YouTube Fan's Horizon Hobby Blade 330s gets a Tune and a Work Out
ฝัง
- เผยแพร่เมื่อ 25 ม.ค. 2020
- After some tail tuning and linkage adjustments, I had to show MattDBot just what his little Blade 330s helicopter could do now that I had blue printed and balanced that bad boy like a NASCAR with some NAPA know how. His heli is dialed now. Yes, It is bind and fly, but really good is not always Coe Show level. I want perfect. Blade helis rip with a little experience in set up and love for the hobby. Please click on this link to purchase your new Blade helicopter from Horizon Hobby. www.tkqlhce.com/click-9278956...
- วิทยาศาสตร์และเทคโนโลยี
![NONT TANONT - ดอกไม้ที่รอฝน (spring) - Reimagined [Live Session]](http://i.ytimg.com/vi/nY2PsFZFEOg/mqdefault.jpg)
Thanks again Coe! Learned so much in such a short time!! Your skills with helicopter goes way beyond just flying!! You are truly talented!
Very welcome
Flew it after work today and man what a huge difference!!
Thing rips!!
Horizon should have you do some tutorial videos for them!!
Would help a lot of us out with their products!!
Very welcome
mattdbot They do, but it is very technical and hard to follow, because of the way they make up names for the features. You can do a lot more things with these transmitters than it tells you in the damn manual. It is pretty amazing what you can do with it though.
Dialed in nicely. Fantastic job Justin! Small adjustments... got it.
Great videos, Thanks again.
I wish I knew of your channel like I said before I launched and crashed my 330s. I set it up like the manual and it was a mess on my first hover test. wow once you got that set up right it was so easy to fly. Idk what to do with mine and like I said HH wants to see it but I dont trust there techs.
Expo is good...Expo is wise...Thumbs Up!
Still flying mines flys well. Love this heli 👍👍
I wish I had this luxury. You could call him the heli whisperer.
You should see this guy today. Matt just got his first 550 electric. He's excited. I programmed it all perfect for him so he wouldn't have any issues.
With all of Coeshow619 help I have progressed quickly! I am extremely blessed to have his mentoring!! He knows helis more than the “manufactures”
Hey man, calling from Canada and learning lots from your vids, many thanks! You answered the question below about putting SAFE on idle up 1, and mentioned forward programming. I am using a DX6 and have been looking for a way to do this! Recently got in to a 230sV2 and would like to program this as I am not interested in 3D! I asked Great Hobbies and also Horizon, they say its hard coded into the receiver and not possible? There is another vid floating around where a guy has assigned Switch in P-Mix1 to A instead of bind? They advised against this. I really would like to get a 330s as well, can you do a vid or maybe comment a little more? This would make a HUGE difference in spending that money and flying with more confidence. Appreciate the reply, there is a promotion on till July 31, ready to jump, Les...
Hi, are you using the factory pitch and throttle curves? I'm wondering if you can post the pitch curves for each flight mode? I'm looking for blade pitch measurements at LOW/MID/HIGH stick. How much negative and positive pitch for each FM.
Hi my friend
already a big hello from France and a big thank you for your videos !!!!
little problem with my blade 330s: in stabilized mode after a few flight times, my helicopter translates on the right all alone to the point that I have to put it down because it becomes uncontrollable
it can come from what ?? !!
Hi Sam, we had the same issue with this heli. Find a flat surface, plug in battery. Let it initialize. Put in hold mode. Look at the swash plate from the rear of the heli. Is it tilted to the right? If so , lengthen the right side servo push rod two turns out. Is it level now? Once swash is level in hold mode at center stick, go to forward programming, go to system set up, click calibrate sensor, click begin, now click back to get out of menu. Is it level? Now take a flight my friend. That should be it. Thanks from USA. One love.
Thinking about getting 480 fusion with fr6250hx flybarless unit. Any thoughts on this
Yes, it is very strong, precise, and can handle 3d abuse well. The gyro is outstanding, although you will need to read up on PID tuning and what it does, and be able to watch a few of my how to videos to interpret what needs to be done in the transmitter and flybarless system in order to make it world class. I'd also say realize it's not a toy, and that it can hurt you if you don't follow the instructions and use loctite on your screws and pay attention. It is one of my favorite helis, and this is not your grandpas MCPX. Blade has come a very long way, and this product is a 10 star in my opinion. I mean that truthfully. Plus Horizon is on top with product support and customer service.
Hallo, Hast du die Gain an der Spektrum ausgeschaltet oder muss man den Gain an der Spektrum einschalten. Bei mir Zittert das Heck immer noch, bekomme es nicht hin. Vorlauf am Heck ca.12mm oder muss man es auf 0 Vorlauf Einstellen.
Bernd Hentsch Hallo, English. Danke. Gain in Forward Programing only. Gyro screen is inhibited in transmitter. PID adjustments.
Can I use a 3200 3S battery with the Blade 330 S
How did you setup stability mode on his radio
Go to forward programming, click on Safe, and this guy wanted safe on Normal mode and Idle up 1 but not stunt 2. Take heli out of hold, and click flight mode switch and make sure it changes on the safe screen. Assign it to any of those 3 positions.
@@CoeShow619 I appreciate all your help. Happy flying my friend
Bud I would send you mine and have you fix it and Id pay for the parts and labor and complete set up bc I just dont trust HH to do it. Let me know. Thanks Im Joe.