I bought this printer about 2 months ago , to print school work for my young child , I paid $22 for it at Walmart , now they want $49.95 just for a black ink cartridge , geez I almost threw it out , thanks for the vid amigo .
Thankyou so much for the video. Been wasting $16 for 1 blk ink cartridge at Walmart say every 3 weeks (i sell online/print alot of shipping labels). After almost half a yr of buying ink.. Just now realized i can buy refills on amazon!! Your short tutorial helped tons.
This is great. $22 kit from Amazon and the printer is working again. These cartrages are very expensive now. $100 for the set of genuine Cannon. 1000 thanks👍
thank you! how much do you drill? just enough to break the top plastic, or more? i did just enough to break the top plastic & i think the syringe touches the sponge right below that. but i think i maybe did something wrong because even if i fill a tiny bit, it overflows... any advice? thanks again for the clear video!
Thank you for this tutorial video. I purchased my printer 2 years ago and when the ink ran out i could not believe how much the new ink cartridge cost. My printer just sat here untouched until i looked at this video.
Thanks cause I don't have a drill or small nails and that other tool this guy is showing lol for now I'll go buy a black cartridge today. I don't have time to do all this today lol
with a new cartridge how much ink are you able to use before you start refilling, last one went to low and lasted a few refills then showed empty... Thanks
I even tried disconnecting the power cord and letting it reset. But the loic light stays on. Prints fine though. Guess I can live with a low ink light. It's worth it.
Great information you shared. Can you suggest a refill kit and a bottle of ink? I don't know anything about this yet but it's where I'm going for home schooling.
So all you do is type the color names & the printer will print them in those specific colors? I'm new @ this. So bare with me. Let me know ASAP. Thanks😊
you skipped over the last part. does the cover just pop back on, without leaks, etc.?! how long to let it sit there before cover goes back on?? also, what if you don't have a drill? then pop the cover off the black one too, or??!!
Very educational video. However, you should finish the entire process how to refill the ink before test it. Remember not all are technicians many want to learn. Thanks for sharing.
Great Video. However, when I first bought this printer, the black ink ran out and kept refilling it back up and worked just fine. Now, the color cartridge went low and filled it up but still the printer is not reading it and still showing the INK HAS RUN OUT MESSAGE. please help
Color drill 1mm hole in cartridge's middle RH (yellow) side and cartridge's LH (blue) side and cartridge's top RH (red) side and tape. Black drill 1mm hole on cartridge's LH side. These cartridges' are great low cost buy!!! I would drill the 1mm hole before new install and fill or top off right away.
i may buy the Canon Pixma MG3620 Wireless Inkjet All-In-One Printer would I need a certain type of ink bottles? man that's all they put in the cartridges ? man these scum bags look there's like a drop in there didn't even soak the entire sponge LoL wow well glad you made this video
I have a Canon TS3122 and when I fill the cartridge, the printer won't print because it's reporting the ink is empty. Can't get around the error. The only choice is to cancel printing.
I’m pretty sure printer companies don’t want you to refill them just so you can keep buying more cartridges. It’s wasteful but more money from us to them. But if we can save money and not waste that’s good
Thank you Chris, you saved me so much $$$$$.
It cost so much to replace these cartridges it's crazy
I bought this printer about 2 months ago , to print school work for my young child , I paid $22 for it at Walmart , now they want $49.95 just for a black ink cartridge , geez I almost threw it out , thanks for the vid amigo .
$22? I use the exact same ink cartridge and here is $16 for 1. Yours is def more expensive.
@@anilavanilla i think hw said the printer was $22 and ink was $50
Its cheaper to buy the printer again lol
Same my mom did the same too
Thank you so much. I love how detailed you are. Great help!
Thank you so much! Your instructions were very clear! You helped me save so much money which us essential when running a small business! ☺️
Thank you! This tutorial was perfect and fully taught me how to do this myself.
Thankyou so much for the video. Been wasting $16 for 1 blk ink cartridge at Walmart say every 3 weeks (i sell online/print alot of shipping labels). After almost half a yr of buying ink.. Just now realized i can buy refills on amazon!! Your short tutorial helped tons.
I don't know how much you sell, but I purchased a thermal printer (no ink) on Amazon for $100 - It's a game changer!!!! So worth it!
This is great. $22 kit from Amazon and the printer is working again. These cartrages are very expensive now. $100 for the set of genuine Cannon.
1000 thanks👍
Many thanks, Chris. I was about to take the printer back to Walmart but ... I will save the trip thanks to your detailed instructions.
Where did you get the ink refill kit?
Thanks alot Chris! You’re the man!
Thank you, doing a great job explaining.
I just tried your method. It didn't work till I tried the vacuum trick. Works now, thumbs up job
What exactly vacuum trick? My black ink still show Low Black Ink after i refill it. Thanks
Perfect Instructions. Thanks!
Thank you sir, this was a major help
6 ml black ink for cartridge cl-243, 2 ml each color for cl-244
Great video thank you!
Thanks so much!!! Very useful & it was a success for me :D
thank you! how much do you drill? just enough to break the top plastic, or more? i did just enough to break the top plastic & i think the syringe touches the sponge right below that. but i think i maybe did something wrong because even if i fill a tiny bit, it overflows... any advice? thanks again for the clear video!
Thank you for making this so easy...
Looks great man giving this a shot now.
Thx so so much for this I can save so much money God bless u for showing this hun
Thanks a million. I really appreciate knowing how to do this. It's a major money saver
Thank you for the info. Much appreciated video 👍
thank you chris the instructions were great on my first time thank you
Thanks! This will save me so much money.
IT WORKS!!! thanks a million you've saved me sooo much money.
Thank you. It worked very well.
Very good! Thank you for sharing!
Great explanation 👍👏🙏
Thank you, brother! Forgot I had some black ink in the basement. Got my printer back up in no time.
Very helpful! 👍🏼
Thanks
Thank you for this tutorial video. I purchased my printer 2 years ago and when the ink ran out i could not believe how much the new ink cartridge cost. My printer just sat here untouched until i looked at this video.
Holy smokes, you have just saved me a ton. Thank you !
Thnk you so very much for blessing us with your wisdom.
I couldn’t find my drill bits so I used a small hammer and a thin nail to poke the hole. Thanks so much!
Only thing is you risk damaging oposite side of case.
Thanks cause I don't have a drill or small nails and that other tool this guy is showing lol for now I'll go buy a black cartridge today. I don't have time to do all this today lol
ty ty ty ty you are a legend
How many total ml of ink did you put in the cartridge
Thank you! Where you bought the ink? and what brand?
Hello Could you please inform me of where you purchased the bottles of ink?
with a new cartridge how much ink are you able to use before you start refilling, last one went to low and lasted a few refills then showed empty... Thanks
One more question, Do all printers use the same ink? (not ink cartage)
well done. where i can buy the kit
Great video, I did it and it works, but how do you stop the printer from saying low ink levels?
I think you press and hold “stop” until it clears
No. That doesnt work. The light stays on
Right I did this but it not working
I even tried disconnecting the power cord and letting it reset. But the loic light stays on. Prints fine though. Guess I can live with a low ink light. It's worth it.
does anyone know how to reset the ink level in these carts after use
Great information you shared. Can you suggest a refill kit and a bottle of ink?
I don't know anything about this yet but it's where I'm going for home schooling.
Did you ever find a good kit?
I have cannon pixma t5150, is there any ink refill brand that is better than original one?
printer still shows its out of black ink do we need to reset in some way? Are these not DRM at all?
How about the hole you used to put the ink leave it open is that ok ???)
Very good video saving me $$$$$$ thanks
Hi Chris,
How many ml of bank ink to refill in canon 243 cartridge
Best ink to use!?
So all you do is type the color names & the printer will print them in those specific colors? I'm new @ this. So bare with me. Let me know ASAP. Thanks😊
Great video
Thank you so so much for this video.
It really helped me alooot
How does this ink hold up to fading? I sell high quality art prints on expensive paper and would hate for one to fade on a customer.
Hi
Can u advise the good ink and it's supplier
Pls
may i ask where do i get the syringe ? thank you....should save alot of money !!!
Thank you for this video this will save me lots
Can you tell me the name of Ink or share the link for buying? My printer is Canon and 243 & 244 I use.
Thanks. However the chip is not reset, how does one do that?
Where can I purchase that same type and size of syringe?
you skipped over the last part. does the cover just pop back on, without leaks, etc.?! how long to let it sit there before cover goes back on?? also, what if you don't have a drill? then pop the cover off the black one too, or??!!
Very educational video. However, you should finish the entire process how to refill the ink before test it.
Remember not all are technicians many want to learn. Thanks for sharing.
Can the black ink cartridge be filled and used on the printer without refilling the color cartridge?? Will the printer still function?
How did you get the ink top off of the color ink cartridge?
He gently pried up the small clips on the sides of the cartridge.
Why didnt you show the filling to the orange or blue?
Best video yet! Thanks, this really helped!!! Much appreciated:)
Where can I purchase that same type of syringe?
What to do for black ink volume unknown error
thank you
Great Video. However, when I first bought this printer, the black ink ran out and kept refilling it back up and worked just fine. Now, the color cartridge went low and filled it up but still the printer is not reading it and still showing the INK HAS RUN OUT MESSAGE.
please help
I filled it up and now I'm getting the error 5200, hardware. Is it possible if was too dry or something? It was fine before, just no ink to print.
Thank you 🙏🙏🙏
Oops! Many thanks also to your fans who ask the right questions and get kind responses which complete this class! I love you all!
My color is is coming out blurry and not colored right ? What do I do ???
Thank you! I just got the TS3322 and I know I will need this, do you know what's the best place to get the ink from?
Amazon
HEMAINK 5 Bottles Ink and Ink Refill Tools Compatible for Canon Ink Cartridges PG-245XL CL-246XL PG-210XL CL-211XL PG-243 CL-244 245XL 246XL 243 244 210 211
HEMAINK 5 Bottles Ink and Ink Refill Tools Compatible for Canon Ink Cartridges PG-245XL CL-246XL PG-210XL CL-211XL PG-243 CL-244 245XL 246XL 243 244 210 211
I did it and now the lightening bolt yellow light is on
I did this but it's still showing my black ink cartrige low. I filled it all the way up.
How to Chris youre saving me a lot of money ,keep making videos
Nice to share this video,How to rifle ink canon printer 🖨️ thanks bro 🙏.
How do you make the printer acknowledge that the ink was refilled? Mine keeps saying Unknown...
How do you make it stop saying that there's an error now it doesn't recognize cartridge After I filled it up
what do i do if my printer is saying that the cartridge is low after i fill it?
same happens to me
@@ladymojorisin3157 press and hold stop for 10 seconds when it says that then tell it to realign printer heads twice then your good to go
I tried that it didn’t work. My TS200 light keeps flashing which indicates ink ran out although I have refilled my cartridge.
mine is not recognizing my ink cartridge after refilling
What do you do if you've filled it and your printer won't let you use it because it claims it's empty?
hold stop button till it goes away
were can i buy the syringe from?
You can order them from Amazon. Search for : Ink Filling Syringe with Platic Blunt Needle Tip.
Hopefully it helps. God bless you
I drilled a small hole in the black ink cartridge and filled it with 5ml of black ink. But the yellow light is still on saying low ink. Now what?
wish u would have shown us how to reseal color ink???
Not sure what I did wrong. I did black and color and my test page came out completely blank :(
Color drill 1mm hole in cartridge's middle RH (yellow) side and cartridge's LH (blue) side and cartridge's top RH (red) side and tape.
Black drill 1mm hole on cartridge's LH side.
These cartridges' are great low cost buy!!!
I would drill the 1mm hole before new install and fill or top off right away.
thanksssssss
Where did you buy the ink?
amazon its called jetsir, at least hte one he has
where did you purchase the ink from?
You can get this ink set from Amazon for around $14.95
i bought the black bch ink from walmart.com for $7.98 100 mL
and it only took about 7mL to fill
i may buy the Canon Pixma MG3620 Wireless Inkjet All-In-One Printer would I need a certain type of ink bottles? man that's all they put in the cartridges ? man these scum bags look there's like a drop in there didn't even soak the entire sponge LoL wow well glad you made this video
mine keeps turning the ink green
Hi!! Help! I refilled all the colors but my printer doesn’t print the red! And the other colors faded
I have a Canon TS3122 and when I fill the cartridge, the printer won't print because it's reporting the ink is empty. Can't get around the error. The only choice is to cancel printing.
Are these cartridges not meant to be refilled? Why can’t I just squeeze ink into it?
I’m pretty sure printer companies don’t want you to refill them just so you can keep buying more cartridges. It’s wasteful but more money from us to them. But if we can save money and not waste that’s good
A BIG Thanks to you for saving me BIGGGGGGGGGGGGGG $$$$$$$$$$$$$$$$$
I just used a cigarette lighter to heat up a small phillips screwdriver 3 or 4 times, and poked it into the plastic until it broke through. Bingo!
I thought about that too
Refilled the cartridges and now printer doesn't recognize them. Won't print. Now what?
I just used what it came with... threw printer in trash just bought a new one