@@garrethrathjens9991 hi its been awhile since i made vids on this. I think i made a review about it before. I do recommend if you will get a machine now to go for a pen type. Specifically a mast archer.
Tengo la misma maquina, ahora tengo que poner un elástico porque no hace contacto y la aguja no baja. Hay alguna manera de arreglarlo o doy la maquina por perdida ya ? Gracias!
hi my bad didnt see this comment. for lining well some people like to line with 3.5mm stroke which this machine has as a preset. It hits hard so just find the right hand speed when you line to not cut people.
Hey man I just got one of these myself and was hoping it would come with some sort of how to guide haha. But it didnt, so being the worlds biggest newb to tattooing , do you have to tune this or is it good to go?
@@AndrueSOCAL mast archer are the best. Either the old 3.5mm or the archer s. The first mast archer is tried and tested. Mine still runs 4 years later. Checkout my vids on them and check the description.
Hi. Hmm I've been using the same machine for a bit under 2 years. I haven't changed my spring even once. The machine came with a strong spring. I guess its a high quality spring. I bought this off Amazon. Try going to a tattoo supply shop and bring your machine and ask them for a heavy duty spring. Make sure to lube the arm every now and then so that it flows more smoothly. It help the motor move better and lessen spring tension.
After watching the video.. again and again. Nakadecide na ako and consider ordering it yesterday.. ito lng kaya ng budget and planning it to use cartridge.. ano po masasuggest nyo sir?I hope i will not be regreting. Thank you so much..
@@francisjeanudque8147 hi go to Facebook and search dragonhawk tattoo supply ph. As for my knowledge baka pwede if may parang rod thing. Pero para sakin medyo weird ang linear drive with a cartridge.
I’ve had this machine 4 ‘months now. I’ve done 4 tattoos with it so far. It does great lining , and even better shading. Best $50 I ever spent !
Yeah I love this Machine I used it for 3 years.
the arm tattoos are cool 😎👍
Love the sleeves bro! 🙂🙌🏻
Any videos actually tattooing with the machine and final artwork/tattoo photos/videos?
@@garrethrathjens9991 hi its been awhile since i made vids on this. I think i made a review about it before. I do recommend if you will get a machine now to go for a pen type. Specifically a mast archer.
I love to use it with 3rl works awesome to me¡¡
Tengo la misma maquina, ahora tengo que poner un elástico porque no hace contacto y la aguja no baja. Hay alguna manera de arreglarlo o doy la maquina por perdida ya ? Gracias!
Hi, This machine is used to make solid line? For example 9rl or 11rl?
You can use it for bold line. Slower hand speed.
Also I notice u say alot that the machine is good for shading, what should I do to make it good for lining?
hi my bad didnt see this comment. for lining well some people like to line with 3.5mm stroke which this machine has as a preset. It hits hard so just find the right hand speed when you line to not cut people.
Thanks mate it is a great gun 👍
Brendan Lumm yup its a good tattoo machine.
I loved this video man, but how do you put the lube on it, can you tell me?
Put lube by the creases of the armature bar. Run the machine for 2 mins then clean. Or disassemble it and lube the armature itself.
Hey man I just got one of these myself and was hoping it would come with some sort of how to guide haha. But it didnt, so being the worlds biggest newb to tattooing , do you have to tune this or is it good to go?
Hi sorry late reply. This machine is good to go rotaries like this don't have any fine tuning options.
What about 4 years later are any of the dragonhawk direct drive machines good for lining ??
Get a dh pen these rotaries are left behind in the dust
@@TortugaPH what pen would you recommend
@@AndrueSOCAL mast archer are the best. Either the old 3.5mm or the archer s. The first mast archer is tried and tested. Mine still runs 4 years later. Checkout my vids on them and check the description.
@@TortugaPH awsome this is what I like to hear awsome info thank you
I got this machine about 4 months ago, once I hit 9v-9.5v it almost sounds like it's going to fall apart, any tips?
It's not meant to be used at that high a voltage. Best at 7-8 max
Also just get a mast archer or mast flip.
@@TortugaPH aaaah got it, no wonder. Thank you for the quick reply!
@@TortugaPH I saw your reviews on them and am in-between haha I will get one of those soon. Thank you bro
The spring inside always tents to break. Any solution for that?
Hi. Hmm I've been using the same machine for a bit under 2 years. I haven't changed my spring even once. The machine came with a strong spring. I guess its a high quality spring. I bought this off Amazon. Try going to a tattoo supply shop and bring your machine and ask them for a heavy duty spring. Make sure to lube the arm every now and then so that it flows more smoothly. It help the motor move better and lessen spring tension.
Had mine for 2 years, it needs a reset
After watching the video.. again and again. Nakadecide na ako and consider ordering it yesterday.. ito lng kaya ng budget and planning it to use cartridge.. ano po masasuggest nyo sir?I hope i will not be regreting. Thank you so much..
Hi hindi ito pang cartridge. Traditional needles Lang.
@@TortugaPH sabi daw kasi sa page nila pwede daw sa cartridge like magpurchase lng ng cart grip then its ready na po..
@@francisjeanudque8147 hi go to Facebook and search dragonhawk tattoo supply ph. As for my knowledge baka pwede if may parang rod thing. Pero para sakin medyo weird ang linear drive with a cartridge.
@@TortugaPH thank you po..ill be tuning in for your next videos...
@@francisjeanudque8147 sure no problem. It's a good machine but I highly suggest you try coils as well.