really good presentation Ryan, I also needed the red washer and thanks to you I managed to see the Kinetics kit number and went to Bunnings for the parts, and following your directions, managed to fix my toilet. Many thx
Watched all the videos. Changed the ball cock seal and the seat washer, took care to ensure the seating seal was tight against the inner lumen and the problem continues. I have adjusted the screw in both directions and I also cleaned the cistern surface facing the seat seal. The leak in to the toilet pan has diminished, but leak it still does. The inlet mechanism continues to his and bubble while never shutting off unless I manually lift the float arm the last little bit. I can only think that it might be the water level being too high and flowing in to the overflow but I cannot adjust the screw to produce the desired water level result. I have decided it would be easier to dig a 'drop dunny' out back, so I am off to dig now. Cheers.
nice video. i have replaced ballcock and the red washer. but the water does not stop filling in cistern. it has the soud of water going into cistern in very slow flow but you can hear the sound. it looks like the flot is not high enough to push down the ballcock washer. not sure if you have the same problem.
really good presentation Ryan, I also needed the red washer and thanks to you I managed to see the Kinetics kit number and went to Bunnings for the parts, and following your directions, managed to fix my toilet. Many thx
Glad I could help!
Watched all the videos. Changed the ball cock seal and the seat washer, took care to ensure the seating seal was tight against the inner lumen and the problem continues. I have adjusted the screw in both directions and I also cleaned the cistern surface facing the seat seal. The leak in to the toilet pan has diminished, but leak it still does. The inlet mechanism continues to his and bubble while never shutting off unless I manually lift the float arm the last little bit. I can only think that it might be the water level being too high and flowing in to the overflow but I cannot adjust the screw to produce the desired water level result. I have decided it would be easier to dig a 'drop dunny' out back, so I am off to dig now. Cheers.
If it's that hard, I'm looking for the closest plubmer! haha
Thanks mate your video was a great help.
You're most welcome. I hope that your toilet is no longer leaking :)
Thanks for the video! Gotta get that red thing which is ripped on ours and we have exactly the same setup. Cute dimples btw ;)
glad it was helpful
nice video. i have replaced ballcock and the red washer. but the water does not stop filling in cistern. it has the soud of water going into cistern in very slow flow but you can hear the sound. it looks like the flot is not high enough to push down the ballcock washer. not sure if you have the same problem.
no good... might be a plumber job...