
I drive mine
How much was your turbo setup I realy love it I want to do this
Definitely need to get your tuner to fix that because doesn't matter if it's cold or hot outside mine starts perfectly fine on e85
Do you run a 2 step with your car? If so how do you have the switch set up? I’m going to be running a similar th400 setup as you are but just curious how the 2 step would work. Thanks!
Th400 is badass. What read gears you have. I have th400 in my 68 mustang street strip car all motor pump gas.
3.15 I’ll probably change soon
@@DavidVanVoris Why such high gears and not 373's or 410's.
Awesome, video of my brother. I’m switching over to a TH 400 also. I’m going to do some real racing with my car. I got over 1000 rear wheel horsepower. What do you think the car will do on the highway. What kind of speed will I hit, and what gear do you think I would be in at 40 or 50 miles an hour to start a roll race
The gauge to the left of the boost gauge you referred to a the “n” gauge. What is that specifically
It can view anything from the car via obd ii and is what tunes and data logs the car
Could I please get some more info as I might want to get one. Thanks again
Ron McBee you can purchase them through Lund racing and get a tune from them
David Van Voris Great Video I think you did a Great job grinding part of the Tang Stangs Hood to Protect that Beautiful Titanium Exhaust Tip and I hope Joe can fix that Horrible Scratch
Hellcat Dreamin Josh thanks man
How did you get the speedometer to work?
From experience they almost never wokr just because of the simplicity of the 3 speed trans...most people just use aftermarket dashboard tachs and speedometers
That cranking issue is in the tune. That can be way better.
David does the Speedometer work with the TH400 swap ??
Most of the time no...most people just use aftermarket ones both speed and rpm
Do you have to get off the gas when up shifting and downshifting?
TurboCamaroSS 5.3 no
Where did you get the TH400 from? What converter did you get for it and how much horsepower does the mustang have?
We sell our own kit now coyote-direct.myshopify.com/collections/transmission
@@DavidVanVoris do you guys do LEO discounts?
My guy making plays more than the Raiders 😂😂
Can’t wait for that “Moon Tune”
💀💀💀😂
Why not do cherry max rivets instead of the screws? Just a thought
Borderbully 619 that’s what they come with but I’ll look into that thanks!
Whats your roll when your roll racing?
How did you get Speedometer to work with th400
Car is doing work with a stock bottom end! 🔥🔥🔥🔥
Thanks! We will see how it lasts lol
I love it my boy David keep up the work and love video 💯💯💯💯👍
Dominic Kirkwood thanks man
David love your car bud.
Thanks for letting us follow your journey, its been a sweet ride :)
Can't wait for the races to start rolling in.
I have a question, when will you put your car on the dyno so we can see what the power your running at the wheels.
Thanks man! I don’t know if we will get a chance to and I pretty much know what it makes based off of trap speed and weight
Can you please share what you think it is at the wheels bud? Please lol
tommy lee I’d guess after everything it’s probably about 4000 lbs, thag might be a little high but with it running in the 8’s thag puts it around 1100 don’t quote me tho
Watch 2nd gear bro or get the pro mod drum 36 element. If you downshift from 3rd to 2nd and aren't accelerating, you will waste sprag. I am installing pro mod drum and 36 element sprag to bulletproof my full manual th400.
I’ve heard that but I’ve never had problems. This is a pro mod drum
@@DavidVanVoris So you have had no issues downshifting 3rd to 2nd with pro mod drum. I was told they are bulletproof. Getting one now
maximus vonce no I mean I don’t recommend it but I’ve done it. I don’t use it to brake
How much do you think it weights
38
I watched the video when you installed the fuel system, and you set the pumps about the same length I did mine. I’ve ran my car all the way down to 10 miles to E trying to find an e85 station. I’m sure you did, but did you install the line that connects to the passenger side tank correctly? If not, you’re car would run out at the half tank level like it’s doing.
Yeah it’s only under wot if it’s under half closer to 1/4 it goes lean. I’ll have to check
David Van Voris I would definitely check on that because I have the same fuel system you do from lethal performance for my ‘18 and I set my pumps right at the same length as I saw yours set to awhile ago. Good luck man!
Hey what you make at wheel. Like 1k wheel
Does the JPC kit come with everything you have installed on your car (minus the transbrake)?
El Coyote yes check out their website
Comes with everything you need and driveshaft
How did you get the speedo working after the th400 swap? I just did the JPC system on a 2012 Coyote and I’m scratching my head on how to pick up a speed sensor signal.
Bob Forthun on s550s we don’t have to do anything it’s a wheel speed sensor
Lucky you. Appreciate your getting back to me. Thanks.
Bob Forthun I believe JPC has a reluctor wheelie this
Did you get Speedometer to work on 2012 mustang. How did you Do it?
I don’t really like fords but this mustang is bad ass my dude! Keep ripping her🤟🏼
Moxt3cito Kiiid:. Thanks
Hey on your clutch input. Did it go to the PCM or BCM? What pin if you remember? thanks in advacne
I didn’t I ran mine to my trans brake. Email n2mb they will tell you
Thanks for the quick reply,, I am referring to the paddle shift input for the clutch pressed.
Twin Turbo Mustang it’s done via hp tuners from Lund
Awesome thanks
so the TH400 only has 3 gears?
Yes
What rpm did you set up your 2step on ?
Good luck at Ennis this Friday! Should be a good amount of testing with the new setups
Nado thank you!
Still wish you had a digital dash tho
Omg ❤️
What shifter is that?
Hurst
Is it a manual valve body th400?
Reverse manual valve body
Brand new to the channel! Who was your car built by ? Just a curious question lol
Me lol
Man I'm just itching to see you getting on it but I understand its cold and tires won't hook....
Nick Pendleton haha yeah I wouldn’t be commenting lol
New intro is dope 🤘shoulda exited out the bumper 😎
Thanks man!
Looks like you have it set up nice 👍
Great video buddy 👍
Thanks man
Good evening
A lot going on in their but its pretty damn cool haha.
I have a rivnut tool but I don't have enough rivnuts. That would be ideal to eliminate the nuts all together for your glory hole.
Now put a gear vendors overdrive on the th400 and you'll love it even more.👍
Brian Samuels that’s what I’ve heard!
@@DavidVanVoris it will make your car faster on top end.
Gear vendors overdrive adds 100lbs bro
@@maximusvonce1381 nope! I weighed mines before I installed it
@@musclebone7875 Yea but it costs like $3k just for an overdrive gear.
When you putting a cage in it
This winter
What happened to this guy. Did he sell his cars.
S/O to the 2013 red charger for the ugliest decal in 2019 @ 14:12
Daezon Mitchell lmfao!
I hate these transmissions they make the car sound like a boat in 1 gear the whole time even when you shift it sounds like the same gear hideous
Never realized you’re in MN, I’m out in grand forks ND
Hahaha no Amarillo
David Van Voris damn why do I feel like I’ve said this before after seeing the MN plate 😂
Mkiv Roberts hah yeah that’s where Kevin bought his viper
It's 30 degrees out. So what
DABBIT BEAVIS true
2:14 Dave the dentist
Sean Michael Hahahaha
Not what I clicked on to see
No abs! Not a street car lol😆
Fake news
But wait there’s more on the next one 👍🏾
👀😍🤤
Joshua Duncan 💪🏻
1st???
Yes sir!