UV ink has a consistent matte finish without any additional varnish or layers. The gloss was then achieved with Spot Varnish applied on top of the print. 😊
The new Roland MG Series (the direct replacement for this model) can be equipped with an Extension Table, which allows you to run rigid sheets up to a maximum of 1.0mm thick, so based on this it's definitely a possibility.
@@granthamsgt is MG series any good? What are turnaround compared to solvent printer? (Ive seen your calculations resin vs eco solvent?) where uv printer stands in there?
@@recrafty8572 - it ultimately depends what you want to get out of a Printer. Each technology has its own advantages. For the MG, the main selling points would surround the white ink, instant cure, cold curing and low running costs. It doesn’t have production speed, but the LG would be an alternative to this, which is much faster. We don’t tend to recommend Solvent for white ink due to the high running costs, reduced speed and additional maintenance, however, nothing comes close to the vibrancy and quality of Solvent ink, which makes it great for vehicle graphics and motocross. That said, it’s recommended that you leave Solvent to cure over 24 hours before you cut, laminate or apply in order to get the best results and longevity. Resin / Latex also benefits from instant cure ink and the main selling point is that it’s odourless with major environmental benefits compared to Solvent and UV - as you’d expect, this can tick a lot of boxes for certain clients. Up to now, Roland Resin doesn’t offer a white ink option. In terms of cost analysis, UV will be fairly similar to Solvent but will be much cheaper to run when you account for White ink as well as power consumption. If you’re UK-based, feel free to drop me an email with what you’re looking for and I can break it down further. - Jamie Reader sales@granthams.co.uk
Hi Jay - I'm fairly confident you could technically print UV ink to a DTF Film, but it couldn't be used for the same purpose. DTF film requires a specific toner or garment ink and as far as I'm aware, there are no DTF films that support UV ink at this time.
Wow that printer prints like that ! These are nice
Hello, the back sticker is clear like this. What are the stickers called? Thank you.
The material is often referred to as Static Cling or Self-Cling Window Film.
Excellent.
wow man i cant wait to bag one of these
How did you get matte and gloss in a single print?! These are amazing.
UV ink has a consistent matte finish without any additional varnish or layers. The gloss was then achieved with Spot Varnish applied on top of the print. 😊
can it prints and cuts on solid PVC 0.5 mm?
The new Roland MG Series (the direct replacement for this model) can be equipped with an Extension Table, which allows you to run rigid sheets up to a maximum of 1.0mm thick, so based on this it's definitely a possibility.
@@granthamsgt is MG series any good? What are turnaround compared to solvent printer? (Ive seen your calculations resin vs eco solvent?) where uv printer stands in there?
@@recrafty8572 - it ultimately depends what you want to get out of a Printer. Each technology has its own advantages.
For the MG, the main selling points would surround the white ink, instant cure, cold curing and low running costs. It doesn’t have production speed, but the LG would be an alternative to this, which is much faster.
We don’t tend to recommend Solvent for white ink due to the high running costs, reduced speed and additional maintenance, however, nothing comes close to the vibrancy and quality of Solvent ink, which makes it great for vehicle graphics and motocross. That said, it’s recommended that you leave Solvent to cure over 24 hours before you cut, laminate or apply in order to get the best results and longevity.
Resin / Latex also benefits from instant cure ink and the main selling point is that it’s odourless with major environmental benefits compared to Solvent and UV - as you’d expect, this can tick a lot of boxes for certain clients. Up to now, Roland Resin doesn’t offer a white ink option.
In terms of cost analysis, UV will be fairly similar to Solvent but will be much cheaper to run when you account for White ink as well as power consumption.
If you’re UK-based, feel free to drop me an email with what you’re looking for and I can break it down further.
- Jamie Reader
sales@granthams.co.uk
You ever try DTF flim on this printer?
Hi Jay - I'm fairly confident you could technically print UV ink to a DTF Film, but it couldn't be used for the same purpose. DTF film requires a specific toner or garment ink and as far as I'm aware, there are no DTF films that support UV ink at this time.