What flat carbon spine size? If bamboo spine ,how thick ? What carbon bow size? If bamboo bow what thickness? And flat batten specs? Thanks for thenvideos!
flat carbon spine is 1mmx4mm, if i used bamboo, i would make it about 3/16" wide on the skin side and make the portion between the nose and the wingtip to wingtip line smaller in cross section by about 5-10% than the portion below the wingtip line. for the bow in the video the carbon is 1.5mm and for bamboo, i would make it so the tension/stiffness was between a 1.5mm & 0.06" diameter carbon rod stiffness. since each variety of bamboo is different, it's very difficult to make a suggestion for the bow cross sections.
![30 ชั่วโมงคนเดียว บนรถไฟชั้น 3 โซเวียต [Around The World Ep. 2]](http://i.ytimg.com/vi/MlE9boAVqDA/mqdefault.jpg)
What flat carbon spine size?
If bamboo spine ,how thick ?
What carbon bow size?
If bamboo bow what thickness?
And flat batten specs?
Thanks for thenvideos!
flat carbon spine is 1mmx4mm, if i used bamboo, i would make it about 3/16" wide on the skin side and make the portion between the nose and the wingtip to wingtip line smaller in cross section by about 5-10% than the portion below the wingtip line. for the bow in the video the carbon is 1.5mm and for bamboo, i would make it so the tension/stiffness was between a 1.5mm & 0.06" diameter carbon rod stiffness. since each variety of bamboo is different, it's very difficult to make a suggestion for the bow cross sections.
@@bruce.lambertThanks for the replies!