I cleaned my calipers as I changed my pads a few days ago, I just sprayed the entire caliper with brake cleaner and scrubbed them with a brush and tea towel, did a pretty good job
You've earned a subscriber. Your videos are from the heart and made me laugh. I have to clean my calipers as well and I see now that the secret is using my wife's toothbrush. Off I go to get in trouble.
thank you for the great information .... I just today purchased a used cbr600rr and would like to know the book you are using to repairs and specs ....thank you
Hi I have set up my suspension back to standard in your other video. I weight 65kg and tyre pressures 34 36 feels grippy but how soft should I set my rear suspension. I love your work thankyou
@@TheOldMechanic can you give me tips for my weight? Follow your instructions then maybe a little extra half turn to suit my weight? The bottom is set to 3 so soften the top and bottom screes a little more on the rear? Thanks any help greatly appreciated
@@bc-mr1si Hi DC, not yet but I am sure that in time I will make a video about how to replace front fork seals too. Greetz from The Old Mechanic, ride save 👨🔧--->🏍
@@bc-mr1si Hi, when the front wheel is of the ground and you give it a spin, it should be turning around atleast a few times. There is allways a tiny drag felt you know. But if its more then just a slightly drag, I would replace the seals, and have a good look at the caliper pistons too.
Hi Michael, first get a look at the radiator if its not 'blocked', then check of the fan kicks in when the engine is hot.. (becarefull for your fingers huh..!!) Ofcoure check if the coolant level is okay. Then get the thermostat out..put it in water and heat it up and watch if it goes open... If thats all right.. then you could give your coolant system a good flush with a hose, and see what comes out.. Greetz from The Old Mechanic, ride save 👨🔧--->🏍 Don't forget to subribe to my channel. 👍
@@TheOldMechanic I have done all that myself on a 2005, they just run hot. Any tips on setting up a manually fan switch to turn fan on but not interfere with the sensor?
@@robertwermis2971 I made a drawing for you how you can connect a manual switch to turn your cooling fan on and off. Here is the dowload link. disk.yandex.com/i/4y_FFXVRXopUSg
The temperature rises to 100, then it stops starting, it cools down, and it starts up. What is the reason? Many thanks to you. Waqat Ali. It heats up to 75, then it stops starting, it cools down, and it starts up. What is the reason? Honda 2003 600cbrr
![HONDA CBR600RR [2003--] DRIVE CHAIN MAINTENANCE Made easy by: The Old Mechanic](http://i.ytimg.com/vi/7ytDtJkfaQQ/mqdefault.jpg)
![HONDA CBR600RR [2003--] DRIVE CHAIN MAINTENANCE Made easy by: The Old Mechanic](/img/tr.png)
![HONDA CBR600RR 2003-- BRAKE FLUID CHANGE [Front Calipers] Step BY Step. DIY Motorcycle Maintenance.](/img/n.gif)
your videos about cbr600rr is so informative.. thank you doing such.
Glad you like them! 🙏🏻👊🏻👍🏻😉
leuk om een hollander te zien die dit doet en het ook echt kan mijn complimenten beste monteur !
Thanks ! 👍🏍😉
I cleaned my calipers as I changed my pads a few days ago, I just sprayed the entire caliper with brake cleaner and scrubbed them with a brush and tea towel, did a pretty good job
You got my sub all day sir, i like your sense of humor
Thanks mate !
Really good videos, thank you for your easy ways to fix something in this bike 🙂 Do you wanna add more tutorials about 600rr in the future?
Yes 😉👍🏍
@@TheOldMechanic perfect 😁
Keep these videos comes always awesome to watch thank you
You've earned a subscriber. Your videos are from the heart and made me laugh. I have to clean my calipers as well and I see now that the secret is using my wife's toothbrush. Off I go to get in trouble.
Hi mate, thanks for subscribing. Don't worry about using your wife her toothbrush.. Just say..'the old mechanic told that to me !'..
Awesome Video!!! Thank You!! Great job!! 👍
Glad you liked it!
Good video Sr. Thanks for your work!
thank you for the great information .... I just today purchased a used cbr600rr and would like to know the book you are using to repairs and specs ....thank you
old mechanicさま。いつも楽しく見ています。整備するのは良い工具があれば便利ですが、必ず知恵を必要とする場合があります。歯ブラシはとても良い工具です。
身近なところに良い道具があります。
私も歯ブラシや真鍮ブラシは必ず使います。
これからも楽しい動画を見せてくださいね！
Thanks for your videos I appreciate them and your time helping me to fix my bike.
Funny guy thanks for making this 🇬🇧🇬🇧
🤛👍🏍
What is the name of the tool that pushes the pistons apart?
Greetings wise mechanic, I have just got a 2003 RR ,I'm very happy!, have you made a vlog on forks and fork oil ,
I'd be forkn thankful ✌
Not yet, but when I do I will make a video 😉🏍
FANTASTIQUE ☘
Brilliant video and you have to love a guy who can giggle at his own jokes……
😂🍻
Hi I have set up my suspension back to standard in your other video. I weight 65kg and tyre pressures 34 36 feels grippy but how soft should I set my rear suspension. I love your work thankyou
Nice to know 👍
@@TheOldMechanic can you give me tips for my weight? Follow your instructions then maybe a little extra half turn to suit my weight? The bottom is set to 3 so soften the top and bottom screes a little more on the rear? Thanks any help greatly appreciated
Nice review 👍l think is hard to find these days that good mechanics like you...👍 question...any recommendations how to clean exhaust?
Hi Agris thank you so much for your nice comment. I normaly use a car brush to clean my own bike, with just dish wash soap, that works great too
@@bc-mr1si Hi DC, not yet but I am sure that in time I will make a video about how to replace front fork seals too.
Greetz from The Old Mechanic, ride save 👨🔧--->🏍
@@bc-mr1si Hi, when the front wheel is of the ground and you give it a spin, it should be turning around atleast a few times. There is allways a tiny drag felt you know. But if its more then just a slightly drag, I would replace the seals, and have a good look at the caliper pistons too.
can you do a video on the same bike about coolant problems. I believe mine is overheat possible thermostat or a bad sensor but, I'm not 100% sure.
Hi Michael, first get a look at the radiator if its not 'blocked', then check of the fan kicks in when the engine is hot.. (becarefull for your fingers huh..!!) Ofcoure check if the coolant level is okay. Then get the thermostat out..put it in water and heat it up and watch if it goes open... If thats all right.. then you could give your coolant system a good flush with a hose, and see what comes out..
Greetz from The Old Mechanic, ride save 👨🔧--->🏍
Don't forget to subribe to my channel. 👍
@@TheOldMechanic I have done all that myself on a 2005, they just run hot. Any tips on setting up a manually fan switch to turn fan on but not interfere with the sensor?
@@robertwermis2971 I made a drawing for you how you can connect a manual switch to turn your cooling fan on and off.
Here is the dowload link.
disk.yandex.com/i/4y_FFXVRXopUSg
Bravooo🎉
👍🏻👊🏻😉
Just a silly question how can you adjust a motorcycle suspension without know the riders weight before you can properly adjust the suspension?
"I got my toothbrush...out of the bathroom..." Best line of 2023, said almost three years ago! 😂
You are the best
Wow.. thank you mate !!
hilarisch. ;)
The temperature rises to 100, then it stops starting, it cools down, and it starts up. What is the reason? Many thanks to you. Waqat Ali. It heats up to 75, then it stops starting, it cools down, and it starts up. What is the reason? Honda 2003 600cbrr
Clean the wife's tooth brush and put it back.lol
YEP..!
This mf funny 😂😂
😉👊🏻👍🏻
Ez nem fék generál,szét kell szedni teljesen