It's something how if you know what you're listening to, with a little air compressor like that you can actually hear how robust the build of the product is. She's not screaming about and rattling around, it's a steady low pitch positive sounding hum. Much better quality than a $10 power fister princess auto or harbor fraud special that might last a couple dozen inflation cycles.
You have an awesome life. I'd love to have a ounce of the skill you have to be able to turn those lawn tractor in launching machines. I'd don't think you have a single video that you got a tractor and wasn't able to get it running? I absolutely love your channel. Keep the vids coming RNCG.
I think there are 4 videos in the last few years that have a machine I could not save in some form. But part of that is pre planning. I target machines I know I have on hand junk yard parts for.
I'm still amazed the, wound up being free, Artek is still holding up. Amazing what seemed like only a decade or so ago was for me a backup deep cycle battery and hand pump... is now all in one little automated light package. The JF.EGWO is handy to save space and time if your budget can afford. I totally recommend. I just brought back a HDS2185 and am wondering how I can mod a B&S or chonda (Duramax) Honda onto. Thinking before I disassemble more... maybe will do that to the AGS2130 since that engine came in a box and hasn't changed much. Time to watch more of your videos on those machines.
Awesome video!!!! Love the hoard! just started working on a free to me craftsman LT1000 ride on mower (no mowing deck). i am slowly working on making a mud mower, as parts/money allows. starting first on getting the engine going. I Love your videos. :)
Thanks for such an entertaining video with all those toys. I am deciding to purchase one of the 3400 if I can get another cable to bypass the timer/safety device so that I may have the benefit of Pure boost. The 3400 is just $10 more than the 3000 currently. Just subscribed.
I'd invest in A marine deep cycle 12-volt battery for that van to. If it takes 2 then i'd get two of them yes their salty price wise in the long run their worth it though. Check the charge in them to before reinstalling them to save you time having to wait on them to fully top off. Cause while your replacing that switch those could be charging up with both grounds connectted together for dual charging it's the para something I forgot how that word is spelled myself bro.
How well do the hydro units last like that lol also what engine is in that purple mower and did you modify the engine to get it to stay together at that rpm
you do know you shouldn't send her like that until its warmed up cuz it will expand the piston too fast and you really score the cylinder walls. It's not good for a 2 stroke either. I see so many people do this. Let it warm up for a few minutes at an idle then you can send her all the way
That's backwards there bud. The piston isn't buch a concern for a 4 cycle unless it's forged inches case it is not forged. I'd be more worried about wiping the lobs off the cam then scoring a cylinder in any 4 cycle. For a 2 stroke it is bad as the exhaust side of the piston gets hotter faster then the intake resulting in a cold seizing and absolutely wrecking the cylinder on the exhaust side scoring through the plating and or sleeve.
I wish they would send me one of them jump packs I would like to try one I do a lot of work on small engines and other things too. How do you go about getting one to try out?
Nothing with an FNR shifter. Poulan Pro and older Craftsman are my go to. The Shaft drive cub cadets are often cheap if you are good at sorting out wiring.
Hey man I’d comment on your 4-post lift video but comments were turned off, how has it held up?? I live in Las Vegas Nevada where it’s hot dry and dusty and I’ve been wanting to install one in my driveway
The big problem has never been the padding it has always been the wind. If the wind kicks up at all it sways and you have to bring it down and call it a day.
Why don't you change out the ignition in that Ford econline van their not hard at all. It has A bolt that holds it into place. You just half to disconect the battery.& drop the shifter down into nuetral then the twist screw is all you half to remove.& the wiring to actual key switch to. It's A reverse process to. As in backwards process to reinstall the ignition switch. Get the one that doesn't need to be reprogrammed unless you wan't type of one again. Their price is major differences to price wise also.
@redneckcomputergeek Hey brother I love the vids and how too’s. I saw in your Poulan video that you really like those earlier 2000s mowers in this vid th-cam.com/video/BT8gGHeYx78/w-d-xo.html. Any chance you have a spare left side/drivers headlight bucket? I have same mower from 08 and broke out the headlight bucket. I checked all the online stores with no luck. Really appreciate all you do. Bryan
@@redneckcomputergeek Thanks for answering brother. I’ll come access one sooner or later. Just looks ugly without the headlight socket on one side. We don’t mow at night lol
Good morning from the Pacific Northwest (Washington State)!
It's something how if you know what you're listening to, with a little air compressor like that you can actually hear how robust the build of the product is. She's not screaming about and rattling around, it's a steady low pitch positive sounding hum. Much better quality than a $10 power fister princess auto or harbor fraud special that might last a couple dozen inflation cycles.
M ŕ,ßaä
Awesome.I’m just smiling the whole time. Cheers
Haha I saw the thumbnail and thought the exhaust was glowing
You have an awesome life. I'd love to have a ounce of the skill you have to be able to turn those lawn tractor in launching machines. I'd don't think you have a single video that you got a tractor and wasn't able to get it running? I absolutely love your channel. Keep the vids coming RNCG.
I think there are 4 videos in the last few years that have a machine I could not save in some form. But part of that is pre planning. I target machines I know I have on hand junk yard parts for.
I'm still amazed the, wound up being free, Artek is still holding up. Amazing what seemed like only a decade or so ago was for me a backup deep cycle battery and hand pump... is now all in one little automated light package. The JF.EGWO is handy to save space and time if your budget can afford. I totally recommend. I just brought back a HDS2185 and am wondering how I can mod a B&S or chonda (Duramax) Honda onto. Thinking before I disassemble more... maybe will do that to the AGS2130 since that engine came in a box and hasn't changed much. Time to watch more of your videos on those machines.
I like the product so far. Grate camera work by the way.
Awesome video!!!! Love the hoard! just started working on a free to me craftsman LT1000 ride on mower (no mowing deck). i am slowly working on making a mud mower, as parts/money allows. starting first on getting the engine going. I Love your videos. :)
How’d it turn out?
Yes you also will half to remove the horn pad by the screws for it as we'll to so that your able to get to the screw to replace that switch with.
Dad why do you have a purse 😂😂
It’s a man-up you stubborn engine, starting bag!
Thanks for such an entertaining video with all those toys. I am deciding to purchase one of the 3400 if I can get another cable to bypass the timer/safety device so that I may have the benefit of Pure boost. The 3400 is just $10 more than the 3000 currently. Just subscribed.
Then you can reprogram the key switch to.& get A secondary key with lock.&unlock& alarm security all in one.
great video thanks 👍
I'd save the other money on the computer keyed ignition switch for A replacement front grille.& etc. That van still looks like it may need yet to.
Can you do a hydrostatic mud mower build k have a jd 116 and I’m trying to turn it into a mud mower
Ah a fellow Maineah
Nice I like it
Those screws should be on the bottom of the steering wheel.& both sides to.
Nice video buddy
I would love to see you swap an 820 into mud wizard. That would be a great video idea too: "mst 206 compared to an 820"
Its in the to be done list. Timing just has never worked out.
I'd invest in A marine deep cycle 12-volt battery for that van to. If it takes 2 then i'd get two of them yes their salty price wise in the long run their worth it though. Check the charge in them to before reinstalling them to save you time having to wait on them to fully top off. Cause while your replacing that switch those could be charging up with both grounds connectted together for dual charging it's the para something I forgot how that word is spelled myself bro.
Do you have videos on the racing mowers?
You should have tried Jesse’s truck, hasn’t it been sitting for a long time.
Incorporate a built in 0il drain pan into that unit and I'll buy one !*
How well do the hydro units last like that lol also what engine is in that purple mower and did you modify the engine to get it to stay together at that rpm
I seen John's new tractor in the background and I wondered what happend to his lawman lawnbird tractor can you make a video on what happens to it
We still have it the transaxle needs to be replaced.
you do know you shouldn't send her like that until its warmed up cuz it will expand the piston too fast and you really score the cylinder walls. It's not good for a 2 stroke either. I see so many people do this. Let it warm up for a few minutes at an idle then you can send her all the way
That's backwards there bud. The piston isn't buch a concern for a 4 cycle unless it's forged inches case it is not forged. I'd be more worried about wiping the lobs off the cam then scoring a cylinder in any 4 cycle. For a 2 stroke it is bad as the exhaust side of the piston gets hotter faster then the intake resulting in a cold seizing and absolutely wrecking the cylinder on the exhaust side scoring through the plating and or sleeve.
That's a nice jumper. I tried to jump a v8 with a dead battery and my fully charged $40 Walmart never start pack instantly died.
The price point seems to be at around $80 to $100 for something decent to do a v8
Awesome to know that those cheapy, ‘will start alls’ for $48 are junk and not worth messing with.
I’m curious as to if you’re just using stock brakes on the tractors.
Yes but our track has a good 300ft run out.
You ever work on those powermore 420ccs in the lower end MTD's? I just got one for free and I cant find many videos on them.
You will find very little on them cause the company refuses to sell parts to the general public.
That cubcadet has A bad starter soleniod in it. Cause I seen you had to trip start it for it to start up.& run.
I wish they would send me one of them jump packs I would like to try one I do a lot of work on small engines and other things too. How do you go about getting one to try out?
They came to me. Been using them going on 3 years now.
What lawn tractor would you recommend looking for in the used market? I heard good things about craftsman
Nothing with an FNR shifter. Poulan Pro and older Craftsman are my go to. The Shaft drive cub cadets are often cheap if you are good at sorting out wiring.
Craftsman t3000 hydro a good machine? Like 6 years old
What's the use of having the exhaust cover on the green lawn "tractor", if you didn't bother to tighten it to the pipe?🤣🤣🤣🤣
that's a nice booster pack but where's the furbie
Hey man I’d comment on your 4-post lift video but comments were turned off, how has it held up?? I live in Las Vegas Nevada where it’s hot dry and dusty and I’ve been wanting to install one in my driveway
The big problem has never been the padding it has always been the wind. If the wind kicks up at all it sways and you have to bring it down and call it a day.
GREAT VIDEO 👍 YOU BEEN ON THE HAIR DYE ? 🧐
My hair sucks it goes full fluff ball.
Don't complain mine has filed for divorce and it's leaving me as we speak !!
@@mrrallyeman389 haha. Mine too.
Junk yard parts man. You may even be able to find that ignition switch to.
Are you selling mowing mowers
Hey u wanna sell the craftsman wagon u just backed into?
any one got a head light cover for a craftsman lt4000 or know where I can find one
Why don't you change out the ignition in that Ford econline van their not hard at all. It has A bolt that holds it into place. You just half to disconect the battery.& drop the shifter down into nuetral then the twist screw is all you half to remove.& the wiring to actual key switch to. It's A reverse process to. As in backwards process to reinstall the ignition switch. Get the one that doesn't need to be reprogrammed unless you wan't type of one again. Their price is major differences to price wise also.
Lol
Is your cats name Lawanna
Yes and her twin brother is leroy
@redneckcomputergeek Hey brother I love the vids and how too’s.
I saw in your Poulan video that you really like those earlier 2000s mowers in this vid th-cam.com/video/BT8gGHeYx78/w-d-xo.html. Any chance you have a spare left side/drivers headlight bucket? I have same mower from 08 and broke out the headlight bucket. I checked all the online stores with no luck.
Really appreciate all you do.
Bryan
I am sorry I do not. Any bug eye hood on any brand tends to be broken more often. Not sure why but just always seems that way.
@@redneckcomputergeek Thanks for answering brother. I’ll come access one sooner or later. Just looks ugly without the headlight socket on one side. We don’t mow at night lol