The turn signal/hazards lights did not work after install, it kept blowing my 15 amp fuse in the fuse box. Solution: I unplugged the turn signal adapter and plugged the Morimoto connector directly into the factory turn signal connector. Other than that, love the lights.
Is there a video on the turn signal adapter? I have to depin/repin the adapter to allow my turn signals and hazards to work for my 2014, but I can't seem to get the pins removed with any tools. Probably something easy, just not sure why it won't release and I don't want to break it. Thanks.
Unfortunately we do not have a video for that, but any thin metal object should pop those pins out. They're designed to be re-pinned, so you shouldn't have to worry about damaging anything!
Great vid! QQ - just purchased a used 15 Tundra and noticed that the truck came with some Morimoto headlights. I noticed that the passenger side turn signal sequential only goes halfway. Wondering if you happen to know if that’s due potentially a bad resistor ?
I have a 2018 tundra and when using the signal adapter, it blows the hazard fuses. When connecting it without everything works. Also noticed that the DRL doesn’t work either. OEM headlights are led and has DRL. Any suggestion on why this is happening? Thanks!
AUXLIGHT Car Accessories, 3PCS LED Center Grille Raptor/Marker Lights with Wiring Harness & Add-a-Fuse & Screws, Compatible with 2018 2019 2020 Toyotaa Tundra TRD Pro Grill (White)
I just installed the Ironman bumper on my 2021 Tundra and had to disconnect the passenger and driver side front impact sensors from the stock bumper for my SRS air bag system. Where did you mount your sensors, as the Ironman bumper doesn't have a specified predrilled hole/location for them?
Been in serious debates on getting these vs the others at half the cost. Cool factor aside I want better low beams. Switchback is a plus. Cause like you said, fogs have to stay on lol
You guys should make videos on "while you have this part off you could also install....." lol great video
Solid point! Love it!
My OEM Tundra Halogens suck. They’re unsafe at night. My Morimoto LEDs arrived today. Better nights ahead.
Woohoo! For sure!
I just ordered one for my 2016 tundra sr5 will be back amd tell how it is
Sounds wonderful!! Hopefully all is going well!
The turn signal/hazards lights did not work after install, it kept blowing my 15 amp fuse in the fuse box. Solution: I unplugged the turn signal adapter and plugged the Morimoto connector directly into the factory turn signal connector. Other than that, love the lights.
That's bizarre! Feel free to reach out to our support email regarding this issue! support@trailgridpro.com
Can you do a review of the Ironman bumpers. Considering purchasing the same set
Yep, we will soon!
Where did you get the grill lights from! I want them so bad
YotaLED's!
@@TrailGridPro just ordered them thanks!
Is there a video on the turn signal adapter? I have to depin/repin the adapter to allow my turn signals and hazards to work for my 2014, but I can't seem to get the pins removed with any tools. Probably something easy, just not sure why it won't release and I don't want to break it. Thanks.
Unfortunately we do not have a video for that, but any thin metal object should pop those pins out. They're designed to be re-pinned, so you shouldn't have to worry about damaging anything!
looks like the tundra got some serious work since that rausch creek beating it took from the 4runner hahahaha
HAHAHAHA! Yessss, it sure has!
@Trail Grid Pro can you post a walk around on it at some point? From bumper looks awesome - tires look like 35s! Etc
Great vid! QQ - just purchased a used 15 Tundra and noticed that the truck came with some Morimoto headlights. I noticed that the passenger side turn signal sequential only goes halfway. Wondering if you happen to know if that’s due potentially a bad resistor ?
Call Morimoto customer service.
Yep, it could be that the remainder of the amber lights are out. Definitely call Morimoto and they can help out!
I have a 2018 tundra and when using the signal adapter, it blows the hazard fuses. When connecting it without everything works. Also noticed that the DRL doesn’t work either. OEM headlights are led and has DRL. Any suggestion on why this is happening? Thanks!
What bumpers are you running on that Pro?
Check out our new build update video!
I don't see the raptor grille lights for the Tundra on your website. Do you have them?
I bought mine on Amazon.
AUXLIGHT Car Accessories, 3PCS LED Center Grille Raptor/Marker Lights with Wiring Harness & Add-a-Fuse & Screws, Compatible with 2018 2019 2020 Toyotaa Tundra TRD Pro Grill (White)
Nope, we don't have any Tundra grille lights for sale on our site. We got them from another vendor!
I just installed the Ironman bumper on my 2021 Tundra and had to disconnect the passenger and driver side front impact sensors from the stock bumper for my SRS air bag system. Where did you mount your sensors, as the Ironman bumper doesn't have a specified predrilled hole/location for them?
Feel free to shoot us an email and we'll get some answers from Bryan himself!
Been in serious debates on getting these vs the others at half the cost. Cool factor aside I want better low beams. Switchback is a plus. Cause like you said, fogs have to stay on lol
Absolutely! We love them if that's any consolation!